High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

高精度、76V、高端电流监测，SOT23封装

MAX4007/MAX4008是高精度、高侧、高电压电流监测器，专门设计用于监测光纤应用中光电二极管的电流。它们提供了一路参考电流输出和一路正比于参考电流的监测输出。MAX4007的监测输出是正比于参考电流的电流信号。MAX4008的监测输出是正比于参考电流的电压信号。这些电流监测器具有六个数量级的动态范围，能够以优于5%的精度监测250nA至2.5mA的参考电流。如果精度要求降低一些，这些器件能够监测10nA至10mA范围的光电管电流。\nMAX4007/MAX4008可工作于+2.7V至+76V电源，适用于APD或PIN光电二极管。内部的限流保护(典型20mA)可防止器件因短路至地 • 宽广的参考电流动态范围 \n• 在250nA至2.5mA范围内可保证5%的监测精度 \n• 在10nA至10mA范围内监测精度为10% \n• 监测输出为电流(MAX4007)或电压(MAX4008)信号 \n• 参考电流限流保护(典型20mA) \n• 电压钳位保护后续电路 \n• +2.7V至+76V宽电压范围 \n• 6引脚SOT23封装;

High-Accuracy, 76V, High-Side Current Monitors in SOT23

文件：236.5 Kbytes Page：10 Pages

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier Ordering Information

General Description The MAX40080 is a high-precision, fast-response, bi-directional current-sense amplifier with digital output and a very wide input common-mode range from -0.1V (ground sensing) to 36V. The device features an ultra-low 5μV input offset voltage and a very low 0.2% gain error

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

10MHz/42MHz、低噪声、低偏置电流运算放大器

MAX40075/MAX40088为宽带、低噪声、低输入偏置电流运算放大器，提供轨对轨输出，采用低至2.7V单电源工作。使能时，每个放大器的静态电流只有2.2mA。超低失真(0.0002% THD+N)，以及低输入电压噪声密度(4.2nV/√Hz)和低输入电流噪声密度(0.5fA/√Hz)。低输入偏置电流和低噪声与宽带宽相结合，非常适合互阻放大器和成像应用。\n\n 为节省功耗，MAX40075/MAX40088提供低功耗关断模式，将电源电流降低至0.1μA，将放大器输出置于高阻态。这些放大器具有轨对轨输出，其输入共模电压范围可以低至地电平。MAX40075为单位增益稳定，增 • 低输入电压噪声密度：4.2nV/√Hz @ 30kHz\n• 低输入电流噪声密度：0.5fA/√Hz\n• 低输入偏置电流：OS ≤ 70μV\n• 低功耗关断：供电电流降低至≤1μA\n• 采用节省空间的6-SOT23和6-WLP封装\n• AEC-Q100认证，请参考定购信息;

单/双/四通道超低输入偏置电流、低噪声放大器

MAX40079/MAX40087/MAX40077/MAX40089/MAX40078为宽带、低噪声、低输入偏置电流运算放大器，提供满摆幅输出，采用2.7V至5.5V单电源工作。这些低噪声放大器每个放大器的静态耗流为2.2mA。该家族放大器具有超低失真(0.0002% THD+N)，以及低输入电压噪声密度(4.2nV/√Hz)和低输入电流噪声密度(0.5fA/√Hz)。0.3pA (典型值)低输入偏置电流与低噪声(4.5nV/√Hz)相结合，再加上宽带宽，为互阻(TIA)和成像应用提供优异的性能。\n\n 这些放大器具有满摆幅输出，其输入共模电压范围包括地。MAX40079 • 低输入电压噪声密度：4.2nV/@ 30KHz \n• 低输入电流噪声密度：0.5fA/ \n• 低输入偏置电流：0.3pA (典型值) \n• 低失真：0.00035%或-109dB THD+N (1kΩ负载) \n• 采用+2.7V至+5.5V单电压工作 \n• 输入共模电压范围包括地 \n• 1kΩ负载时满摆幅输出 \n• 宽带宽：MAX 40079/MAX40077/MAX40078 (10MHz)；MAX40087/MAX40089 (42MHz) \n• 优异的直流特性：VOS ≤ 30µV \n• 单通道6焊球WLP封装为1.31mm x 0.73mm，0.35mm焊;

