3MTM Double Coated Medical Tape

文件：49.26 Kbytes Page：2 Pages

MECHANICALLY VARIABLE DELAY LINE

文件：172.13 Kbytes Page：2 Pages

Premier Supplier of Electronic Hardware

文件：5.0379 Mbytes Page：60 Pages

包装：散装 描述：CONN BARRIER STRIP 9CIRC 0.375\ 连接器，互连器件 隔板块

封装/外壳：非标准 包装：散装 描述：FIXED IND 1MH 600MA 6 OHM CHASS 电感器，线圈，扼流圈 固定电感器

Passive Delay Lines

Green/Yellow Striped Flame-Retardant Polyolefin Heat Shrink Tubing

Applications Dual colour green and yellow striped polyolefin tubing primarily used to identify “ground” wires. It is flexible and flame-retardant with permanent colour properties, making it easy to install and identify. Used for light duty harnessing and ground wire identification.

Keystone REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Keystone design • variable cable feed 45° from the top or bottom, • plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical dist

E-DAT modul REG unequipped IP20 light gray

Product specification • unequipped termination unit for individual module in Modul design for mounting on TH35 rail to DIN EN 60715 • width of 1HP allows mounting up to 12 REG in standard electrical distribution panels • when mounted as a device of protection class I, the equipotential bonding

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

E-DAT modul REG unequipped IP20 light gray

Product specification • unequipped termination unit for individual module in Modul design for mounting on TH35 rail to DIN EN 60715 • width of 1HP allows mounting up to 12 REG in standard electrical distribution panels • when mounted as a device of protection class I, the equipotential bonding

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

Keystone REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Keystone design • variable cable feed 45° from the top or bottom, • plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical dist

E-DAT modul REG unequipped IP20 light gray

Product specification • unequipped termination unit for individual module in Modul design for mounting on TH35 rail to DIN EN 60715 • width of 1HP allows mounting up to 12 REG in standard electrical distribution panels • when mounted as a device of protection class I, the equipotential bonding

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

Keystone REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Keystone design • variable cable feed 45° from the top or bottom, • plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical dist

OpDAT REGpro housing with splice tray and crimp splice holder

Product specification • splice distributor for TH35 rail without front cover • gray housing • with or without splice tray with crimp splice holder (CSH) for up to 12 splices • installation of two shrink splice holders (SSH)on splice tray is possible • with fiber reservoir • custom-labeled id

OpDAT REGpro housing with splice tray and crimp splice holder

Product specification • splice distributor for TH35 rail without front cover • gray housing • with or without splice tray with crimp splice holder (CSH) for up to 12 splices • installation of two shrink splice holders (SSH)on splice tray is possible • with fiber reservoir • custom-labeled id

OpDAT REG Splice Distributor for shrink splice holder

Product specification • Very compact splice distributor for TH35 rail • Flat design with an inclined outlet (connections facing downward) and a large cabling space • Great ease of use even with high cable channels in the immediate surroundings • To mount pigtails or pre-terminated installation

Green/Yellow Striped Flame-Retardant Polyolefin Heat Shrink Tubing

Applications Dual colour green and yellow striped polyolefin tubing primarily used to identify “ground” wires. It is flexible and flame-retardant with permanent colour properties, making it easy to install and identify. Used for light duty harnessing and ground wire identification.

AT5004 6W

Description 2x 6W LED - 316L Stainless Steel Up/Down Light - SER II

Modul surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 8 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

SmartConnect Patchpanel 12 ports MC module

Product specification • empty module holder for receiving data, KOAX and fiber optic modules • mounting type: module • mounting on standard rail (TH35) or on support frame or mounting plate screwable • consisting of 1 module holder made of bent sheet metal and 2 milled plastic brackets univers

E-DAT modul REG 1 port IP20 light gray

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • compliance with class EA

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

C6Amodul 24 port 180°M 1RU

Product specification • 19 inch 1RU module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA up to 500 MHz

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

Modul surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 2 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 3 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 4 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 6 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

Modul surface mount housing 8 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Modul surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules in modul design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening • e

Keystone surface mount housing 12 port pure white, unequipped

Product specification • surface-mounted, unequipped module housing for individual modules, Keystone design • solid steel sheet housing • upper part of the housing powder-coated in RAL 9010 • upper part of the housing can be put on and removed easily because no screws are used for fastening •

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

Keystone 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Keystone design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded Keystone modules are connec

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

REGplus IP20 C6Amodul 180°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 180° RJ45 individual module • cable feed 45° from the top, plug direction 45° downwards • certified to GHMT Cat.6

C6Amodul 24 port 180°M 1RU

Product specification • 19 inch 1RU module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA up to 500 MHz

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means