Silicon NPN Transistor Low Voltage Output Amp

Features: ● Low Collector–Emitter Saturation Voltage ● High DC Current Gain ● An M Type Mold package that Allows Downsizing of Equipment and Automatic Insertion by Taping and Magazine Packaging

Silicon Power Transistor Audio Power Amp, Medium Speed Switch

Description: The NTE130 (NPN) and NTE219 (PNP) are silicon complementary transistors in a TO3 type case designed for general purpose switching and amplifier applications. Features: • DC Current Gain: hFE = 20 – 70 @ IC = 4A • Collector–Emitter Saturation Voltage: VCE(sat) = 1.1V (Max

Integrated Circuit TV Remote Control

Description: The NTE1300 is a silicon monolithic integrated circuit in an 8–Lead SIP type package designed for use as a Frequency Servo Control System for tape recorders and VCRs. Functions: • Wave Shaping Circuit • Sawtooth Wave Generator • Comparator • DC Amplifier • Regul

Integrated Circuit AM/FM IF

Description: The NTE1301 is a silicon monolithic integrated circuit in a 7–Lead SIP type package designed for the AM/FM IF amplifier of a radio receiver. Two differential amplifiers and an AGC circuit perform good limiting quality for FM operation and good AGC characteristics for AM operation.

Germanium Complementary Transistors Audio Power Amplifier

Description: The NTE131 (PNP) and NTE155 (NPN) are Germanium PNP Alloy Junction transistors in a Japanese TO66 type package designed for use in audio power amplifier applications.

Integrated Circuit Vertical OSC, Amp

Description: The NTE1312 is a silicon monolithic integrated circuit in a 14–Lead DIP type package designed for use in TV vertical oscillator, sync circuits. It includes a vertical oscillator, vertical trigger and comparator amplifier.

Integrated Circuit Module − 2 Power, 2 Channel AF Power Amplifier, 35W Min

Integrated Circuit Module − 2 Power, 2 Channel AF Power Amplifier, 35W Min

Integrated Circuit Module, Dual, AF PO, 50W

Features: ● Muting Circuit ● Reduced Heat Sink due to Case Temperature Dissipation up to +125°C

Integrated Circuit Module, 2 Power, 2 Channel, AF Power Amplifier, 50W Min.

Features: ● Muting Circuit ● Reduced Heat Sink due to Case Temperature Dissipation up to +125°C

Silicon N-Channel JFET Transistor VHF Amplifier, Mixer

Silicon N–Channel JFET Transistor VHF Amplifier, Mixer

Integrated Circuit Module, Hybrid, Audio Power Amp, 25W, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Audio Power Amp, 25W, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Audio Power Amp, 15 Watt

Integrated Circuit Module, Hybrid, Audio Power Amp, 15 Watt

Integrated Circuit Module − Hybrid, Audio Power Amp50W 2 Power Supplies Required

Integrated Circuit Module − Hybrid, Audio Power Amp50W 2 Power Supplies Required Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50V Collector Current, ICmax . . . . . . . . . . .

Integrated Circuit Module − Hybrid, Audio Power Amp 20 Watt, 2 Power Supplies Required

Features: ● Minimum Output Power − 20W ● Dual Channel − Single Power Supply ● Thick Film Hybrid ● Small Shock Noise

N.Channel JFET Silicon Transistor General Purpose AF Amplifier

N–Channel JFET Silicon Transistor General Purpose AF Amplifier

Integrated Circuit Module - Hybrid, Dual, Audio Power Amplifier, 15W/Ch, 2 Power Supplies Required

Integrated Circuit Module – Hybrid, Dual, Audio Power Amplifier, 15W/Ch, 2 Power Supplies Required

Integrated Circuit Module - Dual, Audio Power Amplifier, 25W/Channel, 2 Power Supplies Required

Integrated Circuit Module – Dual, Audio Power Amplifier, 25W/Channel, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Audio Power Amp, 40W, 2 Power Supplies Req?셝

