Complementary Transistors

Integrated Circuit Color TV Chroma Processor

Features: ● AFPC & ACC detector employs sample and Hold techniques ● Low output impedance ● Only the initial crystal filter tuning is required ....... no killer and ACC adjustment at anytime ● Few external components required ● Compensation for temperature and Supply Variations ● Co

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder

Features: ● Requires No Inductors ● Low External Part Count ● Only Oscillator Frequency Adjustment Necessary ● Integral Stereo/Monaural Switch 75mA Lamp Driving Capability ● Wide Dynamic Range: Typically up to 1.3V(RMS) Composite Input Signal ● Wide Supply Voltage: 8V to 16V ● Excellent Cha

Integrated Circuit CMOS, Phase Comparator

Description: The NTE1208 is an integrated circuit in a 9–Lead SIP type package consisting of a digital phase comparator and an amplifier. Three state output connected to low pass filter (using an internal amplifier) will produce DC voltage to control a VCO. Low state pulses appear on phase out a

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

Germanium PNP Transistor Audio Frequency Power Amplifier

Description: The NTE121 is a Germanium PNP Alloy Junction transistor in a TO3 type package designed as an audio frequency power output amplifier.

Integrated Circuit Preamp w/ALC

Description: The NTE1210 is a low–noise, high–gain preamplifier with a built–in ALC (automatic level control) circuit in a 9–Lead SIP type package designed for use as a record/playback preamp in cassette tape recorders. Features: • Wide ALC Range • Wide Range of Working Power Supply

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

Integrated Circuit TV Video IF Amp

Functions: • 1st Video IF Amplifier • 2nd Video IF Amplifier • Forward AGC Amplifier • Reverse AGC Amplifier

Integrated Circuit AM Tuner System

Description: The NTE1214 is a high integrated circuit in a 16–Lead DIP type package designed for use in the AM system of high grade receivers. This device contains most of the functions needed for AM receiving. Features: • RF Amplifier Stage: Good quieting sensitivity by means of

Integrated Circuit Stereo Equalizer Amplifier

Features: Good Voltage and Thermal Regulation Small Shock Noise at Switching ON Low Distortion, High S/N Absolute Maximum Ratings: (TA = +25°C, unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 15V

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

Integrated Circuit Phase Lock Loop (PLL) FM Multiplex Stereo Demodulator

Features: • Low Level of Pilot Signal Sensitivity: 7mV • Gain: 0dB (RL = 3.3kΩ) • Separation Adjustable • Low Level of Pop Noise • Excellent SCA Rejection Ratio

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 7W/Ch

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 7W/Ch

Integrated Circuit Dual Audio Power Amp, 15 W/Ch

Integrated Circuit Dual Audio Power Amp, 15 W/Ch

Integrated Circuit Stereo Preamp

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax 25V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Collector–Base Voltage (Q1), VCBO . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Integrated Circuit Low Noise High Gain Pre−Amplifier Circuit For General Purpose Audio Pre−Amplifiers

Features: • External initial stage emitter resistor which determines feedback voltage gain and assures better temperature characteristics.

Integrated Circuit Audio Power Amplifier, 1W

Description: The NTE1224 is a linear integrated circuit designed for use as a 1 Watt Audio power Amplifier. Its typical application is radio and stereo amplifiers and is driven by a single DC supply or rectified OC.

Integrated Circuit Audio Power Amp, 2.1W

Features: • AF Output Power • Sufficient Regulation Under Dry Battery Operation

Silicon NPN Transistor General Purpose Audio Amplifier, Switch

Silicon NPN Transistor General Purpose Audio Amplifier, Switch

Integrated Circuit FM Multiplex Stereo Demodulator

Description: The NTE1230 is a monolithic integrated circuit in a 16–Lead DIP type package designed for use as an FM stereo multiplex demodulator. This device includes 2 channel amplifiers that can make the 0dB line output.

Integrated Circuit Complete 4 Watt TV Sound Channel

Description: Capable of carrying out all of the functions of a TV sound channel, the NTE1231 and NTE1231A silicon monolithic integrated circuits consist of a six–stage IF amplifier/limiter, low–pass filter, differential peak detector, DC volume control, regulated power supply, audio preamplifier,

Integrated Circuit Complete 4 Watt TV Sound Channel

Description: Capable of carrying out all of the functions of a TV sound channel, the NTE1231 and NTE1231A silicon monolithic integrated circuits consist of a six–stage IF amplifier/limiter, low–pass filter, differential peak detector, DC volume control, regulated power supply, audio preamplifier,

