15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • Halogen free available upon request by adding suffix -HF • Mounting Hole For #8 Screw • Plastic Case With Metal Bottom • Any Mounting Position • Surge Rating Of 300 Amps • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/Rohs Compliant

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Amperes FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw * Case: Epoxy case with Heat Sink internally Mounted in the Bridge encapsulation

整流桥

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes)

文件：28.54 Kbytes Page：2 Pages

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

文件：244.14 Kbytes Page：3 Pages

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • Halogen free available upon request by adding suffix -HF • Mounting Hole For #8 Screw • Plastic Case With Metal Bottom • Any Mounting Position • Surge Rating Of 300 Amps • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • Lead Free Finish/Rohs Compliant

BRIDGE RECTIFIERS 10 Amps

BRIDGE RECTIFIERS 10 Amps

SILICON BRIDGE RECTIFIERS

VOLTAGE RANGE: 50 --- 1000 V CURRENT: 15.0 A FEATURES ◇ Rating to 1000V PRV ◇ Surge overload rating to 300 Amperes peak ◇ Ideal for printed circuit board ◇ Reliable low cost construction utilizing molded plastic technique results in inexpensive product ◇ Lead solderable per MIL-STD-202 m

SILICON BRIDGE RECTIFIERS

VOLTAGE RANGE: 50 --- 1000 V CURRENT: 15.0 A FEATURES ◇ Rating to 1000V PRV ◇ Surge overload rating to 300 Amperes peak ◇ Ideal for printed circuit board ◇ Reliable low cost construction utilizing molded plastic technique results in inexpensive product ◇ Lead solderable per MIL-STD-202 m

Bridge Rectifier

15.0A Plastic Passivated Single-Phase Bridge Rectifiers-50-1000V Features • Recommended for non-automatic applications. • Ideal for & save space on printed circuit board. • Applicable for automatic insertion. • Reliable low cost construction utilizing molded plastic technology results

15A BRIDGE RECTIFIER

Features ● Diffused Junction ● High Current Capability ● High Case Dielectric Strength ● High Surge Current Capability ● Ideal for Printed Circuit Board Application ● Plastic Material has Underwriters Laboratory Flammability Classification 94V-O

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Amperes FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw * Case: Epoxy case with Heat Sink internally Mounted in the Bridge encapsulation

15A SINGLE PHASE BRIDGE RECTIFIER

Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705

15A GLASS PASSIVATED SINGLE PHASE BRIDGE RECTIFIER

Glass Passivated Die Construction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705

HIGH CURRENT 15 AMPS SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS

BRIDGE RECTIFIERS 10 Amps

BRIDGE RECTIFIERS 10 Amps

BRIDGE RECTIFIERS 10 Amps

BRIDGE RECTIFIERS 10 Amps

SILICON BRIDGE RECTIFIERS

VOLTAGE RANGE: 50 --- 1000 V CURRENT: 15.0 A FEATURES ◇ Rating to 1000V PRV ◇ Surge overload rating to 300 Amperes peak ◇ Ideal for printed circuit board ◇ Reliable low cost construction utilizing molded plastic technique results in inexpensive product ◇ Lead solderable per MIL-STD-202 m

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • UL Recognized File # E165989 • Mounting Hole For #8 Screw, Plastic Case with Metal Bottom • Surge Rating Of 300 Amps • Case to Terminal Isolation Voltage 2500V • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensit

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

Fixed Frequency WLED Driver Evaluation Board

GENERAL DESCRIPTION The EV1518DG-00A is an evaluation board for the MP1518, a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

Fixed Frequency White LED Driver

General Description The EV0056 evaluation board is designed for backlights using white LEDs. It implements MPS’ MP1518 fixed frequency step-up converter. Features ◾ On Board Power MOSFET ◾ Drives up to 6 Series White LEDs ◾ Up to 86 Efficiency ◾ Over 1MHz Fixed Switching Frequency ◾ Open Lo

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver

DESCRIPTION The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor

1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver

DESCRIPTION The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor

1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver Evaluation Board

GENERAL DESCRIPTION The EV0042 is an evaluation board for the MP1519, a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • UL Recognized File # E165989 • Mounting Hole For #8 Screw, Plastic Case with Metal Bottom • Surge Rating Of 300 Amps • Case to Terminal Isolation Voltage 2500V • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensit

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw

15A SINGLE-PHASE BRIDGE RECTIFIER

文件：70.5 Kbytes Page：4 Pages

Silicon Bridge Rectifiers

文件：398.31 Kbytes Page：3 Pages

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

文件：39.83 Kbytes Page：2 Pages

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

文件：244.14 Kbytes Page：3 Pages

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes)

文件：28.54 Kbytes Page：2 Pages

普通整流桥

二极管 / 桥式整流器

SINGLE-PHASE 15 AMPS. SILICON BRIDGE RECTIFIERS

文件：123.39 Kbytes Page：2 Pages

3A, 25V, 1.1MHz Step-Up Converter

文件：188.82 Kbytes Page：5 Pages

3.3V, 1A Sepic Evaluation Board

文件：180.37 Kbytes Page：4 Pages

封装/外壳：16-VQFN 裸露焊盘 功能：升压，升压/降压 包装：卷带（TR） 描述：IC REG MULTI CONFG ADJ 3A 16QFN 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：16-VQFN 裸露焊盘 功能：升压，升压/降压 包装：管件 描述：IC REG MULTI CONFG ADJ 3A 16QFN 集成电路（IC） DC DC 开关稳压器

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver Evaluation Board

文件：179.23 Kbytes Page：3 Pages

SHIELDED SMT POWER INDUCTORS

● FEATURE Various high power inductor are Superior to be high saturation for surface mounting ● APPLICATIONS 2 DC/DC converter power supply, Telecommunication equipment

RENESAS MCU

文件：829.49 Kbytes Page：121 Pages

Silicon Controlled Rectifier

文件：179.34 Kbytes Page：3 Pages

INTERCONNECT BATTERY HOLDERS

文件：355.08 Kbytes Page：1 Pages

Easy Identification and Tracing with 10-color Cable

文件：578.7 Kbytes Page：1 Pages