null8-bit Withstand Voltage Microcontroller

文件：178.64 Kbytes Page：25 Pages

CMOS IC FROM 66K byte, RAM 2048 byte on-chip 8-bit 1-chip Microcontroller

文件：176.13 Kbytes Page：25 Pages

null8-bit Withstand Voltage Microcontroller

SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 20 to 45 VOLTS

Switchmode Power Rectifiers . . . using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • Guardring for Stress Protection • Low Forward Voltage • 150°C Operating Junction Temperature • Guaranteed Reverse Avalanche • Ep

SWITCHMODE??Schottky Rectifier D2PAK Power Surface Mount Package

SWITCHMODE Schottky Power Rectifier DPAK Power Surface Mount Package . . . employing the Schottky Barrier principle in a large area metal–to–silicon power diode. State of the art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low vol

MICROWAVE POWER TRANSISTOR

The RF Line Microwave Pulse Power Transistor Designed for 1025–1150 MHz pulse common base amplifier applications such as TCAS, TACAN and Mode–S transmitters. • Guaranteed Performance @ 1090 MHz Output Power = 350 Watts Peak Gain = 8.5 dB Min, 9.0 dB (Typ) • 100 Tested for Load Mismatch

MICROWAVE POWER TRANSISTORS

The RF Line Microwave Pulse Power Transistor Designed for Class B and C common base amplifier applications in short and long pulse TACAN, IFF, DME, and radar transmitters. • Guaranteed Performance @ 1090 MHz, 50 Vdc Output Power = 35 Watts Peak Minimum Gain = 10 dB • 100 Tested for Loa

SCHOTTKY BARRIER RECTIFIERS(10A,30-45V)

SWITCHMODE POWER RECTIFIERS D PAK SURFACE MOUNT POWER PACKAGE The D PAK Power rectifier employs the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art devices have the following features: * Low Forward Voltage * Low Switching noise * High Surge Capacity * Guara