Integrated Circuit Module, Hybrid, Audio Power Amp, 40W, 2 Power Supplies Req’d

Integrated Circuit Module − Hybrid, Audio Power Amp 70 Watt, 2 Power Supplies Required

Features: • Minimum Output Power − 70W • Dual Power Supply − Single Channel • Thick Film Hybrid • Load Shorting Protector

Integrated Circuit Module, Hybrid, Dual Driver for 40W to 50W Audio Power Amp

Integrated Circuit Module, Hybrid, Dual Driver for 40W to 50W Audio Power Amp

Integrated Circuit Module, Hybrid, Dual Driver for 80W to 90W Audio Power Amp

Features: • Current Mirror Circuit Providing Low Distortion • 2 Channel Package • Dual Power Supply Operation • Small Sized Package

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Module, Hybrid, Audio Power Amplifier, 24W 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Audio Power Amplifier, 24W 2 Power Supplies Required Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±35V Operating Case Temperatu

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 10W/Ch

Applications: • Designed for Outdoor Stereo and Radio Cassette Tape Recorder Use.

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 30W/Ch, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 30W/Ch, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 20W/Ch, 2 Power Supplies Required

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 20W/Ch, 2 Power Supplies Required

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Germanium Complementary Transistors Audio Power Amplifier

Description: The NTE131 (PNP) and NTE155 (NPN) are Germanium PNP Alloy Junction transistors in a Japanese TO66 type package designed for use in audio power amplifier applications.

Integrated Circuit Module, AF PO, 50W, Dual Power Supply

Integrated Circuit Module, AF PO, 50W, Dual Power Supply

Integrated Circuit Module, Hybrid, Dual Audio Power Amp, 22W/Ch

Applications: • Designed for Outdoor Stereo and Radio Cassette Tape Recorder Use.

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Power Amp, 5.5W

Features: • Low Number of External Components (4) • Power Output: 5.5W Typ. • Voltage Gain: 54dB Typ.

Integrated Circuit Audio Power Amp, 4.2W

Features: • Automatic Operating Point Stabilizer • Low Noise • Variable Frequency Characteristics

Integrated Circuit Audio Power Amplifier, 5W

Description: The NTE1365 is an integrated circuit in a 9–Lead SIP type package designed for low power amplifier applications such as portable radios, radio cassette tape recorders, and car radios. Features: • High Gain, Low Distortion, Low Noise • Few External Components • Built–I

Integrated Circuit Dual, Audio Power Amp, 2.3W to 5W (4.6W to 15W BTL)

Description: The NTE1367 is an integrated circuit in an 18–Lead DIP type package designed for use in audio output applications with low noise, low distortion and high output widely ranging for power supply and load resistance. Two amps are built in allowing for dual or BTL operation. Featu

Integrated Circuit Dual Audio Power Amplifier, 5.8W/Channel

Description: The NTE1368 is an integrated circuit in a 12–Lead SIP type package designed for dual, low–frequency, high power amplifier applications. This device requires few external components, thus enabling high density mounting. Design for heat radiation is easy due to low thermal resistance

Integrated Circuit Audio Power Amplifier, 5.5W

Integrated Circuit Audio Power Amplifier, 5.5W

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Power Amplifier, 5.8W, for Car Radio

Features: • Output Power: POUT = 5.8W (Typ) at VCC = 13.2V, RL = 4Ω, THD = 10 POUT = 9.2W (Typ) at VCC = 13.2V, RL = 2Ω, THD = 10 • Maximum Output Power: POM = 9.5W (Typ) at VCC = 13.2V, RL = 4Ω • Low Distortion: THD = 0.15 at POUT = 1W, GV = 55dB THD = 0.07

Integrated Circuit Dual, Audio Power Amp, 5.3W/Ch

Features: • Built−in Protector Circuits (for surge and thermal, etc.) • Built−in Automatic Operating Point Stabilized Circuit • Low Distortion, Low L/F Noise • Small Transient Nosie at Power ON/OFF Switching • Good Channel Separation • Few External Components