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

Benefits and Features ●Low Input Voltage Noise Density: 4.2nV/√Hz at 30KHz ●Low Input Current Noise Density: 0.5fA/√Hz ●Low Input Bias Current: 0.3pA (typ) ●Low Distortion: 0.00035% or -109dB THD+N (1kΩ Load) ●Single-Supply Operation from +2.7V to +5.5V ●Input Common-Mode Voltage Range I

High-Accuracy, 76V, High-Side Current Monitors in SOT23

General Description The MAX4007/MAX4008 precision, high-side, high-voltage current monitors are specifically designed for monitoring photodiode current in fiber applications. Features ♦ Wide Reference Current Dynamic Range     Guaranteed 250nA to 2.5mA with 5 Monitor Accuracy     Extended 10n

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier

文件：1.04439 Mbytes Page：37 Pages

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier

文件：1.04439 Mbytes Page：37 Pages

Precision, Fast Sample-Rate, Digital Current-Sense Amplifier

文件：1.04439 Mbytes Page：37 Pages

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

文件：1.12638 Mbytes Page：18 Pages

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

文件：1.12638 Mbytes Page：18 Pages

10MHz/42MHz Low Noise, Low Bias Op-Amps

文件：1.5473 Mbytes Page：14 Pages

2.7V to 5.5V Supply Voltage Range across VDD and VSS

文件：627.98 Kbytes Page：7 Pages

包装：盒 描述：EVAL OPAMP 42MHZ MAX40088 开发板，套件，编程器 评估板 - 运算放大器

2.7V to 5.5V Supply Voltage Range Across VDD and VSS

文件：1.52334 Mbytes Page：10 Pages

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

文件：1.12638 Mbytes Page：18 Pages

Single/Dual/Quad Ultra-Low Input Bias Current, Low-Noise Amplifiers

文件：1.12638 Mbytes Page：18 Pages

2.7V to 5.5V Supply Voltage Range Across VDD and VSS

文件：1.52334 Mbytes Page：10 Pages

包装：盒 描述：EVAL MAX40089 LOW NOISE AMP 开发板，套件，编程器 评估板 - 运算放大器

2.7V to 5.5V Supply Voltage Range Across VDD and VSS

文件：1.52334 Mbytes Page：10 Pages

High-Accuracy, 76V, High-Side Current Monitors in SOT23

文件：236.5 Kbytes Page：10 Pages

4-BIT FULL ADDER WITH PARALLEL CARRY OUTPUT

DESCRIPTION The HCC4008B (extended temperature range) and HCF4008B (intermediate temperature range) are monolithic integrated circuits, available in 16-lead dual in-line plastic or ceramic package and plastic micropackage. ■ 4 SUM OUTPUTS PLUS PARALLEL LOOKAHERD CARRY-OUTPUT ■ HIGH-SPEED OPERAT

4-bit binary full adder

DESCRIPTION The HEF4008B is a 4-bit binary full adder with two 4-bit data inputs (A0 to A3, B0 to B3), a carry input (CIN), four sum outputs (S0 to S3), and a carry output (COUT). The IC uses full look-ahead across 4-bits to generate COUT. This minimizes the necessity for extensive look-ahead a

4-bit binary full adder

DESCRIPTION The HEF4008B is a 4-bit binary full adder with two 4-bit data inputs (A0 to A3, B0 to B3), a carry input (CIN), four sum outputs (S0 to S3), and a carry output (COUT). The IC uses full look-ahead across 4-bits to generate COUT. This minimizes the necessity for extensive look-ahead a

4-bit binary full adder

DESCRIPTION The HEF4008B is a 4-bit binary full adder with two 4-bit data inputs (A0 to A3, B0 to B3), a carry input (CIN), four sum outputs (S0 to S3), and a carry output (COUT). The IC uses full look-ahead across 4-bits to generate COUT. This minimizes the necessity for extensive look-ahead a

4-bit binary full adder

DESCRIPTION The HEF4008B is a 4-bit binary full adder with two 4-bit data inputs (A0 to A3, B0 to B3), a carry input (CIN), four sum outputs (S0 to S3), and a carry output (COUT). The IC uses full look-ahead across 4-bits to generate COUT. This minimizes the necessity for extensive look-ahead a