Silicon NPN Transistor High Voltage Power Amp, Switch

Description: The NTE70 is a silicon NPN transistor in a TO63 type case utilizing C2R processing which describes a manufacturing technology that provides surface stabilization for high voltage operation and enhances long term reliability.

Schottky Barrier

Integrated Circuit TV Chroma System

Description: The NTE700 is a monolithic integrated circuit in a 16–Lead DIP type package that performs the functions of subcarrier regeneration, ACC and APC detection, and tint control in color television receivers. It is designed to function compatibly with the NTE743 TV Chroma Amplifier/Demod

Integrated Circuit 5W Audio Amplifier with Muting

Description: The NTE7000 is a monolithic integrated circuit in a 16–Lead DIP type package intended for use as a low frequency power amplifier in a wide range of applications in radio and TV sets. Features: ● Muting Facility ● Protection Against Chip Over Temperature ● Very Low Noise ● High S

Integrated Circuit Horizontal Combination Circuit for Color TV & Computer Monitors

Description: The NTE7001 is a monolithic integrated circuit in a 16–Lead DIP type package intended for use in color television receivers. Features: • Horizontal Oscillation Based on the Threshold Switching Principle • Phase Comparasion Between Sync Pulse and Oscillator Voltage (ϕ1)

Integrated Circuit Switched Mode Power Supply Control

Description: The NTE7002 is a bipolar integrated circuit in a 9–Lead SIP type package that drives, regulates, and monitors the switching transistor in a power supply based on the ringing choke flyback principle. Due to the wide regulating range and the high voltage stability during large loa

Integrated Circuit Electronic Channel Select System Control

Description: The NTE7004 contains CPU/PLL–excluded peripheral circuits such as band switch, +5V power supply (with RST), sync detector, low–pass filter for color TV/VCR frequency synthesizer channel select system use. Functions: • Band Switch (2–Input, 4–Output) • Video Signal, Flyba

Integrated Circuit 2-Phase Stepping Motor Driver

Description: The NTE7005 monolithic power IC is a dual bridge driver in a 16–Lead DIP type package. The maximum driving current and voltage is 330mA x 12V per bridge. Therefore, the best use for this part is in a two–phase bipolar stepping motor driving the head actuator of a 3, to 5.25–inch Fl

Integrated Circuit Switch Mode Driver for DC Motors

Description The NTE7006 is a monolithic LSI circuit in 15–Lead SIP type package with staggered leads. This device is intended for use in a 3–chip DC motor positioning system for applications such as carriage/daisy–wheel position control in typewriters. Features • Driving Capability: 2A,

Integrated Circuit Color TV/Video, Chroma, Deflection Circuit

Description: The NTE7008 is a small–sized multifunctional IC in a 30–Lead DIP type package containing the “video, chroma, deflection” circuit of a NTSC color TV. Besides being small–sized, this device requires fewer adjustments and a reduced number of external components. The NTE7008 can be use

Integrated Circuit Video Signal Processor

Description: The NTE701 is a monolithic integrated circuit TV signal processor in a 16–Lead DIP type package designed for use in color or monochrome receivers. Circuit functions include a horizontal oscillator with AFC, a sync separator, and a key AGC system. The AGC system provides output sign

Integrated Circuit Single Chip NTSC Color TV Processor w/OSD Interface

Description: The NTE7010 combines all the functions required for an NTSC color TV system in a 54–Lead DIP type package. This device includes PIF/SIF circuits, video/chroma/deflection circuits, chroma band pass filters, red and green OSD interfaces, and 1 channel audio video switches. PIF C

Integrated Circuit 20W Audio Power Amplifier Circuit

Description: The NTE7011 is an integrated circuit in a 12−Lead SIP type package designed for use as a BTL power amplifier with built−in headphone amp for portable stereo applications. Typical applications include portable component stereos, car stereo, radio cassette recorders, and TV sound mul

Integrated Circuit Remote Control Preamp with Active ?쏬ow?

