8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

General Description The MAX7480 8th-order, lowpass, Butterworth, switched-capacitor filter (SCF) operates from a single +5V supply. The device draws only 2.9mA of supply current and allows corner frequencies from 1Hz to 2kHz, making it ideal for low-power post-DAC filtering and anti-aliasing appl

8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

Features © 8th-Order, Lowpass Butterworth Filter © Low Noise and Distortion: -73dB THD + Noise © Clock-Tunable Corner Frequency (1Hz to 2kHz) © 100:1 Clock-to-Corner Ratio © +5V Single-Supply Operation © Low Power 2.9mA (Operating Mode) 0.2μA (Shutdown Mode) © Available in 8-Pin SO/DIP Pa

8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

Features © 8th-Order, Lowpass Butterworth Filter © Low Noise and Distortion: -73dB THD + Noise © Clock-Tunable Corner Frequency (1Hz to 2kHz) © 100:1 Clock-to-Corner Ratio © +5V Single-Supply Operation © Low Power 2.9mA (Operating Mode) 0.2μA (Shutdown Mode) © Available in 8-Pin SO/DIP Pa

8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

General Description The MAX7480 8th-order, lowpass, Butterworth, switched-capacitor filter (SCF) operates from a single +5V supply. The device draws only 2.9mA of supply current and allows corner frequencies from 1Hz to 2kHz, making it ideal for low-power post-DAC filtering and anti-aliasing appl

8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

General Description The MAX7480 8th-order, lowpass, Butterworth, switched-capacitor filter (SCF) operates from a single +5V supply. The device draws only 2.9mA of supply current and allows corner frequencies from 1Hz to 2kHz, making it ideal for low-power post-DAC filtering and anti-aliasing appl

8th-Order, Lowpass, Butterworth, Switched-Capacitor Filter

Features © 8th-Order, Lowpass Butterworth Filter © Low Noise and Distortion: -73dB THD + Noise © Clock-Tunable Corner Frequency (1Hz to 2kHz) © 100:1 Clock-to-Corner Ratio © +5V Single-Supply Operation © Low Power 2.9mA (Operating Mode) 0.2μA (Shutdown Mode) © Available in 8-Pin SO/DIP Pa

双向视频滤波器/缓冲器，用于复合视频及S端子便携式多媒体产品

MAX7481/MAX7482双向视频滤波器/缓冲器可以为便携媒体设备提供回放模式的复合视频(CVBS)以及S-Video (Y/C)视频信号重建滤波器和线路驱动缓冲器，提供录像模式的抗混叠滤波器。每个通道都包括低通滤波器和输出缓冲器，能够为150Ω标准负载(直流耦合到地)提供2VP-P视频驱动信号。在录像模式下，MAX7481/MAX7482的输出缓冲器具有+6dB增益。在回放模式下，MAX7481的输出缓冲器具有+6dB增益，而MAX7482的输出缓冲器则具有+7dB增益。\n MAX7481/MAX7482具有DirectDrive™特性，采用内部负电压电荷泵以及稳压器将输出消隐电平保持 \n• 复合和S-Video，视频回放或视频记录接口，用于便携视频设备 \n• 在便携设备中共享连接器可节省空间 \n• DirectDrive \n• 无需昂贵的交流耦合电容 \n• 单电源即可使消隐电平钳位至地 \n• 复合信号和Y/C信号 \n• 先进的掉电模式，可延长电池寿命 \n• 关断模式具有低电源电流< 1µA (典型值) \n• 滤波器响应理想用于NTSC和PAL \n• +6dB (MAX7481)或+7dB (MAX7482)增益 \n• +2.7V至+3.6单电源工作 \n• 小型、28引脚、TQFN封装(5mm x 5mm);

50V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers

FEATURES Low offset voltage: 7μV maximum Extremely low offset voltage drift: 30nV/°Cmaximum Low voltage noise density: 5.8nV/√Hz typical 117nV p-p typical from 0.1Hz to 10Hz Low input bias current: 50pA typical Gain-bandwidth product: 2.7MHz Single-supply operation: input voltage ran

丝印代码：A6R；50V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers

FEATURES Low offset voltage: 7μV maximum Extremely low offset voltage drift: 30nV/°Cmaximum Low voltage noise density: 5.8nV/√Hz typical 117nV p-p typical from 0.1Hz to 10Hz Low input bias current: 50pA typical Gain-bandwidth product: 2.7MHz Single-supply operation: input voltage ran

