3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

3A, 25V, 1.1MHz 升压变换器

MP1517是一款3A固定频率升压变换器，非常适合中高电流升压、反激和SEPIC应用。1.1MHz的高开关频率允许其使用较小的外部组件，从而为空间受限的摄像头、PDA和手机等应用提供了紧凑的解决方案。MP1517具有0.7V低反馈电压，为白光LED驱动器应用（如手机摄像头闪光灯）提供了更高的效率。MP1517可将输出电压调节至最高25V，效率高达95％。MP1517还提供多种保护功能，包括内部软启动、逐周期限流保护和输入欠压锁定保护，在上电和输出短路条件下可防止敏感外部电路承受过大应力，甚至损坏。MP1517 采用电流控制调节和外部补偿组件，可实现宽输入电压范围、宽输出电压和负载电流条件下控制 • 峰值电流限值：4A\n• 700mV低反馈电压阈值\n• 150mΩ内部功率 MOSFET\n• 输入电压范围：2.6V 至 25V\n• 效率高达95%\n• 零电流关断模式\n• 欠压锁定保护\n• 过载保护（OLP）\n• 软启动功能\n• 过温关断保护\n• 采用16引脚4mm x 4mm QFN 封装;

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

3A, 25V, 1.1MHz Step-Up Converter

文件：188.82 Kbytes Page：5 Pages

3.3V, 1A Sepic Evaluation Board

文件：180.37 Kbytes Page：4 Pages

封装/外壳：16-VQFN 裸露焊盘 功能：升压，升压/降压 包装：卷带（TR） 描述：IC REG MULTI CONFG ADJ 3A 16QFN 集成电路（IC） 稳压器 - DC-DC 开关稳压器

封装/外壳：16-VQFN 裸露焊盘 功能：升压，升压/降压 包装：管件 描述：IC REG MULTI CONFG ADJ 3A 16QFN 集成电路（IC） DC DC 开关稳压器

2 x 6 W stereo power amplifier

GENERAL DESCRIPTION The TDA1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin (SIL9MPF), a plastic rectangular-bent single in-line medium power package with fin (RBS9MPF) or a plastic heat-dissipating dual in-line package (HDIP18). The

8 W BTL or 2 x 4 W SE power amplifier

GENERAL DESCRIPTION The TDA1517ATW is an integrated class-AB output amplifier contained in a plastic heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for multimedia applications. FEATURES • Requires very few external components • Flexibility in

8 W BTL or 2 x 4 W SE power amplifier

GENERAL DESCRIPTION The TDA1517ATW is an integrated class-AB output amplifier contained in a plastic heatsink thin shrink small outline package (HTSSOP20). The device is primarily developed for multimedia applications. FEATURES • Requires very few external components • Flexibility in

2 x 6 W stereo power amplifier

GENERAL DESCRIPTION The TDA1517 is an integrated class-B dual output amplifier in a plastic single in-line medium power package with fin (SIL9MPF), a plastic rectangular-bent single in-line medium power package with fin (RBS9MPF) or a plastic heat-dissipating dual in-line package (HDIP18). The

6-W STEREO AUDIO POWER AMPLIFIER

文件：352.86 Kbytes Page：20 Pages