Description: The NTE7013 is a bipolar integrated circuit in an 8–Lead DIP type package intended for infrared remote control applications. This device has an active “Low” output polarity and contains a high–gain amplifier, a limiter amplifier, a band–pass filter, a detector, and a pulse shaper.

Integrated Circuit PLL SIF & VIF for TV & VCR

Description: The NTE7015 is a semiconductor integrated circuit consisting of an IF signal processor suitable for color TV sets and VTRs with AV. The circuits include VIF amplifiers, video detector, VCO, APC detector, AFT, video equalizer, IF/RF AGC, SIF detector functions. Features:

Integrated Circuit FM IF System

Description: The NTE7016 is a monolithic integrated circuit that provides all the functions of a comprehensive FM–IF system. This device includes a three–stage FM–IF amplifier/limiter configuration with level detectors for each stage, a doubly–balanced quadrature FM detector, and an audio ampli

Integrated Circuit Small-Signal Subsystem for Color TV

Description: The NTE7018 is a TV subsystem circuit intended to be used for base–band demodulation applications. This circuit consists of all small–signal functions (except the tuner) required for a quality color television receiver. The only additional circuits needed to complete a receiver are

Integrated Circuit Digital Tuning System Interface for TV Systems

Description: The NTE7019 is an integrated circuit in a 16–Lead DIP type package developed to facilitate the Phase Lock Loop (PLL) digital tuning system interface for TV systems. Since all the peripheral blocks are incorporated into this device, the number of peripheral parts can be greatly redu

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs • Output Voltage Select Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs • Output Voltage Select Function

Integrated Circuit Module, 2 Output Positive Voltage Regulator for VCR

Features: • 2 Outputs • Output Voltage Select Function

Integrated Circuit Module, Switching Regulator Power Supply

Features: • Switching regulator power IC • Single–package, selectorless regulated power supply applicable to a wide range of line voltages from 0 to 280VAC • The oscillation circuit is of a self–oscillation type.

Integrated Circuit Module, 2 Output Positive Voltage Regulator for VCR

Features: • 2 Outputs • Output Voltage Select Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs • Cutoff Function

Integrated Circuit Module - AF Power Amp, 2-Channel, 100W Min

Features: • Built–In Muting Circuit Reduces Pop On Noises

Integrated Circuit Module, AF PO, 50W, Dual Power Supply

Features: Small–Sized Package Allows Audio Sets to be made Slimmer Facilitates Thermal Design of Slim Stereo Sets Constant–Current Circuit Minimizes Pop Noise During Power ON/OFF Possible to Design Electronic Supplementary Circuits: Pop Noise Muting During Power ON/OFF

Integrated Circuit Module - AF Power Amp, Single Channel, 100W Min

Features: Built–In Muting Circuit Reduces Pop On Noises

Integrated Circuit Module − AF Power Amp, Single Channel, 120W Min

Features: Built−In Muting Circuit Reduces Pop On Noises

Integrated Circuit Module, Switching Regulator Power Supply

Features: Switching regulator power IC Single–package, selectorless regulated power supply applicable to a wide range of line voltages from 0 to 280VAC The oscillation circuit is of a self–oscillation type.

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features 3 Outputs Output Voltage Select Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: 3 Outputs Output Voltage Select Function

Integrated Circuit Module, 2 Output Positive Voltage Regulator for VCR

Features: 2 Outputs Output Voltage Select Function

Integrated Circuit Module, 5 Output Positive Voltage Regulator for VCR

Features: 5 Outputs Output Voltage Select Function

Integrated Circuit Vertical Deflection Output Circuit w/Drive Circuit for CRT Display

Description: The NTE7039 and NTE7104 are vertical deflection output ICs developed for use in high–grade TVs and displays. The interlace and crossover distortion responses, in particular, have been greatly im proved, allowing excellent picture quality on large size television screens and h

Linear Integrated Circuit RF−IF Amplifier

Description: The NTE703A is an RF−IF amplifier constructed on a single silicon chip and i intended for use as a limiting or non−limiting amplifier, harmonic mixer, or oscillator to 150MHz. The low internal feedback of the device insures a higher stability−limited gain than that available from c

