CRYSTAL OSCILLATOR (XO) (10 MHZ TO 1.4 GHZ)

Description The Si530/531 XO utilizes Silicon Laboratories’ advanced DSPLL® circuitry to provide a low jitter clock at high frequencies. The Si530/531 is available with any-rate output frequency from 10 to 945 MHz and select frequencies to 1400 MHz. Unlike a traditional XO, where a different crys

CRYSTAL OSCILLATOR (XO) (10 MHZ TO 1.4 GHZ)

Features  Available with any-rate output frequencies from 10 MHz to 945 MHz and select frequencies to 1.4 GHz  3rd generation DSPLL® with superior jitter performance  3x better frequency stability than SAW-based oscillators  Internal fixed crystal frequency ensures high reliability an

Single Low Jitter (XO)

Silicon Labs is pleased to announce rev 1.2 for the Si530

文件：170.98 Kbytes Page：2 Pages

Silicon Labs is pleased to announce rev 1.4 datasheet

文件：111.95 Kbytes Page：2 Pages

PRECISION CLOCK MULTIPLIER/REGENERATOR IC

Description The Si5310 is a fully integrated low-power clock multiplier and clock regenerator IC. The clock multiplier generates an output clock that is an integer multiple of the input clock. The clock regenerator operates simultaneously, creating a “clean” version of the input clock by using th

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 1:2 Fan-out Clock Buffer

KEY FEATURES • PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant • Two low-power PCIe clock outputs • Supports Serial-ATA (SATA) at 100 MHz • No termination resistors required for differential clocks • 2.5 V or 3.3 V Power supply • Spread Spectrum Tolerant • Extended Tempe

SIX-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Six 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  SMBus address configurable to

SIX-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Six 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  SMBus address configurable to

SIX-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Six 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  SMBus address configurable to

DB800ZL 8-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Eight 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  SMBus address is 0xD8  PLL or bypass mode  Spread spectrum tolerable  1.05 to 3.3 V power supply v

DB800ZL 8-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Eight 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  SMBus address is 0xD8  PLL or bypass mode  Spread spectrum tolerable  1.05 to 3.3 V power supply v

DB800ZL 8-OUTPUT PCIE GEN 3 BUFFER/ZERO DELAY BUFFER

Features  Eight 0.7 V low-power, push-pull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  SMBus address is 0xD8  PLL or bypass mode  Spread spectrum tolerable  1.05 to 3.3 V power supply v

PRECISION CLOCK MULTIPLIER/REGENERATOR IC

Description The Si5310 is a fully integrated low-power clock multiplier and clock regenerator IC. The clock multiplier generates an output clock that is an integer multiple of the input clock. The clock regenerator operates simultaneously, creating a “clean” version of the input clock by using th

PRECISION CLOCK MULTIPLIER/REGENERATOR IC

Description The Si5310 is a fully integrated low-power clock multiplier and clock regenerator IC. The clock multiplier generates an output clock that is an integer multiple of the input clock. The clock regenerator operates simultaneously, creating a “clean” version of the input clock by using th

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

DB1200ZL 12-OUTPUT PCIE GEN 3 BUFFER

Features  Twelve 0.7 V low-power, pushpull, HCSL-compatible PCIe Gen 3 outputs  Individual OE HW pins for each output clock  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresse

15-OUTPUT PCIE GEN3 BUFFER / ZERO-DELAY BUFFER

Features  Fifteen 0.7 V low-power, pushpull HCSL PCIe Gen3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers in

15-OUTPUT PCIE GEN3 BUFFER / ZERO-DELAY BUFFER

Features  Fifteen 0.7 V low-power, pushpull HCSL PCIe Gen3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers in

15-OUTPUT PCIE GEN3 BUFFER / ZERO-DELAY BUFFER

Features  Fifteen 0.7 V low-power, pushpull HCSL PCIe Gen3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers in

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

19-OUTPUT PCIE GEN 3 BUFFER

Features  Nineteen 0.7 V low-power, pushpull HCSL PCIe Gen 3 outputs  100 MHz /133 MHz PLL operation, supports PCIe and QPI  PLL bandwidth SW SMBUS programming overrides the latch value from HW pin  9 selectable SMBUS addresses  SMBus address configurable to allow multiple buffers

IRED

Features •Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type •Low power consumption •High radiant intensity Applications •Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in

Colorless transparency lens type

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Low power consumption • High radiant intensity Applications • Light source for remote control devices (This device should be only used at non- repetitive pulse mode)

IRED

Features •Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type •Low power consumption •High radiant intensity Applications •Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in

IRED

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Low power consumption Applications • Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in combination with PIN photodiodes or photot

IRED

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Low power consumption Applications • Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in combination with PIN photodiodes or photot

Colorless transparency lens type

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Low power consumption • High radiant intensity Applications • Light source for remote control devices (This device should be only used at non- repetitive pulse mode)

Colorless transparency lens type

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Low power consumption • High radiant intensity Applications •Light source for remote control devices (This device should be only usedat non- repetitive pulse mode)

IRED

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type •Low power consumption • High radiant intensity Applications •Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in com

IRED

Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type •Low power consumption • High radiant intensity Applications •Infrared remote control and free air transmission systems with low forward voltage and comfortable radiation angle requirements in com

Pin-Controlled 1_710 MHz Jitter Cleaning Clock

Description The Si5317 is a flexible 1:1 jitter cleaning clock for high-performance applications that require jitter attenuation without clock multiplication. The Si5317 accepts a single clock input ranging from 1 to 710 MHz and generates two low jitter clock outputs at the same frequency. The cl

Provides jitter attenuation and frequency translation between SONET/PDH and Ethemet

Description The Si5315 is a jitter-attenuating clock multiplier for Gb and 10G Synchronous Ethernet, SONET/SDH, and PDH (T1/E1) applications. The Si5315 supports SyncE EEC options 1 and 2 when paired with a timing card that implements the required wander filter. The Si5315 accepts dual clock inpu

ANY-FREQUENCY PRECISION CLOCK MULTIPLIER/ JITTER ATTENUATOR

Features  Generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz from an input frequency of 2 kHz to 710 MHz  Ultra-low jitter clock outputs as low as 290 fs rms (12 kHz–20 MHz), 320 fs rms (50 kHz–80 MHz)  Integrated loop filter with selectable loop bandwidth

SYNCHRONOUS ETHERNET/TELECOM JITTER ATTENUATING CLOCK MULTIPLIER

Features  Provides jitter attenuation and frequency translation between SONET/PDH and Ethernet  Supports ITU-T G.8262 Synchronous Ethernet equipment slave clock (EEC option 1 and 2) requirements with optional Stratum 3 compliant timing card clock source  Two clock inputs/two clock outp

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each clock

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each clock

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each clock

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 QUAD FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 QUAD FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 QUAD FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output

PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 FANOUT BUFFER

Features  PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant  Supports Serial ATA (SATA) at 100 MHz  100–210 MHz operation  Low power, push pull, differential output buffers  Internal termination for maximum integration  Dedicated output enable pin for each output