Integrated Circuit Audio Amplifier for Car Radio, 8W

Description: The NTE1232 is a Class B audio amplifier in a 5–Lead TO220 type package designed for driving low impedance loads (down to 1.6Ω). This device provides a high output current capability (up to 3.5A), very low harmonic and cross–over distortion. Features: • Low Number of Extern

Integrated Circuit Frequency Synthesizer

Description: The NTE1233 consists of a crystal oscillator, 10 bit divider, phase comparator and a programmable divided−by−N 9 bit counter constructed with complementary MOS device in one chip monolithic structure. This device has been designed for use in frequency synthesizers and phase locked

Integrated Circuit FM IF Amplifier

Description: The NTE1234 is designed for use in FM IF and TV sound IF amp applications. This device contains 3 different stage differential IF amp and a differential peak detector function. Features: • Excellent AM Rejection: (AMR = 50db typ.) • High Sensitivity: (VIN(lim) = 50dBµV t

Integrated Circuit Squelch Amp

Integrated Circuit Squelch Amp

Integrated Circuit TV Sound IF System

Description: The NTE1236 monolithic TV/FM sound system consists of a multistage limiting IF amplifier, DC gain control, FM detector, and an audio driver constructed on a single silicon chip. Excellent sensitivity, high AM rejection and an internally regulated power supply coupled with low exter

Integrated Circuit AM Radio without Audio Stage

Features: • Small External Part Count • Tuning Meter Circuit • Wide AGC Range

Silicon Complementary Transistors General Purpose

Description: The NTE123A (NPN) and NTE159M (PNP) are widely used “Industry Standard” complementary transistors in a TO18 type case designed for applications such as medium–speed switching and amplifiers from audio to VHF frequencies. Features: ● Low Collector Saturation Voltage: 1V (Max) ● Hig

Silicon NPN Transistor Audio Amplifier, Switch (Compl to NTE159)

Silicon NPN Transistor Audio Amplifier, Switch (Compl to NTE159)

Silicon NPN Transistor High Voltage Power Output

Description: The NTE124 is a general purpose transistor in a TO66 type package designed for high speed switch ing, linear amplifier applications, high voltage operational amplifiers, switching regulators, converters, inverters, deflection stages, and high fidelity amplifiers. Features:

Integrated Circuit Audio Power Amp, 5.5W

Features: High Output Power and High Gain Highly Breakdown−Resistant Against Overloading and Short−Circuits Easy−to−handle packaging: 11−lead SIL plastic Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . .

Integrated Circuit Head Coil/Meter Driver

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . 15V Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 550mW Operating Tempe

Integrated Circuit FM/AM IF Amp, AM Converter

Features: Separate AM and FM Circuitry Ceramic Filters Can be Used. Same AM and FM Detection Output Level Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.6V Circuit

Integrated Circuit Phase Lock Loop (PLL) FM Multiplex Stereo Demod

Description: The NTE1248 is a phase lock loop (PLL) system monolithic integrated circuit in a 16–Lead DIP type package designed as an FM multiplex stereo demodulator. Features: A PLL for High Multiplex–Efficiency Operation. Stable Operation at Low Voltages (VCC = 5.4V Min) Low Lam

Integrated Circuit Balancd Modulator

Description: The NTE1249 is a balancd modulator circuit in a 7–Lead SIP type package designed for use in SSB CB equipment. Features: Low Operating Voltage High Carrier Suppression Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . .

General Purpose Silicon Rectifier

Description: The NTE125 is a general purpose silicon rectifier in a DO41 case designed for low power and switching applications.

Integrated Circuit Phase-Lock Loop (PLL) Frequency Synthesizer for CB

Features: • Programmable Divider – Divided by 3 to 255 • 10–Bit Divider • Phase Detector • Reference Oscillation Circuit • On–Chip Filter Amplifier • Code Converter • Only two or three crystals required for CB radio AM frequency selection • Unlocked signals are detected at

Germanium Mesa Transistor, PNP, for High-Speed Switching Applications

Germanium Mesa Transistor, PNP, for High–Speed Switching Applications

Integrated Circuit Record/Playback Circuit for VCR

Features: • Recording/Playback Circuit with Minor Modifications in Peripheral Circuitry • Wide Application: Capable of Mic. Mixing and Variable Sound Monitoring • Wide Suply Voltage Range: 3V to 14V • Built−in AGC Circuit of Wide Control Range and Low Distortion • High Density Integ

Integrated Circuit Video AGC Circuit for VCR

Integrated Circuit Video AGC Circuit for VCR

Integrated Circuit Color AGC Circuit for VCR

Integrated Circuit Color AGC Circuit for VCR

Integrated Circuit DC Servo Circuit for VCR

Description: The NTE1268 is an integrated circuit in a 28–Lead DIP type package designed for DC Servo Control Circuits in VCR’s.

