Integrated Circuit 2-Phase Stepping Motor Driver

Description: The NTE7005 monolithic power IC is a dual bridge driver in a 16–Lead DIP type package. The maximum driving current and voltage is 330mA x 12V per bridge. Therefore, the best use for this part is in a two–phase bipolar stepping motor driving the head actuator of a 3, to 5.25–inch Fl

Integrated Circuit 2–Phase Stepping Motor Driver

Description:\nThe NTE7005 monolithic power IC is a dual bridge driver in a 16–Lead DIP type package. The maximum driving current and voltage is 330mA x 12V per bridge. Therefore, the best use for this part is in a two–phase bipolar stepping motor driving the head actuator of a 3, to 5.25–inch Floppy

ACT7005/7006 Single Package Solution Dual Transceiver, Protocol, Subsystem

General Description The ACT7005/6 Series provides a complete one package interface between the MIL-STD-1553 bus and all microprocessor systems. The hybrid provides all data buffers and control registers to function as a Bus Controller or Remote Terminal. Control of the hybrid by the subsystem i

ACT7005/7006 Single Package Solution Dual Transceiver, Protocol, Subsystem

General Description The ACT7005/6 Series provides a complete one package interface between the MIL-STD-1553 bus and all microprocessor systems. The hybrid provides all data buffers and control registers to function as a Bus Controller or Remote Terminal. Control of the hybrid by the subsystem i

HIGH-SPEED 8K x 8 DUAL-PORT STATIC RAM

DESCRIPTION: The IDT7005 is a high-speed 8K x 8 Dual-Port Static RAM. The IDT7005 is designed to be used as a stand-alone Dual Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 16-bit or wider memory sys

5 WATT UNREGULATED DC/DC CONVERTER

DESCRIPTION The PWR70XX Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 170kHz driven push-pull oscillator is used to ensure stable frequency and non-saturating operation of the input stage. This means there are no high peak voltages