Silicon Complementary Transistors Low Noise, General Purpose Amplifier

Features: ● Low Collector Saturation Voltage ● Low Output Capacitance ● Low Noise

Bi-Polar Transistor Selector Guide

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

Integrated Circuit 2, 4, & 6 Hour Auto Discriminator for VCR

Description: The NTE1700 is an integrated circuit in an 18–Lead DIP type package designed for 2Hr/4Hr/6Hr automatic selection in video cassette recorders. Features: • The Functions Consist of: Capstan FG Frequency Divider Monostable Mulitvibrator Sample & Hold Circ

Integrated Circuit VCR Cylinder Servo Control Circuit

Features: • Phase Control Circuit • Speed Control Circuit • CTL Amplifier • Capstan PG Amplifier • Sample Hold Type Speed Control • Supply Voltage Either 9V or 12V

Integrated Circuit Color ACC Circuit for VCR

Description: The NTE1702 is an integrated circuit in an 18–Lead DIP type package designed for VCR color ACC and constitute a color processing circuit by combining with the NTE1703 and the NTE15010. Features: • The Functions Consist of: ACC Circuit Balanced Mulitvibrator

Integrated Circuit Color APC (BM/Record/Playback Switching Circuit)

Description: The NTE1703 is an integrated circuit in an 16–Lead DIP type package designed for VCR color APC and constitutes a color processing circuit by combining with the NTE1702 and the NTE15010. Features: • The Functions Consist of: APC Circuit Color–Killer Circuit

Integrated Circuit Audio Power Amplifier, 1.2W

Features: • Incorporating Automatic Operating Point Stabilizer • Low Noise • Variable Frequency Characteristics • Few External Components Required

Integrated Circuit VCR Hall Switch

Description: This device operates with a small permanent magnet and provides switching operation by increasing or decreasing the magnetic flux density. The device features operation on alternate magnetic field and a wide range of operating temperature.

Integrated Circuit AF Power Amp, 5.5W/Channel

Features: Dual Channels −5.5W/Channel Typical Minimum Number of External Parts Required Low Pop Noise at the time of Power Supply ON/OFF and Good Starting Balance Good Ripple Rejection −46dB Typical Good Channel Separation Low Residual Noise (Rg= 0) Built−In Protectors:

Integrated Circuit TV Tuner Band Selector

Description: This NTE1708 is a tuner band selector integrated circuit in a 9–Lead SIP type package intended for use in electronic tuning type TV sets. This device outputs supply voltages to the tuner unit according to 2–input band select signals. Features: • 2 Inputs, 4 Outputs • Dec

Integrated Circuit Dual Balanced Modulator for Video Cameras

Description: The NTE1709 is an integrated circuit in a 9–Lead SIP type package that incorporates two balanced modulators Features: • Dual Balanced Modulator • No External Bias Circuit Required • Carrier Suppression: 40dB Typ

Silicon NPN Transistor Audio/Video Amplifier

Description: The NTE171 is a silicon NPN transistor in a TO202 type case designed for high–voltage TV video and chroma output circuits, high–voltage linear amplifiers, and high–voltage transistor regulators. Features: • High Collector–Emitter Breakdown Voltage Voltage: V(BR)CER = 300V @

Integrated Circuit Record/Playback Circuit for VCR

Description: The NTE1710 is an integrated circuit in a 22–Lead DIP type package designed for tape recorder and VCR audio recording and playback. This device has built–in electronic switches for recording and playback which include the ones for a noise reduction circuit. Features: • Elec

Integrated Circuit 2 Head Recording Amp for VCR

Description: The NTE1711 is an integrated circuit in a 9–Lead SIP type package designed for use as a recording amplifier in VCRs. Features: • Video Head can be a Driver • Supply Voltage of Either 9V or 12V Functions: • Mixer Circuit • Recording Current Amplifier

Integrated Circuit Record Video Signal Processor for VCR

Description: The NTE1712 is an integrated circuit in a 22–Lead DIP type package designed for use in VCR recording video signal processing. Features: • Video AGC Circuit • Pre–Emphasis Circuit • Dynamic–Emphasis Circuit • White/Dark Chip • FM Modulator • Supply Voltage: 5V

