CR-15 Package Handling and Mounting Procedure

CR-15 Package Handling and Mounting Procedure

文件：341.72 Kbytes Page：2 Pages

F2F Magnetic Stripe Encoding Card Reader

Description The M56710FP is a semiconductor integrated circuit of Bi-CMOS structure having an F2F demodulator function for magnetic card reader. Features • Low current dissipation (0.7 mA when on standby as a standard) • Provided with glance-over selection input (4, 8, and 16 bits) • Provided

F2F MAGNETIC STRIPE ENCORDING CARD READER

DESCRIPTION The M56710FP is a semiconductor integrated circuit of BiCMOS structure having an F2F demodulator function for magnetic card reader. FEATURES ● Low current dissipation (0.7mA when on standby as a standard) ● Provided with glance-over selection input (4, 8, and 16 bits) ● Provided w

3-PHASE BRUSHLESS MOTOR CONTROL

DESCRIPTION The M56733AFP is a semiconductor integrated circuit designed as a single chip controller for the FDD spindle motor. The IC is equipped with a power amplifier, hole amplifier, FG amplifier, oscillator, speed discriminator, and various types of protection circuits. Equipped with MOD pin

3-PHASE BRUSHLESS MOTOR CONTROL

DESCRIPTION The M56733AFP is a semiconductor integrated circuit designed as a single chip controller for the FDD spindle motor. The IC is equipped with a power amplifier, hole amplifier, FG amplifier, oscillator, speed discriminator, and various types of protection circuits. Equipped with MOD pin

3-PHASE BRUSHLESS MOTOR CONTROL

DESCRIPTION The M56733AFP is a semiconductor integrated circuit designed as a single chip controller for the FDD spindle motor. The IC is equipped with a power amplifier, hole amplifier, FG amplifier, oscillator, speed discriminator, and various types of protection circuits. Equipped with MOD pin

3-Phase Brushless Motor Driver

Description The M56733AFP is a semiconductor integrated circuit designed as a single-chip controller for FDD spindle motors. It incorporates a power amplifier, Hall amplifier, FG amplifier, oscillator, and speed discriminator, along with various protective circuits. Control of switching between

SPINDLE MOTOR DRIVER

DESCRIPTION The M56745FP is a semiconductor integrated circuit designed for a single chip controller for CD-ROM spindle motor. M56745FP has a both (forward and reverse) motor rotation control by the motor speed control terminal. Also, this device includes a bias circuit for Hall Sensor, a cu

4-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56748FP is a semiconductor IC developed as the motor driver used to CD player, CD-ROM. This circuit includes Standby circuit, TSD circuit and 4-Channel BTL Driver that is able to drive four actuator with one IC. FEATURES ● Low Output saturation voltage (typ:1.35V,at 0.5A) ● L

4 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56749FP is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4 channel actuators by 1 chip due to include 4 channel BTL drivers. Also, this device include a mute circuit, a Vcc check circuit and TSD function. FEATURES ● Lower sa

4 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56749FP is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4 channel actuators by 1 chip due to include 4 channel BTL drivers. Also, this device include a mute circuit, a Vcc check circuit and TSD function. FEATURES ● Lower sa

3-PHASE BRUSHLESS MOTOR DRIVER

Outline M56750FP is a 3 phase brushless motor driver that include charge pump circuit, which is inputted a acceleration and deceleration pulse signal from a external discriminator circuit. The pulse width is converted to the voltage by the above charge pump circuit and a external filter. And, t

2-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56753FP is a semiconductor IC developed as the motor driver used DVD, DVD-ROM, CD-ROM and CD Player. This device include 2 channel BTL drivers and can drive 2 actuators with one IC at the same time. Also, the mute circuit, thermal protection circuit and VREF voltage monitor cir

4-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56754SP is a semiconductor IC developed as the motor driver used for CD-ROM and CD player. This circuit includes 4-Channel BTL Driver that is able to drive four actuator with one IC. FEATURES ●Low Output saturation voltage(typ:1.35V at 0.5A) ●Large operating supply voltage ra

4-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56754SP is a semiconductor IC developed as the motor driver used for CD-ROM and CD player. This circuit includes 4-Channel BTL Driver that is able to drive four actuator with one IC. FEATURES ●Low Output saturation voltage(typ:1.35V at 0.5A) ●Large operating supply voltage ra

SPINDLE MOTOR DRIVER

DESCRIPTION The M56755AFP is a semiconductor integrated circuit designed for a single chip controller for CD-ROM spindle motor. M56755AFP has a both (forward and reverse) motor torque control by the motor speed control terminal. M56755AFP has the several braking mode that an user can flexibly s

SPINDLE MOTOR DRIVER

DESCRIPTION The M56755FP is a semiconductor integrated circuit designed for a single chip controller for CD-ROM spindle motor. M56755FP has a both (forward and reverse) motor torque control by the motor speed control terminal. FEATURES ●The supply voltage with wide range. (4.5V to 13.2V

5 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56758FP is a semiconductor integrated circuit designed for a actuator driver used for MD, CD-audio, etc. This device can function 5-channel-actuators by 1 chip due to include 5 channel BTL drivers. Sufficient output dynamic range can be obtained by low supply voltage because sat

4-CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56759 is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4-channel-actuators by 1 chip due to include 4 channel BTL drivers. Three channels of this device, ch1, ch2 and ch3 can be controlled by PWM pulse. Two of them, ch1 and ch

4-CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56759 is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4-channel-actuators by 1 chip due to include 4 channel BTL drivers. Three channels of this device, ch1, ch2 and ch3 can be controlled by PWM pulse. Two of them, ch1 and ch

