Soft, round, 6mm dia, Hard, flat, 12mm wide, Hard, flat, 25mm wide

[VERMASON] Description: The brushes consist of a conductive plastic handle and Thunderon conductive fibres, mixed with animal hair if stiffness is desired. Resistance from the tip of the brush to the handle is less than 5 x 106 ohm. Brushes should be used by operators who are earthed

ZINC ALLOY DIE CAST

文件：33.55 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：32.87 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.36 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.34 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.31 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.33 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.32 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.33 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.37 Kbytes Page：1 Pages

ZINC ALLOY DIE CAST

文件：67.32 Kbytes Page：1 Pages

HOUSING: ZINC ALLOY DIE CAST W/ CHROME PLATING

文件：147.56 Kbytes Page：1 Pages

HOUSING: ZINC ALLOY DIE CAST W/ CHROME PLATING

文件：147.96 Kbytes Page：1 Pages

HOUSING: ZINC ALLOY DIE CAST W/ CHROME PLATING

文件：146.71 Kbytes Page：1 Pages

HOUSING: ZINC ALLOY DIE CAST W/ CHROME PLATING

文件：147.53 Kbytes Page：1 Pages

10 AMPERE DARLINGTON POWER TRANSISTORS COMPLEMENTARY SILICON 60.80 VOLTS 150 WATTS

Medium-Power Complementary Silicon Transistors . . . for use as output devices in complementary general purpose amplifier applications. • High DC Current Gain — hFE = 4000 (Typ) @ IC = 5.0 Adc • Monolithic Construction with Built–in Base–Emitter Shunt Resistors

DARLINGTON POWER TRANSISTOR COMPLEMENTARY SILICON

Medium-Power Complementary Silicon Transistors . . . for use as output devices in complementary general purpose amplifier applications. • High DC Current Gain — hFE = 4000 (Typ) @ IC = 5.0 Adc • Monolithic Construction with Built–in Base–Emitter Shunt Resistors

MICROWAVE POWER TRANSISTORS

The RF Line Microwave Power Transistors . . . designed primarily for large–signal output and driver amplifier stages in the 1.5 to 3.0 GHz frequency range. • Designed for Class B or C, Common Base Linear Power Amplifiers • Specified 28 Volt, 3.0 GHz Characteristics: Output Power — 1.0 to 5

Light Emitting Diode Miniature, Diffused Red

Description: The NTE3001 is a diffused Gallium Arsenide Phosphide diode mounted in a two lead epoxy package with a red diffused lens. On forward bias, this device emits a spectrally narrow band of visible light which peaks at 660nm. The NTE3001 is intended for high volume indicator light app

SDH/SONET STM4/OC12 laser drivers

文件：517.74 Kbytes Page：22 Pages