Integrated Circuit Line Noise Canceller for VCR

Description: The NTE1713 is an integrated circuit in an 18–Lead DIP type package designed for use as a line noise canceller in VCRs. Features: • The Functions Consist of: FM Demodulator Differential Amplifier • Supply Voltage: 5V

Integrated Circuit Remote Control Amplifier/Detector

Description: The NTE1714M is and integrated circuit in an 8–Lead DIP type package designed for use in infrared remote control applications. It provides the high gain and pulse shaping needed to couple the signal from an IR receiver diode to the tuning control system logic. Features: • H

Integrated Circuit Remote Control Amplifier/Detector

Description: The NTE1714S is and integrated circuit in an 8–Lead SIP type package designed for use in infrared remote control applications. It provides the high gain and pulse shaping needed to couple the signal from an IR receiver diode to the tuning control system logic. Features: • W

Integrated Circuit 8-Circuit Display Driver

Description: The NTE1715 is an integrated circuit in an 18–Lead DIP type package designed for high–breakown fluorescent display tube drive. Features: • Built–In 8 Circuits • Output Incorporating Pull–Down Resistor for Direct Fluorescent Display Tube Drive • Direct Input for CMOS o

Integrated Circuit Reversible Motor Driver for VCR

Features: • Supply Voltage Range: 6V to 18V • Power Dissipation: 2200mW • Output Motor Driving Current up to 1600mA • Two Control Logic Inputs Allow Switching of Three Output States: Forward Reverse Braking • Low Standby Current • Adjustable Output Voltage Enabl

Integrated Circuit Dual Comparator

Description: The NTE1718 is an dual voltage comparator integrated circuit in a 9–Lead SIP type package with a wide range of supply voltages. Features: • Wide Range of Operating Voltages: Single Supply: 2V to 36V Dual Supply: ±1V to ±18V • Low Circuit Current: 0.6mA Typ.

Integrated Circuit Pulse Width Modulator (PWM) Regulator

Description: The NTE1720 PWM switching regulator control circuit contains all the essential circuitry to implement single–ended or push–pull switching regulators. Included on the circuit are oscillator, voltage refer ence, a pulse width modulator, error amplifier, overload protection circuitry

Integrated Circuit Pulse Width Modulator (PWM) Regulator

Description: The NTE1721 and NTE1723 are pulse width modulator control–circuits designed to offer improved performance and lowered external parts count when implemented for controlling all types of switching power supplies. The no–chip +5.1V reference is trimmed to ±1 and the input common–mode

Integrated Circuit Pulse Width Modulator (PWM) Control Circuit

Description: The NTE1722 is a high performance pulse width modulator integrated circuit in an 18–Lead DIP type package intended for fixed frequency switching regulators and other power control applications. Functions included in this IC are a temperature compensated voltage reference, sawtooth

Integrated Circuit Pulse Width Modulator (PWM) Regulator

Description: The NTE1721 and NTE1723 are pulse width modulator control–circuits designed to offer improved performance and lowered external parts count when implemented for controlling all types of switching power supplies. The no–chip +5.1V reference is trimmed to ±1 and the input common–mode

Integrated Circuit Audio Power Amplifier, 20W

Description: This device is a monolithic integrated circuit and a power amplifier designed for Hi−Fi audio sets and in a 10 pin single in−line plastic package. NTE1724 can provide 20W (Typ) to 8Ωat 1 THD and ±22V supply voltage. Features: High Output Power: 20W Typ (VCC= ±22V,

Integrated Circuit Color TV Picture IF System

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Output Current, IO . . . . . . . . . . . . . . . . . . . . . . . . .

Integrated Circuit TV Signal Processor

Description: The NTE1727 is an integrated circuit designed for color TV deflection signal processing circuits. It can be operated with a 12V power supply and is suitable for compact and medium–sized color TV sets. Features: • Built–In Vertical Deflection Driver Circuit • Incorporatin

Integrated Circuit VIF & SIF Circuit for VCR

Description: The NTE1728 is an integrated circuit in a 30–Lead DIP type package containing the VIF section and SIF on a single chip. Since this device is capable of performing video detection and sound detection independently or simultaneously, it can be applied to various sets from popular typ

Integrated Circuit Pulse Width Modulator (PWM) Control Circuit

Description: The NTE1729 is an inverter control unit in a 16–Lead DIP type package which provides all the control circuitry for PWM type switching regulators. Included in this device is the voltage reference, dual error amplifiers, oscillator, pulse width modulator, pulse steering flip flop, du

Silicon NPN Transistor Darlington Preamp, Medium Speed Switch

Description: The NTE172A is a silicon NPN Darlington transistor in a TO92 type case designed for preamplifier input stages requiring input impedances of several megohms or extremely low level, high gain, low noise amplifier applications.