Integrated Circuit Audio Power Amplifier, 20W

Features: • High Output Power: 20W Typ (±B1 = ±22V, RL = 8Ω, f = 20Hz to 20kHz, THD = 1) 18W Typ (±B1 = ±22V, RL = 8Ω, f = 20Hz to 20kHz, THD = 0.5) where: ±B1: Supply Voltage, RL: Load Frequency, f: Frequency, THD: Total Harmonic Distortion, ±B2 = 25V constant • V

Dual, Audio Power Amplifier, 22W BTL

Description: The NTE7041 is an integrated circuit in a 17–Lead SIP type package designed for stereo audio use in car stereo applications. This device has two built–in channels to reduce the characteristic difference between L and R channels. In addition, the NTE7041 contains stand–by and muting

Integrated Circuit Bi-Directional Motor Driver

Description: The NTE7042 is a Bi–Directional Motor Drive in a 9–Lead SIP type package and generates an output current of 700mA (Max) with 4 output modes of forward rotation, reverse rotation, stop (idling), and brake according to input logic (2 inputs). The GNDs of the logic unit and power unit

Integrated Circuit Motor Driver w/4 Modes

Features: • 4 Modes Available: CW, CCW, STOP, and BRAKE • Output Current Up to 1A (Average) and 2A (Peak) • Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V • Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

Integrated Circuit Motor Driver w/4 Modes

Features: • 4 Modes Available: CW, CCW, STOP, and BRAKE • Output Current Up to 1A (Average) and 2A (Peak) • Wide Range of Operating Voltage: VCC opr = 4.5V to 18V VS = 0 to 18V Vref = 0 to 18V • Built–In Thermal Shutdown, Overcurrent Protector, and Punch–Through Curre

Integrated Circuit Switching Regulator Control Circuit

Description: The NTE7044 is an integrated circuit in a 9–Lead SIP type package which contains a PWM switching regulator control circuit and protect circuit on a single chip. Features: • Soft Start Circuit • 0 to 0.7 Duty • Protection Circuit for Overvoltage and Current • Extern

Integrated Circuit Horizontal Signal Processing Circuit for CRT Displays

Features: • Processing for both Negative and Positive Sync. Signal • Wide Horizontal Oscillation Frequency Range: 14kHz to 60kHz • Wide Output Pulse Width Selection: 2µs to 40µs

Integrated Circuit Hybrid Switching Regulator

Integrated Circuit Hybrid Switching Regulator

Integrated Circuit TV Color Small Signal Sub System

Features: • Vision IF Amplifier with Synchronous Demodulator • Automatic Gain Control (AGC) Detector Suitable for Negative Modulation • AGC Tuner • Automatic Frequency Control (AFC) Circuit with Sample–and–Hold • Video Preamplifier • Sound IF Amplifier and Demodulator • DC Vol

Integrated Circuit NTSC Decoder w/Fast RGB Blanking

Description: The NTE7048 is a monolithic integrated decoder for the NTSC color television standard. This device combines all functions required for the identification and demodulation of NTSC signals ina 20–Lead DIP type package. Furthermore, it contains a luminance amplifier, an RGB–matrix and

Integrated Circuit CMOS-Sync Generator for TV & Video Processing Systems

Description: The NTE7049 is a CMOS LSI sync generator in a 24–Lead DIP type package that produces all the timing signals required to drive a fully 2–to–1 interlaced 525–line 30–frame/second, or 625–line 25–frame/second TV camera or video processing system. A complete sync waveform is produced w

Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder

Description: The NTE7050 is a Phase Lock Loop (PLL) stereo decoder with cassette head amplifiers in a 16–Lead DIP type package designed especially for car radios. This device has SDS circuitry where fluctuating signal strength can cause demodulation noise and distortion. The stereo decoder is c

