Low Voltage EPD TVS Diode For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 400 Watts peak puls

Ultralow Capacitance TVS Diodes Array for ESD Protection

FEATURES: * 400 W Peak Pulse Power per Line (tp=8/20 uS) * One Device Protects one Unidirectional Line. * Low Capacitance. * Low Leakage Current. * Low operating and Clamping Voltages. * Transient Protection for High Speed Data Lines.to * IEC61000-4-2(ESD) ±15kV(air), ±8kV(Contact) * IEC61

2.8Volts ESD Protection Devices

Features • For Sensitive ESD Protection • Low Leakage • Low Clamping Voltage • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free Available Upon Request By Adding Suffix -HF • Lead Free Finish/RoHS Compliant (P Suffix Designates RoHS Compliant. See O

2.8V TVS Array For ESD and Latch-Up Protection

Description The SLVU2.8 is designed to protect low voltage, CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Low capacitance compensation diode is integrated into the TVS to lower the typical cap

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

LOW VOLTAGE DIODE FOR ESD AND LATCH-UP PROTECTION

DESCRIPTION The UTC SLVU2.8 is a low voltage diode, it uses UTC’s advanced technology to provide customers with low leakage current, low capacitance, low operating and clamping voltage, etc. The UTC SLVU2.8 is suitable for switching systems, laser diode protection and WAN/LAN Equipment, etc. FE

Low Capacitance

General Description The Utralow Capacitance Transient Voltage Suppressors are designed to low votage, integrated circuits from transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), tertiary lightning and other induced voltages. Features ● 400 W Peak Pulse Power p

The SLVU2.8 series was designed to protect low voltage, CMOS devices from ESD and lightning induced transients.

Description The SLVU2.8 series was designed to protect low voltage, CMOS devices from ESD and lightning induced transients. There is a compensating diode in parallel with the low voltage TVS to protect one unidirectional line or a high speed data pair when two devices are paired together. These r

Transient Voltage Suppressors for ESD Protection

Feature 600 Watts Peak Pulse Power per Line (tp=8/20μs) Protects one I/O lines Low clamping voltage Low leakage current IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) IEC61000-4-5 (Lightning) 30A (8/20μs) Applications 10/100 Ethernet WAN/LAN Equipment

600 WATT ULTRA LOW CAPACITANCE TVS ARRAY

文件：960.89 Kbytes Page：9 Pages

Transient Voltage Suppressors Array for ESD Protection

文件：299.7 Kbytes Page：3 Pages

用于千兆以太网保护的低压单元

Transient Voltage Suppressors Array for ESD Protection

文件：143.12 Kbytes Page：3 Pages

USB 2.0 power and data line

文件：132.3 Kbytes Page：3 Pages

Low Voltage EPD TVS Diode For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 400 Watts peak puls

Low Voltage EPD TVS Diode For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 400 Watts peak puls

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. The devices are constructed usi

ULTRA LOW CAPACITANCE TVS ARRAY

FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT

Transient Voltage Suppressors Array for ESD Protection

Description The SLVU2.8-4 is in an SO-08 package and may be used to protect two high-speed line pairs. The “flow-thru” design minimizes trace inductance and reduces voltage overshoot associated with ESD events. The low clamping voltage of the SLVU2.8-4 minimizes the stress on the protected IC. F

Low Capacitance TVS Diode Array

FEATURES ◆ 400 Watts Peak Pulse Power per Line (tp=8/20µs) ◆ Protects two line pairs (four lines) ◆ Low capacitance ◆ RoHS Compliant APPLICATIONS ◆ 10/100/1000 Ethernet ◆ WAN/LAN Equipment ◆ Test & Measurement Equipment ◆ Switching Systems ◆ Instrumentation ◆ Audio/Video Inputs

USB 2.0 power and data line

Features ● Ultra low leakage: nA level ● Operating voltage: 2.8V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 2

Transient Voltage Suppressors Array for ESD Protection

Description The SLVU2.8-4 is in an SO-08 package and may be used to protect two high-speed line pairs. The “flow-thru” design minimizes trace inductance and reduces voltage overshoot associated with ESD events. The low clamping voltage of the SLVU2.8-4 minimizes the stress on the protected IC. F

Low capacitance

General Description The SLVU2.8-4 is in an SOP-8 package and may be used to protect two high-speed line pairs.The “flow-thru”design minimizes trace inductance and reduces voltage overshoot associated with ESD events. The low clamping voltage of the SLVU2.8-4 minimizes the stress on the protected

The SLVU2.8-4 was designed to protect low voltage, CMOS devices from ESD and lightning induced transients.

