Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

16-Bit, 250 kSPS PulSAR ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7685 is a 16-bit, charge redistribution successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V to 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversi

18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN)

GENERAL DESCRIPTION The AD7986 is an 18-bit, 2 MSPS successive approximation, analog-to-digital converter (ADC). It contains a low power, high speed, 18-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interfac

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

高速、低噪声双通道运算放大器

AD8022内置两个低噪声、高速、电压反馈型放大器，每个放大器的静态电流仅4.0 mA，而且电压噪声仅为2.5 nV/√Hz。这两个放大器提供宽带宽、低失真性能，当驱动容性负载时具有稳定的高输出电流。AD8022采用ADI公司的高电压XFCB双极性工艺制造，可以在较宽的电源电压范围内工作。它提供8引脚MSOP和8引脚SOIC两种封装。AD8022具有快速过压恢复和宽带宽特性，非常适合用作ADSL、VDSL或专有xDSL收发器设计中的接收通道前端。\n\n 在xDSL线路接口电路中，AD8022的运算放大器可以配置为线路变压器中的差分接收器，或配置为独立的有源滤波器。 • 低功耗放大器提供低噪声和低失真特性，非常适用于xDSL调制解调器接收器\n\n• 宽电源电压范围：+5 V、±2.5 V至±12 V\n\n• 低功耗\n每个放大器4.0 mA\n\n• 电压反馈\n易于使用\n总噪声较低(与电流反馈型放大器相比，输入电流噪声微不足道)\n\n• 低噪声、低失真\n电压噪声：2.5 nV/√Hz (100 kHz)\n电流噪声：1.2 pA/√Hz\nMTPR <-66 dBc (G = +7)\nSFDR = 110 dB (200 kHz)\n\n• 高速\n–3 dB带宽：130 MHz (G = +1)，\n0.1%建立时间：68 ns \;

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High-Speed Low-Noise Op Amps

GENERAL DESCRIPTIONS The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current opti

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

FEATURES Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compare

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：527.27 Kbytes Page：17 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

包装：盒 描述：BOARD EVALUATION FOR AD8022AR 开发板，套件，编程器 评估板 - 运算放大器

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

包装：盒 描述：BOARD EVALUATION FOR AD8022ARM 开发板，套件，编程器 评估板 - 运算放大器

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

ADSP-BF506F EZ-KIT Lite짰 Evaluation System Manual

文件：1.16895 Mbytes Page：75 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

Dual High Speed, Low Noise Op Amp

文件：370.71 Kbytes Page：16 Pages

AC-DC switching power supply control IC

■ Overview The AN8022L and AN8022SB are ICs which are suitable for controlling a switching power supply using primary side control method. Those are most suited for a switching power supply of relatively small capacity. Less frequently used functions are removed, and only the necessary minim

AC-DC switching power supply control IC

■ Overview The AN8022L and AN8022SB are ICs which are suitable for controlling a switching power supply using primary side control method. Those are most suited for a switching power supply of relatively small capacity. Less frequently used functions are removed, and only the necessary minim

Separate Excitation Switching Type

文件：59.74 Kbytes Page：5 Pages