Clock Recovery and Data Retiming Phase-Locked Loop

PRODUCT DESCRIPTION The AD800 and AD802 employ a second order phase-locked loop architecture to perform clock recovery and data retiming on Non-Return to Zero, NRZ, data. This architecture is capable of supporting data rates between 20 Mbps and 160 Mbps. The products described here have been defi

155 Mbps Clock and Data Recovery IC

Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface

GENERAL DESCRIPTION The AD5429/AD5439/AD54491 are CMOS 8-, 10-, and 12-bit dual-channel current output digital-to-analog converters, respectively. These devices operate from a 2.5 V to 5.5 V power supply, making them suited to battery-powered and other applications. FEATURES 10 MHz mult

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

12-/14-Bit High Bandwidth Multiplying DACs with Serial Interface

GENERAL DESCRIPTION The AD5444/AD54461 are CMOS 12-bit and 14-bit, current output, digital-to-analog converters (DACs). Operating from a single 2.5 V to 5.5 V power supply, these devices are suited for battery-powered and other applications. FEATURES 12 MHz multiplying bandwidth INL of ±

16-Bit, 250 kSPS PulSAR ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7685 is a 16-bit, charge redistribution successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V to 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversi

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN)

GENERAL DESCRIPTION The AD7986 is an 18-bit, 2 MSPS successive approximation, analog-to-digital converter (ADC). It contains a low power, high speed, 18-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interfac

Dual, Current-Output, Serial-Input, 16-/14-Bit DACs

PRODUCT OVERVIEW The AD5545/AD5555 are 16-bit/14-bit, current-output, digital=to-analog converters designed to operate from a 4.5 V to 5.5 V supply range. FEATURES 16-bit resolution AD5545 14-bit resolution AD5555 ±1 LSB DNL monotonic ±1 LSB INL 2 mA full-scale current ±

Clock Recovery and Data Retiming Phase-Locked Loop

PRODUCT DESCRIPTION The AD800 and AD802 employ a second order phase-locked loop architecture to perform clock recovery and data retiming on Non-Return to Zero, NRZ, data. This architecture is capable of supporting data rates between 20 Mbps and 160 Mbps. The products described here have been defi

Clock Recovery and Data Retiming Phase-Locked Loop

PRODUCT DESCRIPTION The AD800 and AD802 employ a second order phase-locked loop architecture to perform clock recovery and data retiming on Non-Return to Zero, NRZ, data. This architecture is capable of supporting data rates between 20 Mbps and 160 Mbps. The products described here have been defi

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

Low Noise, High Speed Amplifier for 16-Bit Systems

GENERAL DESCRIPTION The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/√Hz typical and 2.1 pA/√Hz typical) while operating at the lowest qu

16-Bit, 250 kSPS PulSAR ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7685 is a 16-bit, charge redistribution successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V to 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversi

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN)

GENERAL DESCRIPTION The AD7986 is an 18-bit, 2 MSPS successive approximation, analog-to-digital converter (ADC). It contains a low power, high speed, 18-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interfac

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

High Current Output, Triple Video Amplifier

PRODUCT DESCRIPTION The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 1

Quad 350 MHz 24 V Amplifier

PRODUCT DESCRIPTION The AD8024 is a low settling time, high-speed, high output voltage quad current feedback operational amplifier. Manufactured on ADI’s proprietary XFHV high-speed bipolar process, the AD8024 is capable of driving to within 1.3 V of its 24 V supply rail. Each amplifier has high-

Quad 350 MHz 24 V Amplifier

PRODUCT DESCRIPTION The AD8024 is a low settling time, high-speed, high output voltage quad current feedback operational amplifier. Manufactured on ADI’s proprietary XFHV high-speed bipolar process, the AD8024 is capable of driving to within 1.3 V of its 24 V supply rail. Each amplifier has high-

Universal AC input

Special Features • CE Mark EMC & LVD • Universal AC input • Fully regulated output • Overcurrent, Overvoltage and Thermal protection • Constant voltage • High efficiency • High MTBF • IEC320 AC receptacle, 3 pin (type C14) • Built in EMI filter • (CISPR 22 Class B) • AC In

Quad High Speed Amplifier

PRODUCT DESCRIPTION The AD8026 is a complete low cost, closed loop, voltage feedback, quad amplifier. Precision trimmed resistors set a fixed RF/RG ratio of 5/3 to a typical gain accuracy of 0.02. Manufactured on ADI’s proprietary XFCB high speed bipolar process, which enables the output drivers

Quad High Speed Amplifier

PRODUCT DESCRIPTION The AD8026 is a complete low cost, closed loop, voltage feedback, quad amplifier. Precision trimmed resistors set a fixed RF/RG ratio of 5/3 to a typical gain accuracy of 0.02. Manufactured on ADI’s proprietary XFCB high speed bipolar process, which enables the output drivers

Quad High Speed Amplifier

PRODUCT DESCRIPTION The AD8026 is a complete low cost, closed loop, voltage feedback, quad amplifier. Precision trimmed resistors set a fixed RF/RG ratio of 5/3 to a typical gain accuracy of 0.02. Manufactured on ADI’s proprietary XFCB high speed bipolar process, which enables the output drivers

Quad High Speed Amplifier

PRODUCT DESCRIPTION The AD8026 is a complete low cost, closed loop, voltage feedback, quad amplifier. Precision trimmed resistors set a fixed RF/RG ratio of 5/3 to a typical gain accuracy of 0.02. Manufactured on ADI’s proprietary XFCB high speed bipolar process, which enables the output drivers

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ► High speed ► 190 MHz, −3 dB bandwidth (G = +1) ► 100 V/μs slew rate ► Low distortion ► 120 dBc at 1 MHz SFDR ► 80 dBc at 5 MHz SFDR ► Selectable input crossover threshold ► Low noise ► 4.3 nV/√Hz ► 1.6 pA/√Hz ► Low offset voltage: 900 μV maximum ► Low power: 6.5 mA per ampli

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ► High speed ► 190 MHz, −3 dB bandwidth (G = +1) ► 100 V/μs slew rate ► Low distortion ► 120 dBc at 1 MHz SFDR ► 80 dBc at 5 MHz SFDR ► Selectable input crossover threshold ► Low noise ► 4.3 nV/√Hz ► 1.6 pA/√Hz ► Low offset voltage: 900 μV maximum ► Low power: 6.5 mA per ampli