Integrated Circuit Dual Preamp

Features: Dual Pre Amplifier for Car or Home Stereo Use. High Voltage Gain: GVO = 100dB (Typ) @ f = 1kHz Excellent Channel Separation and High Ripple Rejection: CH Sep. = 70dB (Typ) R.R = 50dB (Typ) Low Noise: VNI = 1.0µVrms (Typ) at Rg = 2.2kΩ, BW = 15Hz to 30kHz

Integrated Circuit CMOS 10 Number Pulse Dialer

Description: The NTE1731 is a CMOS LSI repertory dialer with ten 16–digit number memory storage in a 16–Lead DIP type package. The pulse and mute signal outputs resulting from keyboard input are like those of a pulse dialer. The NTE1731 incorporates a 64 x 10 bit RAM which is used to store the

Integrated Circuit Module, Hybrid, TV Voltage Regulator w/4W Audio Output

Features: • Series Regulator and Audio Output Amp Incorporated into a Single Package • Low Power Dissipation, Low Distortion, High Gain • Excellent Heat Radiation and Thermal Stability Functions: • Line Operated Series Regulator • Line Operated Audio Output Amp Application

Integrated Circuit Module, 4 Output Positive Voltage Regulator for VCR

Features: • 4 Outputs • Output Voltage Select Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs • Cutoff Function

Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

Features: • 3 Outputs • Cutoff Function

Integrated Circuit Module, 4-Phase Stepping Motor Driver

Features: Chopper Operation Capable of Providing Good Rising Characteristic of Motor Current and Low Heat Dissipation due to Constant Current. PAUSE Pin can be used to control Pause Action Unipolar Drive make it Possible to Drive Hybrid, PM, or VR Type Stepping Motor

Integrated Circuit Module, Chopper & Chopper Parallel w/2-Output Voltage Regulator

Features: • 2 Outputs for Miicrocomputer Power Supply (5V) and Motor Drive Power Supply (24V) and Capable of Delivering 2 Regulated Voltage Outputs from 1 Rectifier • Independent Overcurrent Protectors for 2 Outputs (Foldback Characteristics) Applications: • Serial Printers, Line Pri

Integrated Circuit TV Remote Control Receiver

Description: The NTE1738 is a 29–function remote–control receiver circuit manufactured by aluminum–gate CMOS technology for use in television receivers, audio equipment, and the like using infrared for transmission. It enables direct control of 12 functions at the receiver. Features: •

Integrated Circuit TV Horizontal/Vertical Countdown Digital Sync System

Description: The NTE1739 is a video sync system in a 16–Lead DIP type package designed for use in television, monitor or video display products. The NTE1739 contains a horizontal phase–locked oscillator and vertical countdown. It also features composite blanking and burst–gate outputs which, wh

Integrated Circuit TV Fixed Voltage Regulator

Features: Triple Diffused Darlington Transistor Chips Incorporated Compact Plastic Package with Industry Standard Reliability Output Voltage is Pre–Fixed – No External Adjustment is Required

Integrated Circuit TV Fixed Voltage Regulator

Features: Triple Diffused Darlington Transistor Chips Incorporated Compact Plastic Package with Industry Standard Reliability Output Voltage is Pre–Fixed – No External Adjustment is Required

Integrated Circuit Dual dbxII Noise Reduction System

Description: The NTE1744 is an integrated circuit in a 22–Lead DIP type package designed for use in dbxII noise reduction circuits for stereo applications. This device can be used for U.S. sound multiplex TV applications and low voltage operation (1.8V) allows the NTE1744 to be used in battery–

Integrated Circuit High Speed Divider 1/20, 1/100 for VCR

Description: The NTE1745 is a semiconductor integrated circuit in an 8–Lead SIP type package consisting of a built–in 1/20 and 1/100 high–speed frequency divider featuring an ECL circuit configuration. Features: • High–Speed Operation (fmax = 130MHz) • Operation at Low Input Amplitud