Integrated Circuit 1W BTL Mono Audio Amplifier

Description: The NTE7051 is a mono output amplifier in a 8–Lead DIP style plastic package designed for use in battery–fed portable audio applications, such as tape recorders and radios. This device uses the Bridge–Tied–Load principle (BTL) which can deliver an output power of 1.2W (THD = 10) in

Integrated Circuit Mono BTL Audio Amplifier, 3W

Description: The NTE7052 is a mono output amplifier in a 9–Lead SIP type package designed for use in battery–fed portable radios and mains–fed equipment such as televisions. This device needs no external components because it makes use of the Bridge–Tied–Load (BTL) principle. Consequently it ha

Integrated Circuit 22W Bridge-Stereo Amplifier for Car Radio

Description: The NTE7053 is an audio power amplifier is a 11–Lead Staggered SIP type package designed for car radio applications. Thanks to the fully complementary PNP/NPN output configuration, the high performance of this device is obtained without bootstrap capacitors. A delay turn–on m

Integrated Circuit Single Chip TV Processor

Features: VIF • PLL Type Video Detector for the High Picture & Sound Quality • High Gain VIF Amp (Pre–Amp Unnecessary) • High Speed AGC • Built–In APC Time Constant Switch SIF • Audio IN/OUT at Same Time • Video/Audio Simultaneous Muting, or Audio–Only Muting Possible

Integrated Circuit Dual Audio Power Amplifier, 2W

Description: The NTE7055 is a dual audio power amplifier in a 14−Lead DIP type package designed for portable audio sets. Features:  Wide Operating Voltage Range: VCC= 3V to 16V  High Output Power: PO= 2W at VCC= 12V, RL= 8Ω, THD = 10 PO= 1.6W at VCC= 9V, RL= 4Ω, THD = 10

Integrated Circuit Vertical Deflection Output Circuit for Color TV

Description: The NTE7056 is an integrated circuit in a 9−Lead SIP type package designed for use as a vertical deflection output circuit for 9” to 21” color television sets. This device requires no voltage−boosted pulses and can therefore be connected to a chrominance−video deflection IC such as

Integrated Circuit TV SIF/AFT/RF AGC

Description: The NTE7057 is an integrated circuit in a 12−Lead SIP type package designed for providing a high performance SIF for a TV. This device adopts a quasi−parallel inter−carrier detection system for good sound reproduction. Features: 3−Stage Inter−Carrier Amplifier and Inter−Car

Integrated Circuit Single Chip TV NTSC System

Description: The NTE7058 combines all the functions required for an NTSC color TV system in a 64–Lead DIP type plastic package. This device is designed to offer a wide capability of applications from fundamental CTV to high–end MPX CTV with a quasi–parallel SIF system, requiring minimal externa

Integrated Circuit Dual BTL 14W Audio Power Amplifier

Description: The NTE7059 is an integrated circuit in a 16−Lead Staggered SIP type package designed for a 14W (13.2V, 4Ω) output power amplifier. Stereo operation is enabled due to incorporating two BTL amplifiers. High reliability is obtained due to incorporating protectors. ON/OFF is enabled e

Integrated Circuit NTSC Single Chip Color TV Signal Processor

Description: The NTE7060 is an integrated circuit in a 52–Lead DIP type package that combines all of the signal (VIF, SIF, Video, Color and Synchronous Signal) processing circuits in NTSC color TV onto one chip. Features: • VIF Circuit using PLL Complete Synchronous Detection • Audio

Integrated Circuit Dual 5.3W Audio Power Amplifier Circuit

Description: The NTE7061 is a dual 5.3W (12V, 3Ω) power amplifier in a 12–Lead SIP type package. Dual amplifier circuits make stereo operation possible using one chip. Low quiescent current makes the NTE7061 ideal for use in battery operated applications such as radio cassette recorders. F

Integrated Circuit CRT Display Synchronization Deflection Circuit

Description: The NTE7062 is a sync deflection circuit in a 20–Lead DIP type package. When used in combination with the NTE1773 or the NTE1797 (for vertical output use) this device forms a sync–deflection circuit that meets every requirement for CRT display use. So far, ICs for color TV use h