Low Capacitance Quad Line ESD Protection Diode Arry

General Description The SM05 of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD). TVS diodes are characterized by their high surge capability, low operating and cla

VOLTAGE 5 to 36 Volts WATT 300 Watts

FEATURES • Improved leakage current, maximum of 5 µA @ 5Vdc • Maximum capacitance @ 0 Vdc Bias of 1.2 pF between terminals 1-3 or terminals 2-3 • IEC61000-4-2 esd 15kV Air, 8kV contact compliance • IEC61000-4-5 lightning 17 Amps peak, 8x20 usec waveform • Pb free product are available : 99 Sn

USB 2.0 power and data line

Features ● Ultra low leakage: nA level ● Operating voltage: 5V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 12A

5V~12Volts ESD Protection Devices

Features • For sensitive ESD protection • Excellent clamping capability • Low leakage • ESD rating of class 3(>16KV)per Human Body Mode • Fast response ,response time less than 1ns. • Lead Free Finish/RoHS Compliant (P Suffix designates RoHS Compliant. See ordering information) • Epoxy

ESD PROTECTION

Features • For Sensitive ESD Protection • Excellent Clamping Capability • Low Leakage • Fast Response, Response Time Less than 1ns • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free. “Green” Device (Note 1) • Lead Free Finish/RoHS Compliant (P Suffix

TVS Diode Array

DESCRIPTION The SMxx Series is designed for applications requiring transient overvoltage protection capability. They are intended for use in voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment and other applications. T

TVS Diode Array

DESCRIPTION The SMxx Series is designed for applications requiring transient overvoltage protection capability. They are intended for use in voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment and other applications. T

TVS Diode Array

DESCRIPTION The SMxx Series is designed for applications requiring transient overvoltage protection capability. They are intended for use in voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment and other applications. T

2-Line Uni-directional TVS Diode Array

Features• 320W peak pulse power (8/20μs)• Protects one two uni-directional line(s) • Ultra low leakage: nA level• Operating voltage: 5V• Low clamping voltage• Complies with following standards:– IEC 61000-4-2 (ESD) immunity testAir discharge: ±30kVContact discharge: ±30kV – IEC61000-4-5 (Lightning

TVS Diode Array

Description The SM series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. TVS diodes are characterized by the

Transient Voltage Suppressor 500 Watt

Features ● SOT-23 Package For surface mount application ● Protects 3.0/3.3 up through 36V Components ● Protects 2 Unidirectional or 1 Bidirectional line ● Provides electrically isolated protection ● Tape & Reel EIA Standard 481.

TVSarray Series

DESCRIPTION (500 watt) This 3 pin Transient Voltage Suppresor offers 2 unidirectional or 1 bidirectional protection at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4. Unidirectional pro

DUAL SURFACE MOUNT TVS

Features • 300 Watts Peak Pulse Power (tP = 8x20µs) • IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV • Dual Common Anode TVS • SOT23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) •

5V~12Volts ESD Protection Devices

Features ● SOT-23 Package For surface mount application ● Protects 3.0/3.3 up through 36V Components ● Protects 2 Unidirectional or 1 Bidirectional line ● Provides electrically isolated protection ● Tape & Reel EIA Standard 481.

上海雷卯电子原厂提供TVS/ESD,欢迎免费索样021-50828806

文件：131.263 Kbytes Page：3 Pages

Low cap. diode array for 2 Line High Speed USB protection devic

文件：216.85 Kbytes Page：2 Pages

TVS Diode Array

文件：161.26 Kbytes Page：7 Pages

封装/外壳：TO-236-3，SC-59，SOT-23-3 包装：散装 描述：SOT23-3 电路保护 TVS - 二极管

TVS Diode Array

Description The SM series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. TVS diodes are characterized by the

TVS Diode Array

Description The SM series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. TVS diodes are characterized by the

2-Line Uni-directional TVS Diode Array

Features• 320W peak pulse power (8/20μs)• Protects one two uni-directional line(s) • Ultra low leakage: nA level• Operating voltage: 5V• Low clamping voltage• Complies with following standards:– IEC 61000-4-2 (ESD) immunity testAir discharge: ±30kVContact discharge: ±30kV – IEC61000-4-5 (Lightning

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

400W TVS Diode Array

Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning induced surges. The SM series can absorb repetitive ESD strikes above the maximum level specifed in the IEC 61000

RoHS compliant and lead-free

SM Series Description The SMxx-02HTG series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning induced surges. The SM series can absorb repetitive ESD strikes above the maximum level s

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

CERAMIC MELF PIN DIODES

DESCRIPTION This new line of ‘MELF’ high power PIN diodes are hermetically sealed surface mount packaged devices with full face bonded chips for low inductance construction. The MELF ceramic package has square end terminations which are ideal for surface mount and pick and place operations. The P

CMOS SINGLE-CHIP 4-BIT MICROCOMPUTER WITH A/D CONVERTER

CMOS SINGLE-CHIP 4-BIT MICROCOMPUTER WITH A/D CONVERTER

DUAL SURFACE MOUNT TVS

Features • 300 Watts Peak Pulse Power (tP = 8x20µs) • IEC 61000-4-2 (ESD): Air – 15kV, Contact – 8kV • Dual Common Anode TVS • SOT23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration • Lead-Free Finish; RoHS Compliant (Notes 1 & 2) •

1.25 mm pitch/Disconnectable Crimp style connectors

Developed for PDP, LCD or small electronics equipment. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.