丝印代码：A6R；50V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers

FEATURES Low offset voltage: 7μV maximum Extremely low offset voltage drift: 30nV/°Cmaximum Low voltage noise density: 5.8nV/√Hz typical 117nV p-p typical from 0.1Hz to 10Hz Low input bias current: 50pA typical Gain-bandwidth product: 2.7MHz Single-supply operation: input voltage ran

丝印代码：A6R；50V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers

FEATURES Low offset voltage: 7μV maximum Extremely low offset voltage drift: 30nV/°Cmaximum Low voltage noise density: 5.8nV/√Hz typical 117nV p-p typical from 0.1Hz to 10Hz Low input bias current: 50pA typical Gain-bandwidth product: 2.7MHz Single-supply operation: input voltage ran

双向视频滤波器/缓冲器，用于复合视频及S端子便携式多媒体产品

MAX7481/MAX7482双向视频滤波器/缓冲器可以为便携媒体设备提供回放模式的复合视频(CVBS)以及S-Video (Y/C)视频信号重建滤波器和线路驱动缓冲器，提供录像模式的抗混叠滤波器。每个通道都包括低通滤波器和输出缓冲器，能够为150Ω标准负载(直流耦合到地)提供2VP-P视频驱动信号。在录像模式下，MAX7481/MAX7482的输出缓冲器具有+6dB增益。在回放模式下，MAX7481的输出缓冲器具有+6dB增益，而MAX7482的输出缓冲器则具有+7dB增益。\n MAX7481/MAX7482具有DirectDrive™特性，采用内部负电压电荷泵以及稳压器将输出消隐电平保持 \n• 复合和S-Video，视频回放或视频记录接口，用于便携视频设备 \n• 在便携设备中共享连接器可节省空间 \n• DirectDrive \n• 无需昂贵的交流耦合电容 \n• 单电源即可使消隐电平钳位至地 \n• 复合信号和Y/C信号 \n• 先进的掉电模式，可延长电池寿命 \n• 关断模式具有低电源电流< 1µA (典型值) \n• 滤波器响应理想用于NTSC和PAL \n• +6dB (MAX7481)或+7dB (MAX7482)增益 \n• +2.7V至+3.6单电源工作 \n• 小型、28引脚、TQFN封装(5mm x 5mm);

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifier

FEATURES Low offset voltage: 300μV maximum Low input bias currents: 5pA maximum Low noise: 9nV/√Hz Wide bandwidth: 10MHz High slew rate: 5V/μs High open-loop gain: 120dB Unity gain stable Single-supply operation: 5.5V Low supply current: 1.15mA/amplifier APPLICATIONS Photodi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifier

FEATURES Low offset voltage: 300μV maximum Low input bias currents: 5pA maximum Low noise: 9nV/√Hz Wide bandwidth: 10MHz High slew rate: 5V/μs High open-loop gain: 120dB Unity gain stable Single-supply operation: 5.5V Low supply current: 1.15mA/amplifier APPLICATIONS Photodi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifier

FEATURES Low offset voltage: 300μV maximum Low input bias currents: 5pA maximum Low noise: 9nV/√Hz Wide bandwidth: 10MHz High slew rate: 5V/μs High open-loop gain: 120dB Unity gain stable Single-supply operation: 5.5V Low supply current: 1.15mA/amplifier APPLICATIONS Photodi

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifier

FEATURES Low offset voltage: 300μV maximum Low input bias currents: 5pA maximum Low noise: 9nV/√Hz Wide bandwidth: 10MHz High slew rate: 5V/μs High open-loop gain: 120dB Unity gain stable Single-supply operation: 5.5V Low supply current: 1.15mA/amplifier APPLICATIONS Photodi

5V, CMOS, Rail-to-Rail, General-Purpose Amplifiers

FEATURES Single-supply operation: 2.7V to 5.5V Low supply current: 45μA/amplifier Wide bandwidth: 1MHz No phase reversal Low input bias current: 4pA Unity gain stable Rail-to-rail input and output

5V, CMOS, Rail-to-Rail, General-Purpose Amplifiers

FEATURES Single-supply operation: 2.7V to 5.5V Low supply current: 45μA/amplifier Wide bandwidth: 1MHz No phase reversal Low input bias current: 4pA Unity gain stable Rail-to-rail input and output

5V, CMOS, Rail-to-Rail, General-Purpose Amplifiers

FEATURES Single-supply operation: 2.7V to 5.5V Low supply current: 45μA/amplifier Wide bandwidth: 1MHz No phase reversal Low input bias current: 4pA Unity gain stable Rail-to-rail input and output