Description The SLVU2.8-4 was designed to protect low voltage, CMOS devices from ESD and lightning induced transients. There is a compensating diode in series with each low voltage TVS to present a low loading capacitance to the line being protected. These robust structures can safely absorb repe

TVS Array For ESD and Latch Up Protection

Features ● 100W peak pulse power(8/20μs) ● Protects two line pairs(four lines) ● Ultra low leakage: nA level ● Low operating voltage: 2.8V ●Low capacitance ● Ultra low clamping voltage ● JEDEC SO-8 package ● Complies with following standards: - IEC 61000-4-2 (ESD) immunity test Air dis

4 Lines, Uni-directional, low Capacitance Transient Voltage Suppressors

Descriptions The SLVU2.8-4 is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high speed data interfaces. It has been specifically designed to protect sensitive electronic components which are connected to data and transmission lines from over-stress caused by Elect

Transient Voltage Suppressors for ESD Protection

Feature 630 Watts Peak Pulse Power per Line (tp=8/20μs) Protects two line pairs (four lines) Low capacitance RoHS Compliant IEC61000-4-2(ESD) ±30kV (air),±30kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) IEC61000-4-5 (LIGHTING) 30A (8/20μs) Applications 10/100 Ethernet WAN/LAN Equipment

4-Line TVS Diode Array

Features • For surface mounted applications • Low-profile package suited for automotic installed • Transient protection for data lines • Compliance with IEC 61000-4-2(ESD) immunity test Air Discharge: ±20kV Contact Discharge: ±20kV Main Applications Use in sensitive electronics protectio

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. The devices are constructed usi

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. The devices are constructed usi

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. The devices are constructed usi

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. The devices are constructed usi

2.8V TVS Array For ESD and Latch-Up Protection

flow through design makes the SLVU2.8-4.TBT contact discharge. The SLVU2.8-4.TBT is assembled SLVU2.8-4 The SLVU2.8-4.TBT Description is designed to protect low voltage,CMOS semiconductors from transients caused by electrostatic discharge(ESD),cable discharge events(CDE), lightning and oth

TVS Array For ESD and Latch Up Protection

Features ● 100W peak pulse power(8/20μs) ● Protects two line pairs(four lines) ● Ultra low leakage: nA level ● Low operating voltage: 2.8V ●Low capacitance ● Ultra low clamping voltage ● JEDEC SO-8 package ● Complies with following standards: - IEC 61000-4-2 (ESD) immunity test Air dis

ULTRA LOW CAPACITANCE TVS ARRAY

FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

TVS Array For ESD and Latch Up Protection

Features 4 300W peak pulse power(8/20ps) ® Protects two line pairs(four lines) 4 Ultra low leakage: nA level # Low operating voltage: 2.8V ® Low capacitance # Ultra low clamping voltage 4 JEDEC SO-8 package 4 Complies with following standards: ~ IEC 61000-4-2 (ESD) immunity test Air disc

TVS Array For ESD and Latch Up Protection

Features # 300W peak pulse power(8/20p1s) Protects two line pairs(four lines) # Ultra low leakage: nA level # Low operating voltage: 2.8V ® Low capacitance 4 Ultra low clamping voltage # JEDEC SO-8 package # Complies with following standards: ~ IEC 61000-4-2 (ESD) immunity test Air d

Lightning Surge Protection - SLVU2.8-4BTG-S

Description The SLVU2.8-4BTG-S was designed to protect low voltage, CMOS devices from ESD and lightning induced transients. There is a compensating diode in series with each low voltage TVS to present a low loading capacitance to the line being protected. These robust structures can safely a

