Fast CMOS Latched Transceivers

Product Description Pericom Semiconductor’s PI74FCT series of logic circuits are produced using the Company’s advanced 0.8 micron CMOS technology, achieving industry leading speed grades. All PI74FCT2XXX devices have a built-in 25 ohm series resistor on all outputs to reduce noise because of refl

Octal Registered Transceiver

Features NSC 74FCT543A is pin and functionally equivslent to IDT 74FCT543A Speed controls for data flow in each direction Back t back latched transcever Input clamp diodes to fimtt bus reflections TTL/CMOS input and output level compatible IoL = 64 mA CMOS power levels 4 KV minimum ESD im

FAST CMOS OCTAL LATCHED TRANSCEIVER

FEATURES: • A and C grades • Low input and output leakage ≤1μA (max.) • CMOS power levels • True TTL input and output compatibility: – VOH = 3.3V (typ.) – VOL = 0.3V (typ.) • High Drive outputs (-15mA IOH, 64mA IOL) • Meets or exceeds JEDEC standard 18 specifications • Power off disable o

FAST CMOS OCTAL LATCHED TRANSCEIVER

DESCRIPTION: The FCT543T/FCT2543T is a non-inverting octal transceiver built using an advanced dual metal CMOS technology. This device contains two sets of eight D-type latches with separate input and output controls for each set. For data flow from A to B, for example, the A-to-B Enable (CEAB)

FAST CMOS OCTAL LATCHED TRANSCEIVER

FEATURES: • A and C grades • Low input and output leakage ≤1μA (max.) • CMOS power levels • True TTL input and output compatibility: – VOH = 3.3V (typ.) – VOL = 0.3V (typ.) • High Drive outputs (-15mA IOH, 64mA IOL) • Meets or exceeds JEDEC standard 18 specifications • Power off disable o

FAST CMOS OCTAL LATCHED TRANSCEIVER

DESCRIPTION: The FCT543T/FCT2543T is a non-inverting octal transceiver built using an advanced dual metal CMOS technology. This device contains two sets of eight D-type latches with separate input and output controls for each set. For data flow from A to B, for example, the A-to-B Enable (CEAB)