5V, CMOS, Rail-to-Rail, General-Purpose Amplifiers

FEATURES Single-supply operation: 2.7V to 5.5V Low supply current: 45μA/amplifier Wide bandwidth: 1MHz No phase reversal Low input bias current: 4pA Unity gain stable Rail-to-rail input and output

30V, Single Supply, Low Bias Current, RRO, 8MHz JFET Op Amp

FEATURES Wide gain bandwidth product: 8MHz typical High slew rate 23V/μs typical (low to high) −18V/μs typical (high to low) Low input bias current: ±15pA maximum at TA = 25°C Low offset voltage: ±10mV maximum at TA = 25°C Low offset voltage drift: ±4μV/°C typical Input voltage ran

30V, Single Supply, Low Bias Current, RRO, 8MHz JFET Op Amp

FEATURES Wide gain bandwidth product: 8MHz typical High slew rate 23V/μs typical (low to high) −18V/μs typical (high to low) Low input bias current: ±15pA maximum at TA = 25°C Low offset voltage: ±10mV maximum at TA = 25°C Low offset voltage drift: ±4μV/°C typical Input voltage ran

30V, Single Supply, Low Bias Current, RRO, 8MHz JFET Op Amp

FEATURES Wide gain bandwidth product: 8MHz typical High slew rate 23V/μs typical (low to high) −18V/μs typical (high to low) Low input bias current: ±15pA maximum at TA = 25°C Low offset voltage: ±10mV maximum at TA = 25°C Low offset voltage drift: ±4μV/°C typical Input voltage ran

30V, Single Supply, Low Bias Current, RRO, 8MHz JFET Op Amp

FEATURES Wide gain bandwidth product: 8MHz typical High slew rate 23V/μs typical (low to high) −18V/μs typical (high to low) Low input bias current: ±15pA maximum at TA = 25°C Low offset voltage: ±10mV maximum at TA = 25°C Low offset voltage drift: ±4μV/°C typical Input voltage ran

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85% to 90%. Quiescent supp

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

3.3V, Step-Down, Current-Mode PWM DC-DC Converters

General Description The MAX748A/MAX763A are 3.3V-output CMOS, step down switching regulators. The MAX748A accepts inputs from 3.3V to 16V and delivers up to 500mA. The MAX763A accepts inputs between 3.3V and 11V and delivers up to 500mA. Typical efficiencies are 85 to 90. Quiescent supply current

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC FILTER 2KHZ LOWPASS 8SOIC 集成电路（IC） 滤波器 - 有源

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC FILTER 2KHZ LOWPASS 8SOIC 集成电路（IC） 滤波器 - 有源

Bidirectional Video Filters/Buffers for Composite and S-Video Portable Media Devices

文件：860.82 Kbytes Page：13 Pages

Bidirectional Video Filters/Buffers for Composite and S-Video Portable Media Devices

文件：860.82 Kbytes Page：13 Pages

Bidirectional Video Filters/Buffers for Composite and S-Video Portable Media Devices

文件：860.82 Kbytes Page：13 Pages

Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifier

Bidirectional Video Filters/Buffers for Composite and S-Video Portable Media Devices

文件：860.82 Kbytes Page：13 Pages

Integrated Circuit TV Sound Circuit

Description: The NTE748 is an integrated circuit in a 14–Lead DIP type pacjage designed for IF limiting, detection, audio preamplifier and driver for the sound portion of a TV receiver. Features: ● Excellent Limiting with 80µV(rms) Input Signal typ ● Large Output–Voltage Swing–to 3.5V(rms) typ

PRECISION SINGLE OPERATIONAL AMPLIFIER

DESCRIPTION The UA748 is a general purpose operational amplifier built on a single silicon chip. The resulting close match and tight thermal coupling gives low offsets and temperature drift as well as fast recovery from thermal transients. ■ INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE ■ FR

PRECISION SINGLE OPERATIONAL AMPLIFIER

DESCRIPTION The UA748 is a general purpose operational amplifier built on a single silicon chip. The resulting close match and tight thermal coupling gives low offsets and temperature drift as well as fast recovery from thermal transients. ■ INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE ■ FR

LM748 Operational Amplifier

文件：126.69 Kbytes Page：6 Pages

LM748 Operational Amplifier

文件：126.69 Kbytes Page：6 Pages