Integrated Circuit TV Chroma System

Description: The NTE700 is a monolithic integrated circuit in a 16–Lead DIP type package that performs the functions of subcarrier regeneration, ACC and APC detection, and tint control in color television receivers. It is designed to function compatibly with the NTE743 TV Chroma Amplifier/Demod

Integrated Circuit 5W Audio Amplifier with Muting

Description: The NTE7000 is a monolithic integrated circuit in a 16–Lead DIP type package intended for use as a low frequency power amplifier in a wide range of applications in radio and TV sets. Features: ● Muting Facility ● Protection Against Chip Over Temperature ● Very Low Noise ● High S

Integrated Circuit Horizontal Combination Circuit for Color TV & Computer Monitors

Description: The NTE7001 is a monolithic integrated circuit in a 16–Lead DIP type package intended for use in color television receivers. Features: • Horizontal Oscillation Based on the Threshold Switching Principle • Phase Comparasion Between Sync Pulse and Oscillator Voltage (ϕ1)

Integrated Circuit Switched Mode Power Supply Control

Description: The NTE7002 is a bipolar integrated circuit in a 9–Lead SIP type package that drives, regulates, and monitors the switching transistor in a power supply based on the ringing choke flyback principle. Due to the wide regulating range and the high voltage stability during large loa

Integrated Circuit Electronic Channel Select System Control

Description: The NTE7004 contains CPU/PLL–excluded peripheral circuits such as band switch, +5V power supply (with RST), sync detector, low–pass filter for color TV/VCR frequency synthesizer channel select system use. Functions: • Band Switch (2–Input, 4–Output) • Video Signal, Flyba

Integrated Circuit 2-Phase Stepping Motor Driver

Description: The NTE7005 monolithic power IC is a dual bridge driver in a 16–Lead DIP type package. The maximum driving current and voltage is 330mA x 12V per bridge. Therefore, the best use for this part is in a two–phase bipolar stepping motor driving the head actuator of a 3, to 5.25–inch Fl

Integrated Circuit Switch Mode Driver for DC Motors

Description The NTE7006 is a monolithic LSI circuit in 15–Lead SIP type package with staggered leads. This device is intended for use in a 3–chip DC motor positioning system for applications such as carriage/daisy–wheel position control in typewriters. Features • Driving Capability: 2A,

Integrated Circuit Color TV/Video, Chroma, Deflection Circuit

Description: The NTE7008 is a small–sized multifunctional IC in a 30–Lead DIP type package containing the “video, chroma, deflection” circuit of a NTSC color TV. Besides being small–sized, this device requires fewer adjustments and a reduced number of external components. The NTE7008 can be use

RECTIFIERS ASSEMBLIES THREE PHASE BRIDGES, 2.5 AMP, STANDARD AND FAST RECOVERY

Three Phase Bridges, 2.5 Amp, Standard and Fast Recovery FEATURES • Miniature Package • Recovery Time : to 500 ns • Surge Ratings : to 25 A • PIV : from 100 to 600 V • Controlled Avalanche Characteristics • Only Fused-in-Glass Diodes Used

PHENOLIC INSTRUMENT CASES

[KEYSTONE] PHENOLIC INSTRUMENT CASES •Choice of Sizes •Sturdy construction •Flush mounting panels •Cases and panels are sold separately •Covers available in Phenolic or Aluminum •Covers can be machined to accept dials, switches, displays •Panel mounting screws available

Highly compliant

文件：296.43 Kbytes Page：2 Pages

Temperature Sensors Line Guide

文件：736.09 Kbytes Page：11 Pages

PUSHBUTTON SWITCHES - SNAP-ACTING

文件：525.6 Kbytes Page：6 Pages