PROGRAMMABLE ATTENUATOR

Product Description The RF2420 is a multistage monolithic programmable attenuator. The device is built using an advanced Gallium Arsenide process technology and has an attenuation programmability over a 44dB range in 2dB steps. The attenuation is set by five bits of digital data. The input and ou

PROGRAMMABLE ATTENUATOR

Product Description The RF2420 is a multistage monolithic programmable attenuator. The device is built using an advanced Gallium Arsenide process technology and has an attenuation programmability over a 44dB range in 2dB steps. The attenuation is set by five bits of digital data. The input and ou

10dB SWITCHED ATTENUATOR

Product Description The RF2421 is a monolithic switched attenuator. The device is built using a Gallium Arsenide process technology and has a single step attenuation of 10dB. The input and output of the device has a low VSWR 50Ω match. The RF output can drive up to +16dBm. This unit is intended f

10dB SWITCHED ATTENUATOR

Product Description The RF2421 is a monolithic switched attenuator. The device is built using a Gallium Arsenide process technology and has a single step attenuation of 10dB. The input and output of the device has a low VSWR 50Ω match. The RF output can drive up to +16dBm. This unit is intended f

2.5GHZ DIRECT QUADRATURE MODULATOR

Product Description The RF2422 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for high frequency AM, PM, or compound carriers. This low-cost IC implements differential amplifiers for the modulation inputs, 90° carrier phase shift network, carrier limitin

2.5GHZ DIRECT QUADRATURE MODULATOR

Product Description The RF2422 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for high frequency AM, PM, or compound carriers. This low-cost IC implements differential amplifiers for the modulation inputs, 90° carrier phase shift network, carrier limitin

100mW SPREAD-SPECTRUM TRANSMITTER IC

Product Description The RF2423 is a monolithic integrated transmitter IC capable of universal direct modulation for UHF AM, PM, or compound carriers. The transmitter may be used stand-alone for applications requiring not more than 100mW output power, or may be used to drive a final power amp

UHF QUADRATURE MODULATOR

Product Description The RF2424 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for high frequency AM, PM, or compound carriers. Maximum output power is +7.5dBm, which is achieved with low input I and Q signal levels. This low-cost IC implements differenti

4-PORT TRANSFER SWITCH

Product Description The RF2425 is a very low-cost single-throw, double-pole GaAs MESFET switch. There are two bidirectional input/output channels which can be turned off or on by a single logic control line. Two of the ports may be tied together externally to make a transmit/receive switch. The d

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：89.26 Kbytes Page：6 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：150.69 Kbytes Page：9 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：186.74 Kbytes Page：10 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：89.26 Kbytes Page：6 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：186.74 Kbytes Page：10 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：150.69 Kbytes Page：9 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：89.26 Kbytes Page：6 Pages

2.5GHZ DIRECT QUADRATURE MODULATOR

文件：186.74 Kbytes Page：10 Pages

100mW SPREAD-SPECTRUM TRANSMITTER IC

UHF QUADRATURE MODULATOR

Hazardous Area Fuses

Barrier Network Fuse 242 Series • Meets Barrier Network Standards (EN50020) for hazardous applications. • High interrupting rating. Meets the 1500A minimum. • Available in both axial lead and surface mount. Safe-T-Plus Fuse 259 Series • Designed to allow equipment to meet “Intrinsically Safe”

Plastic Replaceable Tip Tweezers

Description: Type 242CP Plastic replaceable tip tweezers are suitable to applications which require holding a small component firmly. The Carbon Fiber reinforced ESD PEEK Plastic provides the tweezers with ESD and non-scratching properties combined with excellent high temperature resistance. Ti

Carbon Composition Molded OD/OF Series (5 Tol.) OA Series (10)

文件：124.92 Kbytes Page：1 Pages

Interactive Catalog Replaces Catalog Pages

文件：348.38 Kbytes Page：5 Pages

Class H/K, J and R ferrule and blade fuse reducers

文件：547.66 Kbytes Page：2 Pages