Silicon Complementary Transistors High Current Amplifier

Description: The NTE11 (NPN) and NTE12 (PNP) are silicon complementary transistors in a TO92 type case designed for use in low–frequency output amplifier, DC converter, and strobe applications. Features: • High Collector Current: IC = 5A Max • Low Collector–Emitter Saturation Voltage

Complementary Transistors

Integrated Circuit TV Sound IF Amp, FM IF Amp

Features: • High Power Gain: GP = 69dB (Typ) • Good Limiter Characteristic: VIN (lim) = 600µV (Typ) • High Output Voltage: VOM = 800V (Typ) • Wide Frequency Range: f = 1kHz to 20MHz • Operating Supply Voltage Range: VCC = 6V to 15V

Integrated Circuit General Purpose Amp, Mixer, and Oscillator

Features: • General Amplifier Circuit • High Frequency Amplifier • Mixer, OSC and Modulator • Video Amplifier • Recommend RF and IF Amplifier (f = 0 to 100MHz) • AGC is possible

Integrated Circuit 3 Stage Audio Amplifier

Features: • Recommended for Driver of Push–Pull Output Stage • Possible to Drive 4 Watt Output Stage • Wide Range of Supply Voltage

Integrated Circuit General Purpose, Low Noise Preamplifier

Features: • Low Noise • Wide Operating Supply Voltage Range: VCC = 3V to 12V

Integrated Circuit Wide and Narrow Band Amp, FM/IF Limiter

Applications: • For FM IF Amplifier • For TV SIF Amplifier

Integrated Circuit FM Stereo Demodulator

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: • Low lead inductance stripline package for easier design and increased broadband capability. • Balanced Emitt

Germanium Diode General Purpose

Features: • Low Forward Voltage Drop • Low Power Consumption • Very Low Noise Level

Germanium Diode Point Contact Diode(Matched Pair)

Description: The NTE110MP is a matched pair (2) of germanium diodes designed for use in detector circuits of radios, televisions, stereos, and switching applications.

Integrated Circuit Audio Power Amp, 2W

Description: The NTE1110 is a 2 Watt Audio Power Amp packaged in a 16−Lead DIP plastic package with a heat sink fin.

Integrated Circuit Audio Power Amplifier, 4W @ 24V

Description: The NTE1112 is an integrated monolithic circuit in a 14−lead DIP plastic package with external heat−sink. Features: • Output Power 2.2W (18V−16Ω) • Low Quiescent Output Current • High Efficiency

Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

Integrated Circuit Audio Power Amplifier, 5W

Description: The NTE1116 is a monolithic integrated circuit designed for use as a low frequency class B amplifier. The external cooling tabs enable 2.5 watts of output power to be achieved without the use of an external heat sink and 5 watts of output power using a small area of the P.C. board

Integrated Circuit Audio Power Amp, 2 Watt

Description: The NTE1117 is a monolithic integrated audio amplifier in a 14–Lead DIP type plastic package designed for use as a low frequency class B amplifier with a wide range of supply voltage of 3V to 16V. Features: • Minimum Working Voltage of 3V • Low Quiescent Current • Low

Silicon Small Signal Schottky Diode

Description: The NTE112 is a metal to silicon junction diode in a DO35 type package primarly intended for UHF mixers and ultrafast switching applications.

Integrated Circuit TV Video IF Amplifier

Features: • High Power Gain: 48dB Typ @ f = 58MHz • AGC Operating by External DC Control Voltage • High Gain Reduction: 60dB Min @ f = 58MHz • Low Reverse Transfer Admittance: 1.0µmho Typ @ f = 58MHz • Nearly Constant Input and Output Admittance Over Entire AGC Range

Integrated Circuit Color TV Demodulator

Features: • Color TV Demodulator (Function) • Color Difference Signal Amplifier • Chroma Demodulator • Color Matrix Circuit • DC Hue Control • High Sensitivity: Output VB –Y = 2.5Vp–p Input 0.2Vp–p • Including MOS Capacitance for Filter • Hue is controlled by DC

Integrated Circuit High Gain Audio Preamp

Features: • Power Supply with Wide Working Voltage Range • High Open–Loop Gain • Extremely Low Distortion • Low Noise • High Input Impedance and Low Output Impedance • Low Current Dissipation Applications: • Car Stereos • Tape Recorders

Integrated Circuit FM Multiplex Stereo Decoder

Integrated Circuit FM Multiplex Stereo Decoder

Integrated Circuit FM Tuning System

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage (Pin 14), VCC . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 15V Lamp Voltage, VLAMP . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Lamp Current, VLAMP . . . . . . . .

Integrated Circuit Audio Power Amplifier, 5.8W

Description: The NTE1155 is an integrated circuit in a 10–Lead SIP type package designed for use as an audio power amplifier for car radio and car stereo applications Features: • Output Power: POUT = 5.8W (Typ) at VCC = 13.2V, RL = 4Ω, THD = 10 POUT = 9.2W (Typ) at VCC = 13.

