500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

Silicon Avalanche Diodes - 500 Watt Axial Leaded Transient Voltage Suppressors

Description The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01 • VBR @ TJ= VBR@25°C

500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 180 Volts 500 Watts Peak Power 3.0 Watts Steady State FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Low zener impedance * Typical IR less than 1 A above 10Vz * High t

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE POWER 5.0 to 220 Volts 500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 500W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time:

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180.0 Volts 500 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated junction • 500W Peak Pulse Power capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge re

Transient Voltage Suppressors

Peak Pulse Power 500W Stand Off Voltage 5.0 to 180V Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fast response time ◆ 500W peak pulse power s

500W TRANSIENT VOLTAGE SUPPRESSOR

500W TRANSIENT VOLTAGE SUPPRESSOR Features ! Glass Passivated Die Construction ! 500W Peak Pulse Power Dissipation ! 180V – 220V Standoff Voltage ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

Axial Lead Transient Voltage Suppressors (TVS)

Description The SA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clam

FEATURES Voltage Suppressor Diodes

FEATURES Excellent clamping capability Low dynamic impedance Solder dip 275 °C max. 7 s, per JESD 22-B106

5.0 To 190V 500W Axial Lead Transient Voltage Suppressors (TVS)

Features Glass passivated chip junction in DO-15 Package Low leakage Uni and Bidirectional unit Excellent clamping capability 500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01 Fast response time: typically less than 1.0ps from 0 Volts to VBR min Typical I

Transient Voltage Suppressors (TVS)

Features ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response time ■ Typical IR less than 1μA above 10V ■ High Temperature soldering guaranteed: 265℃/10

Transient Voltage Suppressors

FEATURES ◇ Plastic Sackage. ◇ Glass passivated chip junction. ◇ 500W Peak Pulse Power capability on 10/1000µs waveform. ◇ Excellent clamping capability. ◇ Repetition rate (duty cycle): 0.01. ◇ Low incremental surge resistance. ◇ Fast response time: typically less than 1.0ps from 0 volt to B

500W 180V TVS transient suppressor diode

文件：573.51 Kbytes Page：5 Pages

AXIAL LEADED TRANSIENT VOLTAGE SUPPRESSOR

文件：573.807 Kbytes Page：5 Pages

TVS Diode Products

文件：3.3173 Mbytes Page：146 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Glass Passivated Junction Transient Voltage Suppressor Stand-Off Voltage - 5.0 to 180 Volts 500 Watt Peak Pulse Power

文件：323.93 Kbytes Page：6 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER

文件：103.92 Kbytes Page：4 Pages

Transient Voltage Suppression Diodes

文件：142.44 Kbytes Page：5 Pages

500W Glass Passivated Junction Transient Voltage Suppressor

文件：270.38 Kbytes Page：6 Pages

封装/外壳：DO-204AC，DO-15，轴向 包装：卷带（TR） 描述：TVS DIODE 180VWM 289VC DO204AC 电路保护 TVS - 二极管

常规瞬态电压抑制二极管

SA Transient Voltage Suppressor Diode Series

文件：843.02 Kbytes Page：5 Pages

Transient Voltage Suppressors Diodes

文件：689.56 Kbytes Page：5 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 180 Volts

文件：918.5 Kbytes Page：3 Pages

Transient Voltage Suppressor Diodes

文件：191.44 Kbytes Page：5 Pages

Transient Voltage Suppressors

文件：848.1 Kbytes Page：7 Pages

Axial Lead Transient Voltage Suppressors

文件：646.25 Kbytes Page：6 Pages

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watts

文件：131.64 Kbytes Page：6 Pages

Low zener impedance

文件：216.05 Kbytes Page：5 Pages

500W TRANSIENT VOLTAGE SUPPRESSOR

500W TRANSIENT VOLTAGE SUPPRESSOR Features ! Glass Passivated Die Construction ! 500W Peak Pulse Power Dissipation ! 180V – 220V Standoff Voltage ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has

500W TRANSIENT VOLTAGE SUPPRESSOR

500W TRANSIENT VOLTAGE SUPPRESSOR Features ! Glass Passivated Die Construction ! 500W Peak Pulse Power Dissipation ! 180V – 220V Standoff Voltage ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has

Axial Lead Transient Voltage Suppressor

文件：145.16 Kbytes Page：7 Pages

Transient Voltage Suppression Diodes

文件：142.44 Kbytes Page：5 Pages

Axial Lead Transient Voltage Suppressor

文件：381.76 Kbytes Page：6 Pages

Axial Lead Transient Voltage Suppressor

文件：381.76 Kbytes Page：6 Pages

TVS Axial Lead

TVS (3167)

POWER INDUCTOR

●FEATURE 1. Excellent solder heat resistance(add “C” is for high current type) 2. Low voltage drops and small variations inductance ●APPLICATION 1. DC power supply circuits 2. Power line choke coils…etc

WIRE WOUND SMD INDUCTOR

●FEATURE 1. Low core loss for high frequency power application 2. Large terminal surface ●APPLICATION 1. Portable communication equipment, notebook computer

1.3 Watts Axial Leaded Zener Diodes

VOLTAGE RANGE: 2.4 - 200V POWER: 1.3Wa t t s Features ● Complete Voltage Range 2.4 to 200 Volts ● High peak reverse power dissipation ● High reliability ● Low leakage current

SHIELDED SMT POWER INDUCTORS

● FEATURE Various high power inductor are Superior to be high saturation for surface mounting ● APPLICATIONS 2 DC/DC converter power supply, Telecommunication equipment

THREADED INSERT, THRU, REGULAR HEAD STYLE

文件：20.42 Kbytes Page：1 Pages