2-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56781FP is a semiconductor IC developed as the motor driver used DVD, DVD-ROM, CD-ROM and CD Player. This device include 2 channel BTL drivers and can drive 2 actuators with one IC at the same time. Also, the mute circuit, thermal protection circuit and VREF voltage monitor cir

4 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56782FP is a semiconductor integrated circuit in order to drive 4ch actuator. FEATURES ● Large power dissipation ● 3.3V DSP available. ● Low saturation voltage. (Typical 1.35V at load current 0.5A and no bootstrap condition.) ● There are two motor power supplies. Vm1

3 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56783AFP is a semiconductor integrated circuit in order to drive 3ch actuator. FEATURES ● 3.3V DSP available. ● Low saturation voltage. ● By taking advantage of the bootstrap function, the saturation voltage can be lower. ● There are two motor power supplies.

3 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56783AFP is a semiconductor integrated circuit in order to drive 3ch actuator. FEATURES ● 3.3V DSP available. ● Low saturation voltage. ● By taking advantage of the bootstrap function, the saturation voltage can be lower. ● There are two motor power supplies.

SPINDLE MOTOR DRIVER

DESCRIPTION The M56784FP is a semiconductor integrated circuit in order to drive the spindle motor. FEATURES ● Large power dissipation (Power Package). ● 3.3V DSP available. ● The supply voltage with wide range. ● High motor drive current. ● Low saturation voltage. (typical 1.2V at load cur

SPINDLE MOTOR DRIVER

DESCRIPTION The M56784FP is a semiconductor integrated circuit in order to drive the spindle motor. FEATURES ● Large power dissipation (Power Package). ● 3.3V DSP available. ● The supply voltage with wide range. ● High motor drive current. ● Low saturation voltage. (typical 1.2V at load cur

SPINDLE MOTOR DRIVER

DESCRIPTION The M56785FP is a semiconductor integrated circuit in order to drive the spindle motor. FEATURES ● Large power dissipation (Power Package). ● 3.3V DSP available. ● The supply voltage with wide range. ● High motor drive current . ● Low saturation voltage. (typical 1.2V at load cu

5 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56788FP is a semiconductor integrated circuit in order 5ch actuator. FEATURES ● Low saturation voltage. ● 3.3V DSP available. ● There are two motor power supplies. Vm1 CH1,2 motor power supply-1 Vm2 CH3,4,5 motor power supply-2 ● Built-in OP amp. for Regulator. (It enables a

5 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56788FP is a semiconductor integrated circuit in order 5ch actuator. FEATURES ● Low saturation voltage. ● 3.3V DSP available. ● There are two motor power supplies. Vm1 CH1,2 motor power supply-1 Vm2 CH3,4,5 motor power supply-2 ● Built-in OP amp. for Regulator. (It enables a

4 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56789FP is a semiconductor integrated circuit in order to drive 4ch actuator. FEATURES ● Large power dissipation (Power Package). ● 3.3V DSP available. ● Low saturation voltage (typical 0.6V at load current 500mA). ● Low cross-over distortion. ● Wide supply voltage range.(4

4 CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56789FP is a semiconductor integrated circuit in order to drive 4ch actuator. FEATURES ● Large power dissipation (Power Package). ● 3.3V DSP available. ● Low saturation voltage (typical 0.6V at load current 500mA). ● Low cross-over distortion. ● Wide supply voltage range.(4

20 (7/28) AWG Tinned Copper

文件：410.49 Kbytes Page：4 Pages

包装：线轴 描述：MULTI-PAIR 10COND 20AWG 500' 电缆，电线 多芯导线

包装：线轴 描述：MULTI-PAIR 10COND 20AWG 100' 电缆，电线 多芯导线

TWTs, Continuous Wave

文件：82.94 Kbytes Page：1 Pages

TWTs, Continuous Wave

文件：62.78 Kbytes Page：1 Pages

TWTs, Continuous Wave

F2F MAGNETIC STRIPE ENCORDING CARD READER

3-PHASE BRUSHLESS MOTOR DRIVER

文件：119.01 Kbytes Page：9 Pages

SERIAL INPUT PLL FREQUENCY SYNTHESIZER FOR VCR

文件：379.74 Kbytes Page：7 Pages

SERIAL INPUT PLL FREQUENCY SYNTHESIZER FOR VCR

文件：379.74 Kbytes Page：7 Pages

SERIAL INPUT PLL FREQUENCY SYNTHESIZER FOR VCR

文件：379.74 Kbytes Page：7 Pages

SPINDLE MOTOR DRIVER

文件：150.4 Kbytes Page：8 Pages

5 CHANNEL ACTUATOR DRIVER

文件：4.64134 Mbytes Page：12 Pages

567 Series IP52 | E-Seal | In-Line Waterproof Connectors | 5.00mm x 5.90mm Pitch

Features 5.0mm x 5.9mm Pitch, Rated Current: 8A max Splashproof Solution available in 1, 2, 3, 4, 6, or 9 positions Available in Wire-to-Wire Options True Crimp and Poke Solution with various sized wire seals available Available with wire already installed Splash Proof Grade IP52 (JIS C0920)

Microprocessor-Compatible 12-Bit D/A Converter

MICROPROCESSOR-Compatible 12-Bit D/A Converter

Microprocessor-Compatible 12-Bit D/A Converter

MICROPROCESSOR-Compatible 12-Bit D/A Converter

HCMOS / TTL Output

文件：134.8 Kbytes Page：2 Pages

CORRECTION TO CASE OUTLINE DIMENSION

文件：508.35 Kbytes Page：12 Pages