General Purpose Silicon Rectifier

Description: The NTE116 is a general purpose silicon rectifier in a DO–41 case designed for low power and switching applications.

Integrated Circuit TV Video/Sound IF Amp, Detector

Features: • Video IF Amplifier, Synchronous Detector • Video Differential Amplifier • AFT Carrier Amplifier • Sound IF Amplifier • FM Differenial Peak Detector • DC Sound Volume Control Circuit • Sound Preamplifier Circuit

Integrated Circuit TV Sound IF Amp & FM Detector

Integrated Circuit TV Sound IF Amp & FM Detector

Integrated Circuit TV Video Signal Processing Circuit

Features: • DC Controlled Adjustment • Sync. Separator (Including Noise Canceller) • Pedestal Clamping (Including Clamping Pulse Generator) • Brightness Control • Blanking Circuits

Integrated Circuit Module, Hybrid, Audio Output, 5.8W for Car Radio & CB

Integrated Circuit Module, Hybrid, Audio Output, 5.8W for Car Radio & CB

Integrated Circuit Phase Lock Loop(PLL) Frequency Synthesizer

Description: The NTE1167 consists of a crystal oscillator, 10 bit divider, phase comparator, and a programmable divide–by–N 9–bit counter in a single CMOS 16–Lead DIP type integrated circuit. This device is designed for use in frequency synthesizers and phase locked loop applications for CB tra

General Purpose Silicon Rectifier

Features: • Cylindrical Design with Axial Leads for Simple Handling and Installation • High Maximum Forward Current Rating: 750mA @ TA = +75°C • Maximum Ambient Operating Temperature: +175°C

Integrated Circuit Dual Preamp for Car Radio

Features: • Fewer Peripheral Parts • Low Noise • 8–Lead SIP Type Package

Integrated Circuit Operational Amplifier

Description: The NTE1171 is a general purpose operational amplifier in an 8–Lead Metal Can type package. Advanced processing techniques make possible an order of magnitude reduction in input currents, and a redesign of the biasing circuitry reduces the temperature drift of the input current. Fea

Integrated Circuit Phase-Frequency Detector

Integrated Circuit Phase–Frequency Detector

Integrated Circuit TV Automatic Fine Tuning (AFT) Circuit

Description: The NTE1174 is a monolithic TV Automatic Fine Tuning (AFT) circuit in a 14−Lead Staggered DIP type package that provides an AFT voltage and an amplified 4.5MHz intercarrier sound signal. When connected to an output of an IF amplifier the NTE1174 provides the signal processing (ampl

Integrated Circuit TV Luminance Processor

Description: The NTE1177 is a monolithic silicon integrated circuit in a 14–Lead DIP type package that performs the luminance processing functions of amplification; contrast, brightness and peaking control; blanking; and black–level clamping. Features: • Black–Level Clamping • Linear

Integrated Circuit Pre−Amplifier with ALC Transistors

Features: • Low Noise, Low Distortion • Includes ALC Transistor

Integrated Circuit Audio Power Amplifier, 1.5W

Description: The NTE1180 is a linear integrated circuit with attached heat sink pin. The device is a 1.5W AF power amplifier. The device is suitable for FM/AM radio, cassette tape recorder, portable player or interphone use.

Integrated Circuit FM Stereo Multiplex Demodulator

Integrated Circuit FM Stereo Multiplex Demodulator

Integrated Circuit Audio PreAmp

Features: • Wide Range of Operating Supply Voltage • High Gain, High Output Power • Low Distortion and Noise • Excellent Hum Rejection • Extremely High Resistance to Damage from Short Circuit of a Load

Integrated Circuit TV Video IF Detector

Integrated Circuit TV Video IF Detector

Integrated Circuit VCO for Phase Lock Loop(PLL)

Description: The NTE1192 is a Phase–Locked Loop Frequency Synthesizer packaged in a 9–lead SIP type package.

Integrated Circuit Low Noise, High Gain Preamp

Description: The NTE1195 is a low noise, high gain 2 stage preamplifier with high input impedance in a 7–Lead SIP type package suitable for use with car stereos, cassette tape recorders, and home stereo systems.

Integrated Circuit OSC and 12-Stage Divider

Description: The NTE1197 is an integrated circuit in a 9–Lead SIP type package consisting of a 12 stage frequency divider and an amplifier for use in crystal oscillator applications. This device is designed to operate with an input frequency of 10.24MHz. Available reference dividing ratios are

Integrated Circuit CMOS Frequency Divider

Integrated Circuit CMOS Frequency Divider

Integrated Circuit CMOS Frequency Divider

Description: The NTE1199 is an LSI CMOS circuit in a 24–Lead DIP type package designed for use in frequency divider applications in CB transceivers. This device contains a prescaler, divider, and binary input programmable circuitry.

Integrated Circuit General Purpose, Low Noise Preamplifier

Integrated Circuit Wide and Narrow Band Amp, FM/IF Limiter

Axial Lead Chokes