Silicon NPN Transistor UHF Low Noise Wide.Band Amplifier

Features: ● Low Noise Figure: NF = 2.2dB Typ (f = 0.9GHz) ● High Power Gain: MAG = 14dB Typ (f = 0.9GHz) ● High Cutoff Frequency: fT = 5GHz Typ

Bi-Polar transistor Selector Guide

Germanium Complementary Transistors Oscillator, Mixer for AM Radio, Medium Speed Switch

Germanium Complementary Transistors Oscillator, Mixer for AM Radio, Medium Speed Switch

Integrated Circuit FM IF TV Amp

Features: ● Excellent Limiting Characteristics ● High Gain ● High AM Rejection Ratio ● Wide Band Amp

Integrated Circuit FM/AM IF Amplifier

Description: The NTE1003 monolithic integrated circuit is a high grade FM/AM intermediate frequency amplifier in a 14–Lead DIP type package composed of four individual amplifiers and a voltage regulator. Features: ● Composed of Four Individual Amplifiers ● Low Power Consumption ● High Gain ●

Integrated Circuit FM Stereo Demodulator

Features: ● 19kHz and 38kHz Coils ● SCA Rejection Ratio: 50dB ● No Special Adjusting Needed for SCA Rejecting ● Also Seperation Controller Functions: Composite signal amp., doubler, decoder, separation controller, and lamp driver

Integrated Circuit FM Multiplex Stereo Demodulator

Description: The NTE1006 is an integrated circuit in a 14–Lead DIP type package designed for use as an FM multiplex stereo demodulator. This device includes all the fundamental functions including a composite amp, doubler, decoder, separation controller, and lamp driver. Features: ● Suitable fo

Integrated Circuit AF Power Amplifier, 1W

Integrated Circuit AF Power Amplifier, 1W

Integrated Circuit Module − Hybrid, 27MHz OSC AM IF

Integrated Circuit Module − Hybrid, 27MHz OSC AM IF

Integrated Circuit Module - Hybrid, RF Amp/OSC

Description: The NTE1014 is an integrated circuit in a 9–Lead Staggered SIP type package designed for use as an oscillator and RF power output of a wireless microphone.

Integrated Circuit AF Small-Signal Amplifier for Tape Recorder

Integrated Circuit AF Small–Signal Amplifier for Tape Recorder

Integrated Circuit Module, Hybrid, Low Noise Equalizer Amp

Integrated Circuit Module, Hybrid, Low Noise Equalizer Amp Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Power Dissipation, PDmax . . . . . . . . . . . . . . .

Germanium Complementary Transistors Power Output, Driver

Description: The NTE102 (PNP) and NTE103 (NPN) are Germanium complementary transistors designed for medium–speed saturated switching applications. Features: ● Low Collector–Emitter Saturation Voltage: VCE(sat) = 200mV Max @ IC = 24mA ● High Emitter–Base Breakdown Voltage: V(BR)EBO = 12V Min @

Integrated Circuit 4-Channel Stereo Decoder

Integrated Circuit 4–Channel Stereo Decoder

Integrated Circuit Module - Hybrid, Audio Power Amplifier

Integrated Circuit Module – Hybrid, Audio Power Amplifier

Integrated Circuit Module, Hybrid OSC/Buffer

Integrated Circuit Module, Hybrid OSC/Buffer

Integrated Circuit Module - Hybrid, Audio Power Amplifier

Integrated Circuit Module – Hybrid, Audio Power Amplifier

Integrated Circuit Module, Hybrid, Audio Power Amp 20W

Description: The NTE1028 is a 20 Watt Audio Power Amplifier which requires 2 power supplies.

Integrated Circuit Audio Power Amplifier, 3.5W

Features: ● SRPP Circuit (Shunt−Regulated Push−Pull Circuit) High Operating Stability on DC and AC ● High Voltage Gain: 44dB (Typ) ● Low Thermal Resistance: 10°C/W (Max)

Germanium Complementary Transistors Medium Power Amplifier

Description: The NTE102A (PNP) and NTE103A (NPN) are Germanium complementary transistors in a TO1 type package designed for use as a medium power amplifier. Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Collector–Base Voltage, VCBO . . . . . . . . . . . . . . . . ..

Linear Integrated Circuit,OTL Audio Power Amp, 1W

Linear Integrated Circuit, OTL Audio Power Amp, 1W

Integrated Circuit FM IF Amplifier

Description: The NTE1039 is a silicon monolithic integrated circuit designed for use as a FM−IF amplifier. It features the capability of nonsaturating limiter operation with a suitable output load, rendering it ideally adaptable to FM−IF limiter applications. Applications: ● FM−IF Limiter Ampli

Germanium PNP Transistor Audio Frequency Power Amplifier

Description: The NTE104 is a Germanium PNP Alloy Junction transistor in a TO3 type package designed as an audio frequency power output amplifier.

Integrated Circuit FM IF Amp

Description: The NTE1040 is a silicon monolithic integrated circuit designed for FM−IF Amplifiers. This device features the capability of nonsaturating limiter operation with a suitable output load, rendering it ideally adaptable to FM−IF limiter application. Applications include FM−IF limiter a

Integrated Circuit FM IF Amplifier

Integrated Circuit FM IF Amplifier

Integrated Circuit 3 Stage FM IF Amplifier

Integrated Circuit 3 Stage FM IF Amplifier

Integrated Circuit Audio Amplifier for Tape Recorder

Features: ● No Transformer Required thanks to Complementary Output Circuit ● Excellent Equalizer Characteristics ● Low–Distortion Recording even if Volumeless because of AGC Circuit Wide Dynamic Range ● Wide Supply Voltage Range: VCC ≥ 4V

Integrated Circuit TV AFC Circuit

Integrated Circuit TV AFC Circuit

Integrated Circuit AM Tuner w/RF Amp

Integrated Circuit AM Tuner w/RF Amp

Germanium PNP Transistor Audio Power Amp

Description: The NTE105 is a germanium PNP power transistor in a TO36 type package designed for use in power switching and amplifier applications.