Integrated Circuit TV Video Processing Circuit

Description: The NTE1747 is an integrated circuit in a 28–Lead DIP type package designed for color TV video and chrominance signal processing circuit. Features: • Including Video and Chrominance Signal Processing Circuit on a Single Chip, for Compact Set Design • Including Circuit Fo

Integrated Circuit DC Motor Driver

Features: ● Linear or Logic Operation ● Bi−Directional Drive Capability Applications: ● DC Motor for VCR, CD

Integrated Circuit Push-Pull Four Channel Driver

Description: The NTE1749 is a quad push–pull driver capable of delivering output currents to 1A per channel. Each channel is controlled by a TTL–compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four transistors. A separate sup

Silicon Complementary Transistors High Voltage, Medium Power Switch

Description: The NTE38 (PNP) and NTE175 (NPN) complementary silicon transistors are designed for high–speed switching and linear amplifier applications for high–voltage operational amplifiers, switching regulators, converters, inverters, deflection stages, and high fidelity amplifiers. Fea

Integrated Circuit TV SCR Driver

Features: ● SCR Driver for TV Switching Mode Power Supply ● High Stable Inner Reference Diode ● High Output Current Capability ● Simple Configuration of Power Supply

Integrated Circuit Pulse Width Modulator (PWM) Control Circuit

Description: The NTE1753 is a fixed–frequency pulse width modulation control circuit in a 14–Lead DIP type pack age incorporating the primary building blocks required for the control of a switching power supply. Output pulse width modulation is accomplished by comparison of the positive sawt

Integrated Circuit Vertical Deflection Output Circuit

Description: The NTE1754 is a full–performance vertical deflection output circuit in a 9–Lead SIP type package intended for direct drive of the deflection coils and it can be used for a wide range of 90° and 110° deflection systems. The NTE1754 is provided with a guard circuit which blanks the

Integrated Circuit Remote Control Receiver

Description: The NTE1757 is an MOS/LSI integrated circuit in an 18–Lead DIP tpye package designed for use as a receiver of remote control signals generated by a transmitter circuit, using PPM (Pulse Position Modulation) encoding technique. The receiver has 5 digital outputs whose response to PP

Integrated Circuit CMOS, 27 Command TV Remote Control Transmitter

Description: The NTE1758 is a CMOS integrated circuit in a 16–Lead DIP type package designed for controlling the transmitter of remote control systems for TV sets, etc. By using this device in combination with the NTE1759 receiver control IC, a direct channel control system can be obtained. Whe

Integrated Circuit PMOS, 26 Command TV Remote Control Reciever

Description: The NTE1759 is a PMOS integrated circuit in a 16–Lead DIP type package designed for use in decoding the signal received from a transmitter in TV remote control applications. Direct channel selection can be obtained by combining the NTE1759 receiver with the NTE1758 transmitter cont

Integrated Circuit Infrared Remote Control Preamp

Features: High Frequency Amplifier with a Control Range of 66dB Synchronous Demodulator and Reference Amplifier AGC Detector Pulse Shaper Q–Factor Killing of the Input Selectivity, which is Controlled by the AGC Circuit Input Voltage Limiter Absolute Maximum Ratings:

Integrated Circuit Infrared Remote Control Preamp

Features: High Frequency Amplifier with a Control Range of 66dB Synchronous Demodulator and Reference Amplifier AGC Detector Pulse Shaper Q–Factor Killing of the Input Selectivity, which is Controlled by the AGC Circuit Input Voltage Limiter Absolute Maximum Ratings:

Integrated Circuit Infrared Preamplifier

Description: The NTE1764 is an infrared preamplifier in a 14–Lead DIP type package and contains four main parts: the gain–controlled amplifier I, the amplifier II, the pulse–separating amplifier III, and the inverter IV. The amplifier I has a wide dynamic range and thus ensures interference

Integrated Circuit Dual Channel Current Mode Controller

Description: The NTE1765 is a high performance, fixed frequency, dual current mode controller in a 16–Lead DIP type package. This device is specifically designed for Off–Line and DC to DC converter applications offering the designer a cost effective solution with minimal external components. Th