1.25 mm pitch/Disconnectable Crimp style connectors

Developed for PDP, LCD or small electronics equipment. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.

1.25 mm pitch/Disconnectable Crimp style connectors

Developed for PDP, LCD or small electronics equipment. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.

NSH CONNECTOR 1.0 mm pitch/Disconnectable Crimp style connectors

1.0 mm pitch secure lock type connector. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector. ● Secure locking structure ● Contact lock structure ● Prevention

Disconnectable Insulation displacement connectors

[JST] Features • Ultra-compact insulation displacement connector 1.0mm (.039) pitch and only 3.0mm (.118) high (side entry type). This connector is only about 61 as large as the smallest conventional (JST) IDC designs. • Header designed for vacuum pick and place robotics Although this

Disconnectable Insulation displacement connectors

[JST] Features • Ultra-compact insulation displacement connector 1.0mm (.039) pitch and only 3.0mm (.118) high (side entry type). This connector is only about 61 as large as the smallest conventional (JST) IDC designs. • Header designed for vacuum pick and place robotics Although this

1.5mm pitch/Disconnectable Crimp style connectors

[JST] ZE CONNECTOR 1.5mm pitch secure lock type connector. Fork-shaped header contact provides the good mating feeling and secure mating operation. • Secure locking structure • Contact locking structure

2-Line Bi-directional TVS Diode

Features 80W peak pulse power(8/201s) Ultra low leakage: nA level Operating voltage: 5V Low clamping voltage Complies with following standards: — IEC 61000-4-2 (ESD) immunity test Air discharge: +30kV Contact discharge: +30kV — IEC61000-4-4 (EFT) 40A (5/50ns) —IEC61000-4-5 (Lightning) 8A

SM05S THRU SM10S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS

Features Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive product Lead tin plated copper This is a Pb − Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered up

Transient Voltage Suppressor Diode Array

Transient Voltage Suppressor Diode Array SOT−23 Dual Common Anode Diodes for ESD Protection These dual monolithic silicon TVS diodes are designed for applications requiring transient overvoltage protection capability. They are intended for use in voltage and ESD sensitive equipment such as com

Transient Voltage Suppressor Diode Array

Transient Voltage Suppressor Diode Array SOT−23 Dual Common Anode Diodes for ESD Protection These dual monolithic silicon TVS diodes are designed for applications requiring transient overvoltage protection capability. They are intended for use in voltage and ESD sensitive equipment such as com

SOT−23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration

Specification Features: • SOT−23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration • Working Peak Reverse Voltage Range − 5.0 V t o 36 V • Peak Power − 300 Watt (8/20 s) • Low Leakage − 1.0A • Flammability Rating UL 94 V−0 • The

SOT−23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration

Specification Features: SOT−23 Package Allows Either Two Separate Unidirectional Configurations or a Single Bidirectional Configuration Working Peak Reverse Voltage Range − 5.0 V t o 36 V Peak Power − 300 Watt (8/20 s) Low Leakage − 1.0A Flammability Rating UL 94 V−0 These are Pb−Free Dev

TVS Diode Array

Features Transient protection for high speed data lines to IEC 61000-4-2 (ESD) + 30kV (air), + 30KV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Working voltages : 5V Protects one bidirectional line or two unidirectional lines Low operating and clamping voltages Solid-state silicon avalanche

TVS Diode Array

Description The SM series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. TVS diodes are characterized by the

TVS Diode Array

Description The SM series of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning. TVS diodes are characterized by the

TVS Diode Array

文件：161.26 Kbytes Page：7 Pages

TVS Diode Array

文件：161.26 Kbytes Page：7 Pages

封装/外壳：TO-236-3，SC-59，SOT-23-3 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：SOT-23 电路保护 TVS - 二极管

TVS Diode Array

文件：161.26 Kbytes Page：7 Pages

Low Capacitance Quad Line ESD Protection Diode Array

文件：292.75 Kbytes Page：6 Pages

Surface Mount Devices

文件：1.13492 Mbytes Page：3 Pages

CONTROL DEVICES Surface Mount-Melf pin diodes

文件：166.04 Kbytes Page：3 Pages

500-2000 MHz 4 Watt Linear Power Amplifier

文件：93.25 Kbytes Page：3 Pages

500-2000 MHz 4 Watt Linear Power Amplifier

文件：93.25 Kbytes Page：3 Pages

500-2000 MHz 4 Watt Linear Power Amplifier

文件：93.25 Kbytes Page：3 Pages

500-2000 MHz 4 Watt Linear Power Amplifier

文件：93.25 Kbytes Page：3 Pages

0.5 A Glass Passivated Surface Mount Rectifiers

文件：272.83 Kbytes Page：3 Pages

Technical Information on SMPS Capacitors

文件：182.57 Kbytes Page：18 Pages