1.0 Ampere Schottky Power Rectifiers

Features • Compact surface mount package with J-bend leads. • 1.5 Watt Power Dissipation package. • 1.0 Ampere, forward voltage less than 395 mv.

2A Synchronous Step Down DC/DC Converter

„ FEATURES z 2A Output Current z Wide 4.5V to 27V Operating Input Range z Integrated 120mΩ Power MOSFET Switches z Output Adjustable from 0.925V to 24V z Up to 96% Efficiency z Programmable Soft-Start z Stable with Low ESR Ceramic Output Capacitors z Fixed 400KHz Frequency z Cycle-by-

Schottky Power Rectifier(Surface Mount Power Package)

. . . Employs the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity prot

3A, 23V, 340KHz Synchronous Rectified Step-Down Converter

DESCRIPTION The MP1570 is a monolithic synchronous buck regulator. The device integrates 100mΩ MOSFETS that provide 3A continuous load current over a wide operating input voltage of 4.75V to 23V. Current mode control provides fast transient response and cycle-by-cycle current limit. FEATURES •

3A, 23V, 340KHz Synchronous Rectified Step-Down Converter

DESCRIPTION The MP2307 is a monolithic synchronous buck regulator. The device integrates 100mΩ MOSFETS that provide 3A of continuous load current over a wide operating input voltage of 4.75V to 23V. Current mode control provides fast transient response and cycle-by-cycle current limit. An

SCHOTTK Y BARRIER DIODE

Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction,majority carrier conduction Low power loss,high efficiency High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds,0.375”(9.5mm) lead l

SURFACE MOUNT SCHOTTKY BA R RIER RECTIFIER

Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Metal silicon junction,majority carrier conduction Low power loss,high efficiency Built-in strain relief,ideal for automated placement High forward surge current c

1.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

文件：77.54 Kbytes Page：2 Pages

封装/外壳：DO-214AA，SMB 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：DIODE SCHOTTKY 30V 1A SMB 分立半导体产品 二极管 - 整流器 - 单

肖特基功率整流器，表面贴装，1.0 A，30 V

Low Voltage Buck Regulators

文件：283.6 Kbytes Page：20 Pages

2A 18V Synchronous PFM/PWM Step-Down Regulator

文件：737.15 Kbytes Page：12 Pages

3A 18V Synchronous PFM/PWM Step-Down Regulator

文件：784.98 Kbytes Page：12 Pages

3A 18V Synchronous Step-Down Converter

文件：759.19 Kbytes Page：12 Pages

Schottky Rectifier

文件：36.48 Kbytes Page：3 Pages

1.5 A, 170 kHz, Buck Regulator with Synchronization Capability

文件：152.38 Kbytes Page：13 Pages

1.5 A, 340 kHz, Buck Regulator with Synchronization Capability

文件：157.49 Kbytes Page：13 Pages

1.0 Ampere Schottky Power Rectifiers

Features • Compact surface mount package with J-bend leads. • 1.5 Watt Power Dissipation package. • 1.0 Ampere, forward voltage less than 395 mv.

SCHOTTKY RECTIFIER

IF(AV) = 1.0 Amp VR = 30V Description The MBRS130LTR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives,switching power supplies, converters, free-wheeling diodes,battery char

Schottky Power Rectifier(Surface Mount Power Package)

. . . Employs the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity prot

Schottky Power Rectifier

Schottky Power Rectifier Surface Mount Power Package This device employs the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage,

Schottky Power Rectifier Surface Mount Power Package

This device employs the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and pol

Schottky Power Rectifier Surface Mount Power Package

This device employs the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and pol

SCHOTTKY RECTIFIER

IF(AV) = 1.0 Amp VR = 30V Description The MBRS130LTR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives,switching power supplies, converters, free-wheeling diodes,battery char

Schottky Rectifier, 1.0 A

FEATURES • Small foot print, surface mountable • Very low forward voltage drop • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Designed and qualified for industrial level

1 Amp Schottky Rectifier

1 Amp Schottky Rectifier • Underwriters Laboratory Flammability Class 94V-0 • Schottky Barrier Rectifier • Guard ring protection • Low forward voltage • Low thermal resistance rating

Surface Mount Schottky Power Rectifier

Surface Mount Schottky Power Rectifier This device employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency re

Surface Mount Schottky Power Rectifier

This device employs the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and pol

Surface Mount Schottky Power Rectifier

Surface Mount Schottky Power Rectifier This device employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency re

Surface Mount hottky Power Rectifier

Surface Mount Schottky Power Rectifier This device employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency re

Surface Mount Schottky Power Rectifier

This device employs the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and pol

SCHOTTKY RECTIFIER

Description/ Features The MBRS130TR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse

SCHOTTKY RECTIFIER

Description/ Features The MBRS130TRPbF surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reve

Schottky Rectifier

文件：36.48 Kbytes Page：3 Pages

Low power loss,high efficiency

文件：502.79 Kbytes Page：2 Pages

Schottky Barrier Rectifiers

Schottky Power Rectifier

文件：95.76 Kbytes Page：6 Pages

Schottky Power Rectifier

文件：139.38 Kbytes Page：6 Pages

Schottky Power Rectifier

文件：95.76 Kbytes Page：6 Pages

Schottky Power Rectifier

文件：139.38 Kbytes Page：6 Pages

Schottky Power Rectifier

文件：139.38 Kbytes Page：6 Pages

Schottky Power Rectifier

文件：95.76 Kbytes Page：6 Pages

肖特基功率整流器，表面贴装，1.0 A，30 V

封装/外壳：DO-214AA，SMB 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：DIODE SCHOTTKY 30V 2A SMB 分立半导体产品 二极管 - 整流器 - 单

SCHOTTKY RECTIFIER 1 Amp

文件：111.89 Kbytes Page：6 Pages

Schottky Rectifier, 1.0 A

文件：105.4 Kbytes Page：6 Pages

Schottky Rectifier, 1.0 A

文件：105.4 Kbytes Page：6 Pages

Schottky Rectifier, 1.0 A

文件：105.28 Kbytes Page：6 Pages

Schottky Rectifier, 1.0 A

文件：93.4 Kbytes Page：5 Pages

Schottky Rectifier, 1.0 A

文件：105.28 Kbytes Page：6 Pages

1.3 Watts Axial Leaded Zener Diodes

VOLTAGE RANGE: 2.4 - 200V POWER: 1.3Wa t t s Features ● Complete Voltage Range 2.4 to 200 Volts ● High peak reverse power dissipation ● High reliability ● Low leakage current

GAMMA SEALS

DESCRIPTION The BECA 130 profile is a gamma seal. Sealing happens when the axial force of the lip comes into contact with the housing. The metal part protects the rubber axial lip from external pollution. APPLICATIONS Axles Machine tools Electric motors Pumps Transmissions

Screw connection

The plug connector 130-A series was developed according to “White Goods Standard RAST 5 (Plug-Connection-Technology with a pitch of 5 mm). Due to its diverse coding possibilities, it offers maximum safety against incorrect plugging. For the coded version, a corresponding drawing or description

THREADED INSERT, BLIND, REGULAR HEAD STYLE LIGHT DUTY

文件：120.98 Kbytes Page：1 Pages

THREE PHASE BRIDGE

文件：94.82 Kbytes Page：7 Pages