Integrated Circuit Dual Audio Power Amplifier Circuit, 7.5W

Description: The NTE1373 is an integrated circuit designed for use as a 7.5W (16W, 4Ω) power amplifier output with low noise and low distortion suitable for TV sets with multi−sound. Stereo operation is possible due to incorporating two amplifiers on one 12−Lead SIP type chip. Features:

Integrated Circuit Audio Power Amplifier, 22W

Description: The NTE1376 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 22W output power (THD = 0.5) at VS = 32V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

Integrated Circuit AF Power Amplifier, 6W/Channel

Features: • Built–In 2 Channels (Dual) Enabling use in Stereo and Bridge Amplifier Applications Dual: 6W x 2 Typ Bridge: 19W Typ • Minimum Number of External Parts Required • Low Pop Noise during Power Supply ON/OFF and Good Starting Balance • Good Ripple Rejection: 46dB Ty

Integrated Circuit Audio Power Amplifier, 10W

Description: The NTE1378 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 12W output power (THD = 10) at VS = ±12V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Power Amplifier, 14W

Description: The NTE1380 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 14W output power (THD = 0.5) at VS = ±14V/4Ω. This device provides high output current and has very low harmonic and cross–over dist

Integrated Circuit Audio Power Amp, 2.1W

Features: • High Power Output at Low Voltage: PO = 2.1W Typ (9V, 4Ω) • Low Quiescent Current

Integrated Circuit Dual Audio Power Amp, 5.1W/Ch (10.5W BTL)

Description: The NTE1383 is an integrated circuit in an 18–Lead DIP designed for use as an audio output with low noise, low distortion, and high output for a wide range of power supply voltages and load resistance. Two built–in amplifiers provide dual or BTL operation. Typical applications incl

Integrated Circuit Dual, Audio Power Amplifier, 2.4W/Ch

Features: • Output Power: POUT = 2.4W/Ch (Typ) at VCC = 14V, RL = 8Ω, THD = 10 • Wide Operating Supply Voltage Range: VCC = 5.5V to 20V • Very Few External Components Required • Built–In Turn–On “POP” Noise Muting Circuit • Excellent Crosstalk: CT = –60dB (Typ)

Integrated Circuit Audio Power Amplifier, 5.8W, for Car Radio, Car Stereo

Features: • High Gain (52dB. Typ) and High Output (5.8W Typ) • Soft Clip • Few External Components • Built–In Thermal Cutoff Circuit Protects Against Load Short, Overload • Built–In Pop Noise Prevention Circuit Protects Against Power Supply ON Noise • May Be Used for Bridge Ampli

Integrated Circuit Dual, Audio Power Amplifier, 20W

Description: the NTE1389 is an audio power amplifier in a 12–Lead SIP type package specifically designed for car stereo applications. Typically, it provides 23W output power at 14.4V and 20W at 13.2V on a 4 Ohm load. This device can be used without capacitors because it incorporates the orig

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: • High Gain: 51dB Typ., HIgh Power Output: 12W Typ. • Low Number of External Components Required • Low Noise During Power ON/OFF Operation • Soft Tonal Quality in Saturated Power Output • Low Distortion Over Low to High Audio Frequency Range • Low Residual Noise: Rg = 0

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: • High Gain: 51dB Typ., HIgh Power Output: 12W Typ. • Low Number of External Components Required • Low Noise During Power ON/OFF Operation • Soft Tonal Quality in Saturated Power Output • Low Distortion Over Low to High Audio Frequency Range • Low Residual Noise: Rg = 0

Integrated Circuit Audio Power Amp, 7W

Description: The NTE1392 and NTE1393 are class B power amplifiers in a 10–Lead SIP type package designed especially for home tpe stereo amplifiers. These devices provide an output power of 5W at 19V, and also 7W at 22V to an 8Ω load with 10 distortion. Features: • Available in Two Diffe