Blade Fuses

Ultra Low Offset Voltage Operational Amplifier

General Description The MAX400 guaranteed maximum 10µV offset error is the lowest input offset voltage of any commercially available (nonchopper) monolithic amplifier. The MAX400 represents a 2.5 times improvement over the highest grade OP07 (the OP07A), and a 5 times improvement over the best co

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

2.5GHz 45dB RF-Detecting Controllers

General Description The MAX4000/MAX4001/MAX4002 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) operating in the 0.1GHz to 2.5GHz frequency range. A typical dynamic range of 45dB makes this family of log amps useful in a variety of wireless applications

100MHz to 2500MHz, 45dB RF Detector in a UCSP

General Description The MAX4003 low-cost, low-power logarithmic amplifier is designed to detect the power levels of RF power amplifiers (PAs) operating from 100MHz to 2500MHz. A typical dynamic range of 45dB makes this logarithmic amplifier useful in a variety of wireless applications including c

100MHz to 2500MHz, 45dB RF Detector in a UCSP

General Description The MAX4003 low-cost, low-power logarithmic amplifier is designed to detect the power levels of RF power amplifiers (PAs) operating from 100MHz to 2500MHz. A typical dynamic range of 45dB makes this logarithmic amplifier useful in a variety of wireless applications including c

100MHz to 2500MHz, 45dB RF Detector in a UCSP

General Description The MAX4003 low-cost, low-power logarithmic amplifier is designed to detect the power levels of RF power amplifiers (PAs) operating from 100MHz to 2500MHz. A typical dynamic range of 45dB makes this logarithmic amplifier useful in a variety of wireless applications including c

100MHz to 2500MHz, 45dB RF Detector in a UCSP

General Description The MAX4003 low-cost, low-power logarithmic amplifier is designed to detect the power levels of RF power amplifiers (PAs) operating from 100MHz to 2500MHz. A typical dynamic range of 45dB makes this logarithmic amplifier useful in a variety of wireless applications including c

High-Accuracy, High-Side Current Monitors in SOT23

General Description The MAX4004/MAX4006 precision, high-side, current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference curre

High-Accuracy, High-Side Current Monitors in SOT23

General Description The MAX4004/MAX4006 precision, high-side, current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference curre

950MHz FET-Input Buffer with 75??Output

General Description The MAX4005 is a ±5V, single-ended unity-gain buffer with a high-impedance JFET input, intended to drive a 75Ω load. A 75Ω thin-film output resistor is included onboard to minimize reflections when driving a 75Ω load through a transmission line of arbitrary length. Gain in thi

950MHz FET-Input Buffer with 75??Output

General Description The MAX4005 is a ±5V, single-ended unity-gain buffer with a high-impedance JFET input, intended to drive a 75Ω load. A 75Ω thin-film output resistor is included onboard to minimize reflections when driving a 75Ω load through a transmission line of arbitrary length. Gain in thi

High-Accuracy, High-Side Current Monitors in SOT23

General Description The MAX4004/MAX4006 precision, high-side, current monitors are specifically designed for monitoring photodiode current in fiber applications. They offer a connection point for the reference current and a monitor output that produces a signal proportional to the reference curre

High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

High Voltage, Low Power Comparator

General Description MAX40070/MAX40072 is a family of single micropower comparators ideal for a wide variety of battery operated devices in computing, industrial, medical, and IoT applications that have extremely tight board space and power constraints while requiring high levels of precision.

High Voltage, Low Power Comparator

General Description MAX40070/MAX40072 is a family of single micropower comparators ideal for a wide variety of battery operated devices in computing, industrial, medical, and IoT applications that have extremely tight board space and power constraints while requiring high levels of precision.

High Voltage, Low Power Comparator

General Description MAX40070/MAX40072 is a family of single micropower comparators ideal for a wide variety of battery operated devices in computing, industrial, medical, and IoT applications that have extremely tight board space and power constraints while requiring high levels of precision.

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

Ultra-Low Offset Voltage Operational Amplifier

文件：225.44 Kbytes Page：6 Pages

2.7V to 5.5V Single-Supply Operation

文件：156.73 Kbytes Page：5 Pages

2.5GHz 45dB RF-Detecting Controllers

文件：692.48 Kbytes Page：19 Pages

2.5GHz 45dB RF-Detecting Controllers

文件：692.48 Kbytes Page：19 Pages

1.7V, 0.9μA Comparators with Built-in Reference

文件：955.48 Kbytes Page：14 Pages

-0.2V to VDD 0.2 Input Voltage Range

文件：1.2393 Mbytes Page：7 Pages

1.7V、0.9μA、内置基准的比较器

1.7V, 0.9μA Comparators with Built-in Reference

文件：955.48 Kbytes Page：14 Pages

-0.2V to VDD 0.2 Input Voltage Range

文件：1.2393 Mbytes Page：7 Pages

-0.2V to VDD 0.2 Input Voltage Range

文件：1.2393 Mbytes Page：7 Pages

-0.2V to VDD 0.2 Input Voltage Range

文件：1.2393 Mbytes Page：7 Pages