Germanium PNP Transistor Horizontal Output Amplifier

Germanium PNP Transistor Horizontal Output Amplifier

Integrated Circuit Control Voltage Generator

Description: The NTE1271 control voltage generator with three outputs is fabricated with bipolar linear technology. Two alternately exchangeble outputs are provided for two stabilized output levels controlled by an external signal. The NTE1271 is packaged in a 8−Lead SIP package with a heat

Integrated Circuit Dual, Audio Power Amp, 5W/Ch

Description: The NTE1273 is a bipolar monolithic integrated circuit in a 20−Lead DIP type package. This 2 channel audio power amplifier is ideal for use in high power car radio applications. Features: • Low Distortion • Self centering Bias • High Peak Output Current • Dual Chan

Integrated Circuit Audio Power Amp, 5.8W

Features: • Few External Parts Required • Adjustable Closed−Loop Gain • High Sustaining Over Voltage • Excellent Ripple Rejection • High Power and Low Distortion • Audio Muting Circuit • Protection Circuit for Load Short, Excessive Supply Voltage, and Thermal Shutdown

Silicon Complementary Transistors Audio Output, Video, Driver

Description: The NTE128 (NPN) and NTE129 (PNP) are silicon complementary transistors in a TO39 type package designed primarily for amplifier and switching applications. These devices features high breakdown voltages, low leakage currents, low capacity, and a beta useful over an extremely wide c

Integrated Circuit Module − Hybrid, Audio Power Amplifier, 50W

Features: 2 Power Supplied Required Darlington Type Pure Complementary Output Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltatge, VCCmax . . . . . . . . . . . .. . . . . . . . . . . . . ±53V Collector Current, ICmax . . . . . . . . . . . .

Integrated Circuit Module − Hybrid, Audio Power Amplifier, 35W

Features: • 2 Power Supplied Required • Darlington Type • Quasi−Complementary Output

Integrated Circuit Audio Power Amplifier, 5.8W

Description: The NTE1285 and NTE1286 are audio power amplifiers in a 7–Lead SIP type package designed especially for car radio and car stereo applications. These devices are encapsulated in newly developed small packages featuring low thermal resistance, providing easy design for 2Ω. At 14.4V t

Integrated Circuit Audio Power Amplifier, 5.8W

Description: The NTE1285 and NTE1286 are audio power amplifiers in a 7–Lead SIP type package designed especially for car radio and car stereo applications. These devices are encapsulated in newly developed small packages featuring low thermal resistance, providing easy design for 2Ω. At 14.4V t

Integrated Circuit Audio Power Amplifier, 10W for Car Radio

Description: The NTE1288 has improved performance with the same pin configuration as the NTE1232. The additional features of the NTE1232; very low number of external components, ease of assembly, space and cost saving, are maintained. The device provides a high output current capability (up to

Integrated Circuit TV Vertical Deflection System

Description: The NTE1289 is a monolithic integrated circuit in a 12–Lead quad in–line package designed for use in black and white and color TV receivers. Features: • Synchronization Circuit • Oscillator and Ramp Generator • High Power Gain Amplifier • Flyback Generator • Vol

Silicon Complementary Transistors General Purpose Amp

Description: The NTE128P (NPN) and NTE129P (PNP) are silicon complemedntary transistors designed for use in general purpose power amplifier and switching applications. Features: • High VCE Ratings • Exceptional Power Dissipation Capability

Silicon Complementary Transistors Audio Output, Video, Driver

Description: The NTE128 (NPN) and NTE129 (PNP) are silicon complementary transistors in a TO39 type package designed primarily for amplifier and switching applications. These devices features high breakdown voltages, low leakage currents, low capacity, and a beta useful over an extremely wide c

Integrated Circuit AM Tuner for Car Radio

Features: • Complete 1–Chip AM Tuner • Good High–Input Characteristics Provided with Automatic Dynamic Range Mag. Control at RF State (THD = 1 Typ. at 130dBµ) • High AGC FOM (63dB Typ) • Good Usable Sensitivity (23dBµ Typ.) • Low Distortion (0.4 Typ. at 74dBµ) • Good Beat Charact

Integrated Circuit IF Amplifier and Detector

Description: The NTE1292 is a monolithic integrated circuit in a 14–Lead DIP type package specifically designed for audio detection in TV and FM radio receivers. It incorporates an 8–stage limiting IF amplifier and balanced detector plus a DC operated volume control. Pin3 and Pin4 are connec