THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY

DPA Series • 16 Pin DIP SSR • Ratings to 1A @ 280 VAC • SCR output • Voltage or current-control input • Zero-crossing (resistive loads) output

包装：散装 描述：HEATSINK FOR SSR 0-10A 3.3\ 继电器 配件

包装：盒 描述：HEATSINK FOR SSR 0-10A 3.3\ 继电器 配件

Reflective sensors

HS-101 are reflection sensors which aim at the human body detection such as ATM. HS-101 has high resistance to ambient light by using modulated light. HS-101 are installed with a screw and also can be connected very easily with 3 pin connector. FEATURES • Compact • 3pin connector type APPLICAT

Reflective sensors

HS-101S are reflection sensors which aim at the human body detection such as ATM. HS-101S has high resistance to ambient light by using modulated light. HS-101S are installed with a screw and also can be connected very easily with 3 pin connector. FEATURES • Compact • 3pin connector type • Wit

ELEMENTO TÉRMICO PARA LÁPIZ ST-2065D 65W

DESCRIPCIÓN Elemento térmico de cerámica para lápiz ST-2065D de 65W

Radiation Hardened, Ultra High Speed Current Feedback Amplifier

The HS-1100RH is a radiation hardened high speed, wideband, fast settling current feedback amplifier. Built with Intersil’s proprietary, complementary bipolar UHF-1 (DI bonded wafer) process, it is the fastest monolithic amplifier available from any semiconductor manufacturer. These devices are QM

Radiation Hardened, High Speed, Low Power Output Limiting, Closed-Loop-Buffer Amplifier

Description The HS-1115RH is a radiation hardened, high speed closed loop buffer featuring both user programmable gain and output limiting. They are QML approved and processed in full compliance with MIL-PRF-38535. Manufactured in proprietary, complementary bipolar UHF-1 (DI bonded wafer) process

Radiation Hardened, High Speed, Low Power Output Limiting, Closed-Loop-Buffer Amplifier

• Electrically Screened to SMD 5962-96785 • MIL-PRF-38535 Class V Compliant • User Programmable Output Voltage Limiting • User Programmable For Closed-Loop Gains of +1, -1 or +2 Without Use of External Resistors • Standard Operational Amplifier Pinout • Fast Overdrive Recovery. . . . . . . .

Radiation Hardened, Ultra High Speed Current Feedback Amplifier with Offset Adjust

Description The HS-1120RH is a radiation hardened, high speed, wideband, fast settling current feedback amplifier. These devices are QML approved and are processed and screened in full compliance with MIL-PRF-38535. Built with Intersil’ proprietary, complementary bipolar UHF-1 (DI bonded wafer) p

Radiation Hardened, High Speed, Low Power Current Feedback Amplifier with Programmable Output Limiting

The HS-1135RH is a radiation hardened, high speed, low power current feedback amplifier built with Intersil’s proprietary complementary bipolar UHF-1 (DI bonded wafer) process. They are QML approved and processed in full compliance with MIL-PRF-38535. This amplifier features user programmable outp

Radiation Hardened, High Speed, Low Power Current Feedback Amplifier with Programmable Output Limiting

Features ▪ Electrically Screened to SMD #5962-96767 ▪ QML Qualified per MIL-PRF-38535 Requirements ▪ User Programmable Output Voltage Limiting ▪ Fast Overdrive Recovery:

Radiation Hardened, High Speed, Low Power, Current Feedback Video Operational Amplifier with Output Disable

The HS-1145RH is a high speed, low power current feedback amplifier built with Intersil’s proprietary complementary bipolar UHF-1 (DI bonded wafer) process. These devices are QML approved and are processed and screened in full compliance with MIL-PRF-38535. This amplifier features a TTL/CMOS comp

Radiation Hardened, High Speed, Low Power, Current Feedback Video Operational Amplifier with Output Disable

