Integrated Circuit Module, AF PO, 50W, Dual Power Supply

Features: Small–Sized Package Allows Audio Sets to be made Slimmer Facilitates Thermal Design of Slim Stereo Sets Constant–Current Circuit Minimizes Pop Noise During Power ON/OFF Possible to Design Electronic Supplementary Circuits: Pop Noise Muting During Power ON/OFF

Integrated Circuit Module - AF Power Amp, Single Channel, 100W Min

Features: Built–In Muting Circuit Reduces Pop On Noises

Integrated Circuit Module − AF Power Amp, Single Channel, 120W Min

Features: Built−In Muting Circuit Reduces Pop On Noises

Integrated Circuit Module, Switching Regulator Power Supply

Features: Switching regulator power IC Single–package, selectorless regulated power supply applicable to a wide range of line voltages from 0 to 280VAC The oscillation circuit is of a self–oscillation type.

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features 3 Outputs Output Voltage Select Function

3 Output Positive Voltage Regulator for VCR

3 Outputs\nOutput Voltage Select Function;

3 Output Positive Voltage Regulator for VCR

Features:\n3 Outputs\nOutput Voltage Select Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: 3 Outputs Output Voltage Select Function

Integrated Circuit Module, 2 Output Positive Voltage Regulator for VCR

Features: 2 Outputs Output Voltage Select Function

Integrated Circuit Module, 5 Output Positive Voltage Regulator for VCR

Features: 5 Outputs Output Voltage Select Function

Integrated circuit. Module, 5 output positive voltage regulator for VCR.

Features:\n5 Outputs\nOutput Voltage Select Function

Integrated Circuit Vertical Deflection Output Circuit w/Drive Circuit for CRT Display

Description: The NTE7039 and NTE7104 are vertical deflection output ICs developed for use in high–grade TVs and displays. The interlace and crossover distortion responses, in particular, have been greatly im proved, allowing excellent picture quality on large size television screens and h

Linear Integrated Circuit RF−IF Amplifier

Description: The NTE703A is an RF−IF amplifier constructed on a single silicon chip and i intended for use as a limiting or non−limiting amplifier, harmonic mixer, or oscillator to 150MHz. The low internal feedback of the device insures a higher stability−limited gain than that available from c

Silicon Controlled Rectifiers

Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors . . . PNPN devices designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where reliability of operation is critical. • Small Size • P

Silicon Controlled Rectifiers

Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors . . . PNPN devices designed for high volume, low cost consumer applications such as temperature, light and speed control; process and remote control; and warning systems where reliability of operation is critical. • Small Size • P

4.0 AMPERE DARLINGTON POWER TRANSISTORS COMPLEMENTARY SILICON 40 WATT 50 WATT

. . . designed for general–purpose amplifier and low–speed switching applications. • High DC Current Gain — hFE = 2000 (Typ) @ IC = 2.0 Adc • Monolithic Construction with Built–in Base–Emitter Resistors to Limit Leakage Multiplication • Choice of Packages — MJE700 and MJE800 series

SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR

130.0 Watts Push - Pull Package style AH General Description Silicon VDMOS and LDMOS transistors designed specifically for broadband RF applications. Suitable for Military Radios, Cellular and Paging Amplifier Base Stations, Broadcast FM/AM, MRI, Laser Driver and others.

Semiconductor Laser for LBPLaser Beam Printers

文件：41.54 Kbytes Page：2 Pages