600 WATT MULTI-LINE ult ra LOW CAPACITANCE TVS ARR AY

Description The SLVU2.8-4LC is an ultra low capacitance TVS array that provides two line pairs of protection. This device protects high-frequency applications such as voice, video and data related systems and is designed to minimize the effects of high overshoot voltage experienced during and E

ULTRA LOW CAPACITANCE TVS ARRAY

FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT

Transient Voltage Suppressors for ESD Protection

Feature Moisture Sensitivity Level (MSL -1) AEC-Q101 qualified 400 Watts Peak Pulse Power per Line (tp=8/20μs) Protects two lines pairs (four lines) Low capacitance RoHS compliant IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) IEC61000-4-5 (Lightning) 30A (

ULTRA LOW CAPACITANCE TVS ARRAY

FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT

ULTRA LOW CAPACITANCE TVS ARRAY

FEATURES ✔ 600 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Provides Protection For Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW LEAKAGE CURRENT

ULTRA LOW CAPACITANCE TVS ARRAY

DESCRIPTION The SLVU2.8-8 is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such as voice, video and data related systems and is designed to minimize the effects of high overshoot voltage experienced during and ESD

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 600 Watts peak puls

Low capacitance

General Description The SLVU2.8-8 is in an SOP-8 package and may be used to protect four high-speed line pairs.The “flow-thru”design minimizes trace inductance and reduces voltage overshoot associated with ESD events. The low clamping voltage of the SLVU2.8-8 minimizes the stress on the protected

Transient Voltage Suppressors for ESD Protection

Feature 630 Watts Peak Pulse Power per Line (tp=8/20μs) Protects eight lines (four line Pairs) Low capacitance RoHS Compliant IEC61000-4-2(ESD) ±30kV (air),±30kV (contact) IEC61000-4-4 (EFT) 40A (5/50ηs) IEC61000-4-5 (LIGHTING) 30A (8/20μs) Applications 10/100/1000 Ethernet WAN/LAN Equ

Lightning Surge Protection- SLVU2.8-8 Series

Description The SLVU2.8-8 was designed to protect low voltage, CMOS devices from ESD and lightning induced transients. There is a compensating diode in series with each low voltage TVS to present a low loading capacitance to the line being protected. These robust structures can safely absorb

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 600 Watts peak puls

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 600 Watts peak puls

EPD TVS Diode Array For ESD and Latch-Up Protection

Description The SLV series of transient voltage suppressors are designed to protect low voltage, state-of-the-art CMOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge events (CDE), lightning and other induced voltage surges. Features ◆ 600 Watts peak puls

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

Low voltage unit for Gigabit Ethernet protection

Description The SLVU2.8 series has been designed to protect Ethernet line. Its low capacitance makes it compatible with Gigabit Ethernet. Features ■ Peak pulse current : IPP = 30 A 8/20 µs ■ Low capacitance : Ctyp = 1.5 pF ■ Stand-off voltage : VR = 2.8 V ■ Low leakage current : IRmax = 0.2

Lightning Surge Protection- SLVU2.8-8 Series

Description The SLVU2.8-8 was designed to protect low voltage, CMOS devices from ESD and lightning induced transients. There is a compensating diode in series with each low voltage TVS to present a low loading capacitance to the line being protected. These robust structures can safely absorb

EPD TVS Array For ESD and Latch Up Protection

Features # 400W peak pulse power(8/20s) # Protects four line pairs(eight lines) # High peak pulse current! # Comprehensive pin out for easy board layout # Low capacitance # Low leakage current # Low operating and clamping voltages + Complies with following standards: ~ IEC 61000-4-2 (ESD)

500 WATT ULTRA LOW CAPACITANCE TVS ARRAY

DEScRiPTion The SLVU2.8-8G is an ultra low capacitance TVS array, designed to protect four line pairs from the effects of Electrostatic Discharge (ESD), Electrical Fast Transients (EFT) and switching transients. The SLVU2.8-8G exceeds Level 4 IEC 61000-4-2, with a peak pulse power rating of 500 W

ULTRA LOW CAPACITANCE TVS ARRAY

DESCRIPTION The SLVU2.8-8 is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such as voice, video and data related systems and is designed to minimize the effects of high overshoot voltage experienced during and ESD