HIGH RELIABILITY PHOTOLOGIC HERMETIC SENSORS

Features: ● Four output options ● High noise immunity ● Direct TTL/LSTTL interface ● TO-18 hermetic package ● Mechanically and spectrally matched to the OP130 series devices ● Two sensitivity options ● Data rate 200 kBaud

PHOTOLOGIC HERMETIC SENSORS

Features: ● Four output options ● High noise immunity ● Direct TTL/LSTTL interface ● TO-18 hermetic package ● Mechanically and spectrally matched to the OP130 series devices ● Two sensitivity options ● Data rate 200 kBaud

Photologic Hermetic Sensors

Description: All OPL800, OPL801, OPL820 and OPL821 sensors consist of a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip (monolithic chip for OPL820 and OPL821). OPL810, OPL811, OPL812 and OPL813 sensors also have a voltage regulator added to their photologic chips. E

Photologic, BTP

•Four output options available\n• High noise immunity\n• Direct TTL/LSTTL interface\n• TO-18 hermetically sealed package\n• Sensors mechanically and spectrally matched to other Optek devices;

封装/外壳：TO-18 小型 包装：散装 描述：SENSOR PHOTOLOGIC HERMETIC TO-18 传感器，变送器 光学传感器 - 光检测器 - 逻辑输出

HIGH RELIABILITY PHOTOLOGIC HERMETIC SENSORS

Features: ● Four output options ● High noise immunity ● Direct TTL/LSTTL interface ● TO-18 hermetic package ● Mechanically and spectrally matched to the OP130 series devices ● Two sensitivity options ● Data rate 200 kBaud

Photologic Hermetic Sensors

Description: All OPL800, OPL801, OPL820 and OPL821 sensors consist of a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip (monolithic chip for OPL820 and OPL821). OPL810, OPL811, OPL812 and OPL813 sensors also have a voltage regulator added to their photologic chips. E

High Reliability Photologic Hermetic Sensors

Description: The OPL800TX/TXV is a high reliability optoelectronic microcircuit that incorporates a photodiode, linear amplifier and SchmiƩ trigger on a single silicon chip. The device features TTL/STTL compaƟble logic level output which can drive up to 8 TTL loads without addiƟonal interface cir

High Reliability Photologic Hermetic Sensors

Description: The OPL800TX/TXV is a high reliability optoelectronic microcircuit that incorporates a photodiode, linear amplifier and SchmiƩ trigger on a single silicon chip. The device features TTL/STTL compaƟble logic level output which can drive up to 8 TTL loads without addiƟonal interface cir

Photologic, BOC

封装/外壳：TO-18 小型 包装：散装 描述：SENSOR PHOTOLOGIC HERMETIC TO-18 传感器，变送器 光学传感器 - 光检测器 - 逻辑输出

Photologic, BTP

4.0 AMPERE DARLINGTON POWER TRANSISTORS COMPLEMENTARY SILICON 40 WATT 50 WATT

. . . designed for general–purpose amplifier and low–speed switching applications. • High DC Current Gain — hFE = 2000 (Typ) @ IC = 2.0 Adc • Monolithic Construction with Built–in Base–Emitter Resistors to Limit Leakage Multiplication • Choice of Packages — MJE700 and MJE800 series

4.0 AMPERE DARLINGTON POWER TRANSISTORS COMPLEMENTARY SILICON 40 WATT 50 WATT

. . . designed for general–purpose amplifier and low–speed switching applications. • High DC Current Gain — hFE = 2000 (Typ) @ IC = 2.0 Adc • Monolithic Construction with Built–in Base–Emitter Resistors to Limit Leakage Multiplication • Choice of Packages — MJE700 and MJE800 series

POWER TRANSISTORS(4.0A,60-80V,40W)

PLASTIC DARLINGTON COMPLEMENTARY SILICON POWER TRANSISTORS ... designed for general-purpose amplifier and low-speed switching applications. FEATURES * High DCCurrent Gain — hFE = 2000 (Typ) @ IC = 2.0 A * Monolithic Construction with Built-in Base-Emitter Resistors to Limit Leakage Multiplicat

HIGH-FREQUENCY LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR WITH BUILT-IN 2 ELEMENTS MINI MOLD

HIGH-FREQUENCY LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR (WITH BUILT-IN 2 ELEMENTS) MINI MOLD The µPA800T has built-in 2 low-voltage transistors which are designed to amplify low noise in the VHF band to the UHF band. FEATURES • Low Noise NF = 1.9 dB TYP. @ f = 2 GHz, VCE = 1 V,

NSC800TM High-Performance Low-Power CMOS Microprocessor

文件：785.95 Kbytes Page：76 Pages