General Purpose

Integrated Circuit TV Fixed Voltage Regulator

Features: Triple Diffused Darlington Transistor Chips Incorporated Compact Plastic Package with Industry Standard Reliability Output Voltage is Pre–Fixed – No External Adjustment is Required

Integrated Circuit TV Fixed Voltage Regulator

Features: Triple Diffused Darlington Transistor Chips Incorporated Compact Plastic Package with Industry Standard Reliability Output Voltage is Pre–Fixed – No External Adjustment is Required

Integrated Circuit Dual dbxII Noise Reduction System

Description: The NTE1744 is an integrated circuit in a 22–Lead DIP type package designed for use in dbxII noise reduction circuits for stereo applications. This device can be used for U.S. sound multiplex TV applications and low voltage operation (1.8V) allows the NTE1744 to be used in battery–

Integrated Circuit High Speed Divider 1/20, 1/100 for VCR

Description: The NTE1745 is a semiconductor integrated circuit in an 8–Lead SIP type package consisting of a built–in 1/20 and 1/100 high–speed frequency divider featuring an ECL circuit configuration. Features: • High–Speed Operation (fmax = 130MHz) • Operation at Low Input Amplitud

Integrated Circuit TV Video Processing Circuit

Description: The NTE1747 is an integrated circuit in a 28–Lead DIP type package designed for color TV video and chrominance signal processing circuit. Features: • Including Video and Chrominance Signal Processing Circuit on a Single Chip, for Compact Set Design • Including Circuit Fo

Integrated Circuit DC Motor Driver

Features: ● Linear or Logic Operation ● Bi−Directional Drive Capability Applications: ● DC Motor for VCR, CD

Integrated Circuit Push-Pull Four Channel Driver

Description: The NTE1749 is a quad push–pull driver capable of delivering output currents to 1A per channel. Each channel is controlled by a TTL–compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four transistors. A separate sup

TV Fixed

TV Fixed

P-channel silicon field-effect transistors

DESCRIPTION Silicon symmetrical p-channel junction FETs in a plastic TO-92 envelope and intended for application with analog switches, choppers, commutators etc. A special feature is the interchangeability of the drain and source connections.

N-CHANNEL MOS BROADBAND RF POWER FET

. . . designed primarily for wideband large–signal output and driver stages up to 200 MHz frequency range. • Guaranteed Performance at 150 MHz, 28 Vdc Output Power = 125 Watts Minimum Gain = 9.0 dB Efficiency = 50 (Min) • Excellent Thermal Stability, Ideally Suited For Class AOperati

P-channel silicon field-effect transistors

DESCRIPTION Silicon symmetrical p-channel junction FETs in plastic microminiature SOT23 envelopes.They are intended for application with analogue switches, choppers, commutators etc. using SMD technology. A special feature is the interchangeability of the drain and source connections.

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

L-BAND PA DRIVER AMPLIFIER

DESCRIPTION The µPG174TA is L-Band PA driver amplifier developed for digital cellular telephone and PCS applications. This device feature high output power and low distortion with 2.8 V low voltage and 35 mA low current operation. It is housed in a very small 6-pin minimold package available on t