丝印代码：S108；0.4-2.7 GHz SP9T Antenna Switch Module

Applications • Dual-mode handsets (GSM/EDGE, Quad/TD-SCDMA or WCDMA dual mode) • Low-cost, small footprint FEMs Features • Supports quad-band GSM and TD-SCDMA or GSM and WCDMA dual-mode for 2G and 3G systems • Three TD/WCDMA ports are designed for 3G high power transmit/receive operation •

丝印代码：S108；SINGLE 2-INPUT POSITIVE-AND GATE

Features » Operate from 1.65V to 5.5V « Low Power Current: lcc=10pA (Max.) +24mA Output Drive (VCC=3.0V) Power Down Protection » ESD Protection Exceeds JESD 22 -2000-V Human-Body Model (A114-A) -200-V Machine Model (A115-A) -1000-V Charged-Device Model (C101)

Zero-Volt Cross Switching

Features  Zero-Volt Cross Switching  High Blocking Voltage (700V MIN)  High Transient Immunity  0.8A Maximum Continuous Current  Low Input Control Current  Long Life / High Reliability  RoHS / Pb-Free / REACH Compliant Applications  Valve Control  Solenoid Control  Home Appl

包装：盒 描述：PLIER LONG NOSE SMOOTH 工具 钳子

CATV/MATV/Satellite Splitter (Indoor)

Zero-Volt Cross Switching

文件：247.84 Kbytes Page：8 Pages

CCD signal processing module

Signal processing module for CCD area image sensor (S10810, S10811)The C9266-03/-04 are signal processing circuit designed for HAMAMATSU CCD area image sensors S10810, S10811. The C9266-03/-04 can be used in X-ray applications such as X-ray imaging and non-destructive inspection when combined with t ► Built-in 12-bit AD converter\n► Signal frequency: 1 MHz\n► Adjustable offset\n► Adjustable gain\n► Interface of computer: USB 2.0\n► Power supply: USB bus power or DC +5 V (C9266-03)\n                       USB bus power (C9266-04)Applications\n► Control of X-ray CCD area image sensor\n   (S10810,;

CCD signal processing module

Signal processing module for CCD area image sensor (S10810, S10811) The C9266-03/-04 are signal processing circuit designed for HAMAMATSU CCD area image sensors S10810, S10811. The C9266-03/-04 can be used in X-ray applications such as X-ray imaging and non-destructive inspection when combine

CCD signal processing module

Signal processing module for CCD area image sensor (S10810, S10811) The C9266-03/-04 are signal processing circuit designed for HAMAMATSU CCD area image sensors S10810, S10811. The C9266-03/-04 can be used in X-ray applications such as X-ray imaging and non-destructive inspection when combine

Si photodiode

Si photodiode Ceramic package photodiode with low dark current S1087/S1133 series are ceramic package photodiodes that offer low dark current. Ceramic package used is light-impervious, so no stray light can reach the active area from the side or backside. This allows reliable optical measurement

Si photodiode

Si photodiode Ceramic package photodiode with low dark current S1087/S1133 series are ceramic package photodiodes that offer low dark current. Ceramic package used is light-impervious, so no stray light can reach the active area from the side or backside. This allows reliable optical measurement

Low Profile Type Solid State Relays

■ Features 1. Low profile type (height : 16mm) 2. Built-in zero-cross circuit (S108T02/S208T02) 3. RMS ON-state current IT : MAX. 8Arms 4. Approved by TÜV, No. R9750791 (S208TY1/S208TY2) Input-Output : Basic Insulation ■ Applications 1. Programmable controllers 2. Air conditioners 3. C

Low Profile Type Solid State Relays

■ Features 1. Low profile type (height : 16mm) 2. Built-in zero-cross circuit (S108T02/S208T02) 3. RMS ON-state current IT : MAX. 8Arms 4. Approved by TÜV, No. R9750791 (S208TY1/S208TY2) Input-Output : Basic Insulation ■ Applications 1. Programmable controllers 2. Air conditioners 3. C

Zero-Volt Cross Switching

Features • Zero-Volt Cross Switching • Input Series Limiting Resistor (300Ω TYP) • High Blocking Voltage (700V MIN) • High Transient Immunity • 0.8A Maximum Continuous Current • Low Input Control Current • Long Life / High Reliability • RoHS / Pb-Free / REACH Compliant Applications • V

包装：散装 描述：ADHESIVES \u0026 SEALANTS 胶带，粘合剂，材料 胶，粘合剂，敷料器

Front-illuminated FFT-CCD for X-ray imaging

Front-illuminated FFT-CCD for X-ray imaging

文件：361.8 Kbytes Page：10 Pages

Front-illuminated FFT-CCD for X-ray imaging

文件：361.8 Kbytes Page：10 Pages

CCD area image sensors

文件：462.87 Kbytes Page：10 Pages

CMOS area image sensors for X-ray imaging

文件：653.36 Kbytes Page：9 Pages

CMOS area image sensors for X-ray imaging

文件：651.43 Kbytes Page：9 Pages

Si photodiodes

文件：194.15 Kbytes Page：5 Pages

Zero-Volt Cross Switching

文件：440.59 Kbytes Page：8 Pages

200 VOLTS N-CHANNEL TMOS POWER FET LOGIC LEVEL

Logic Level TMOS N–Channel Enhancement Mode This TMOS FET is designed for high voltage, high speed switching applications such as line drivers, relay drivers, CMOS logic, microprocessor or TTL to high voltage interface and high voltage display drivers. • Low Drive Requirement, VGS = 3

HIGH EFFICIENCY RECTIFIERS(1.0A,600-1000V)

Switchmode Power Rectifiers . . . Designed for use in switching power supplies. These state-of-the-art devices have the fllowing features: * High Surge Capacity * Low Power Loss, High efficiency. * Glass Passivated chip junctions * 150°C Operating Junction Temperature * Low Stored Charge

Operational Amplifiers

文件：158.28 Kbytes Page：8 Pages

Operational Amplifiers

文件：158.28 Kbytes Page：8 Pages

Operational Amplifiers

文件：158.28 Kbytes Page：8 Pages