Integrated Circuit Low Noise Preamp

Description: The NTE1052 is a silicon monolithic preamplifier in a 7−Lead SIP type package intended for a variety of applications requiring low noise, high gain, high output voltage and extremely stable operating characteristics over a wide range of supply voltage and temperature. Typical applica

Integrated Circuit AF High Gain Preamplifier

Integrated Circuit AF High Gain Preamplifier

Integrated Circuit FM/AM IF Amp

Integrated Circuit FM/AM IF Amp

Integrated Circuit FM/AM IF Amp

Integrated Circuit FM/AM IF Amp

Integrated Circuit FM Stereo Multiplex Demodulator

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

Integrated Circuit FM IF Amplifier, AF Pre−Amplifier

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage V10−14, V11−14, V9−8 . . . . . . . . . . . . . . . . . . . . 15V V2−1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Vp−p V9−7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Integrated Circuit Audio Power Amp, 4.4 Watts

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, V9−2 . . . . . . . . . .. . . . . . . . . . . . . . . . . 18V Supply Current, Itot . . . . . . . . . .. . . . . . . . . . . . . . . . . 1.2A Power Dissipation, PT . . . . . . . . . . . . . . . . . . . . . .

Silicon PNP Transistor Switching Transistor

Silicon PNP Transistor Switching Transistor

Integrated Circuit AM-RF Amp, Mix/OSC, FM-AM IF Amp

Description: The NTE1060 is an integrated circuit designed for FM/AM radio receiver applications. The AM section consists of an AM–RF amplifier, a frequency converter and an IF amplifier circuit. The FM section has an IF amplifier circuit. Features: ● Improved Stability because the FM and AM Se

Silicon NPN Transistor UHF Oscillator for Tuner

Description: The NTE107 is a silicon NPN planar epitaxial transistor in a TO92 type package designed specifically for high frequency applications. This device is suitable for use as an oscillator in UHF television tuners.

Integrated Circuit FM-AM IF Amp & AF Amp

Integrated Circuit FM–AM IF Amp & AF Amp

Integrated Circuit AM−RF Amplifier, Mis, OSC FM−IF Amplifier

Integrated Circuit AM−RF Amplifier, Mis, OSC FM−IF Amplifier

Integrated Circuit Audio Power Amplifier, 1W

Integrated Circuit Audio Power Amplifier, 1W

Silicon NPN Transistor High Frequency Amplifier

Description: The NTE108 is a silicon NPN transistor in a TO92 type case designed for low–noise, high–frequency amplifiers, 1GHz local oscillatore, non–neutralized IF amplifiers, and non–saturating circuits with rise and fall times less than 2.5ns.

Integrated Circuit TV Video Processor

Features: • For Reverse AGC • Sufficient Gain and Quieting Sensitivity • Stable Gain Over the Wide Band • Small Wave Distortion with AGC

Integrated Circuit Audio Power Amplifier, 4.8W

Integrated Circuit Audio Power Amplifier, 4.8W

Integrated Circuit FM IF Amplifier

Description: The NTE1082 is a silicon monolithic integrated circuit intended for usa as a three−stage FM IF amplifier having exceptionally high voltage gain and limiting characteristics. From pin 1 the stabilized voltage can be applied to the mixer stage.

Integrated Circuit Hybrid, Dual High Gain Pre−Amplifier

Integrated Circuit Hybrid, Dual High Gain Pre−Amplifier

Integrated Circuit Low Noise Audio Preamp

Features: • Low Noise: VNI = 0.8µVrms(Typ) • High Open Loop Voltage Gain: GVO = 92dB (Typ) • Low Distortion: THD = 0.1 (Max) at VOUT = 7Vrms, GV = 40dB, f= 1kHz

Integrated Circuit Low Noise Preamp

Description: • General–Purpose Pre–Amplifier • Voltage Amplifier Application • Low Noise • Operates from a Wide Range of Power Supplies • High Voltage Gain

Germanium Diode Fast Switching General Purpose

Description: The NTE109 is a high conductance device with good switching characteristics for low impedance circuits, high resistance–high conductance for efficient coupling, clamping and matrix service, and forward and inverse pulse recovery for critical pulse applications.

Integrated Circuit TV AFT, High Frequency Wide-Band Amplifier/Phase Detector

Description: The NTE1096 is an IC for use in TV circuits, especially for Automatic Frequency Tuning. It contains a wide−band amplifier and phase detector. Features: ● VCC of 100V ±10 due to Dual Zener Regulation

Integrated Circuit Audio Power Amplifier, 5W

Features: ● 4−Watt Power Output into 4Ω Load at VCC = −14V, THD = 10 ● Low Distortion (0.4 typ. at f = 1kHz, PO = 2W) ● High Efficiency (60 at 4W) ● Transformerless in Input and Output Sides Applications: ● Car Stereo ● Car Radio

Integrated Circuit Chroma Demodulator

Integrated Circuit Chroma Demodulator

Integrated Circuit FM Stereo Demodulator

Germanium Transistors

Compact XLR 3 to 5 pole adapters for lighting (DMX) applications

文件：194.8 Kbytes Page：1 Pages