Features ▪ Electrically Screened to SMD # 5962-96830 ▪ QML Qualified per MIL-PRF-38535 Requirements ▪ Low Supply Current: 5.9mA (Typ) ▪ Wide -3dB Bandwidth: 360MHz (Typ) ▪ High Slew Rate: 1000V/μs (Typ) ▪ Excellent Gain Flatness (to 50MHz): ±0.07dB (Typ) ▪ Excellent Differential Gain: 0.02&

Radiation Hardened Adjustable Positive Voltage Regulator

The Radiation Hardened HS-117RH is an adjustable positive voltage linear regulator capable of operating with input voltages up to 40VDC. The output voltage is adjustable from 1.2V to 37V with two external resistors. The device is capable of sourcing from 5mA to 1.25APEAK (0.5 APEAK for the TO-39 p

Radiation Hardened Adjustable Positive Voltage Regulator

Features • Electrically screened to DLA SMD # 5962-99547 • Superior temperature stability • Overcurrent and over-temperature protection • Wide input voltage range . . . . . . . . . . . . . . . . . . 4.25V to 40V • Operating temperature range. . . . . . . . . . . .-55°C to +125°C • QML qualif

Radiation Hardened Adjustable Positive Voltage Regulator

The Radiation Hardened HS-117RH is an adjustable positive voltage linear regulator capable of operating with input voltages up to 40VDC. The output voltage is adjustable from 1.2V to 37V with two external resistors. The device is capable of sourcing from 5mA to 1.25APEAK (0.5 APEAK for the TO-39 p

Radiation Hardened Adjustable Positive Voltage Regulator

Features • Electrically screened to DLA SMD # 5962-99547 • Superior temperature stability • Overcurrent and over-temperature protection • Wide input voltage range . . . . . . . . . . . . . . . . . . 4.25V to 40V • Operating temperature range. . . . . . . . . . . .-55°C to +125°C • QML qualif

Radiation Hardened, Dual, High Speed Low Power, Video Closed Loop Buffer

The HS-1212RH is a dual closed loop buffer featuring user programmable gain and high speed performance. Manufactured on Intersil’s proprietary complementary bipolar UHF-1 (DI bonded wafer) process, this device offers wide -3dB bandwidth of 340MHz, very fast slew rate, excellent gain flatness and h

Radiation Hardened, Dual, High Speed, Low Power Video Operational Amplifier with Output Disable

The HS-1245RH is a radiation hardened dual high speed, low power current feedback amplifier built with Intersil’s proprietary complementary bipolar UHF-1 (DI bonded wafer) process. These devices are QML approved and are processed and screened in full compliance with MIL-PRF-38535. Features • Ele

Radiation Hardened, High Speed, Low Power Dual Operational Amplifier with Disable

Description The HS-1254RH is a ±5V, Rad Hard, monolithic, dual, current feedback amplifier that provides highly reliable performance in harsh radiation environments. Dielectric isolation and bonded wafer processing make this device immune to latch-up (SEL). Features • QML Qualified Per MIL-PRF-

Crystal Clock Oscillator

[NEL] Crystal Clock Oscillator

CMOS Compatible Enable/Disable

Description The HS-A1370 Seriesof quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the HS-A1370units with a logic “0 enables the output on Pin 8. Alternately, supplying pin 1 of the HS-A1380units with a logic “1 enable

Radiation Hardened Quad Voltage Comparator

The Radiation Hardened HS-139RH, HS-139EH consists of four independent single or dual supply voltage comparators on a single monolithic substrate. The common mode input voltage range includes ground, even when operated from a single supply and the low supply current makes these comparators suitabl

Radiation Hardened Quad Voltage Comparator

Features •QML qualified per MIL-PRF-38535 requirements •Radiation environment -Latch-up free under any conditions -Total dose (Max). . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) -SEU LET threshold . . . . . . . . . . . . . . . . . . . 20MeV/cm2/mg -Low dose rate effects immunity

Radiation Hardened Quad Voltage Comparator

• QML qualified per MIL-PRF-38535 requirements • Radiation environment - Latch-up free under any conditions - Total dose (Max). . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU LET threshold . . . . . . . . . . . . . . . . . . . 20MeV/cm2/mg - Low dose rate effects immunity •

Radiation Hardened Quad Voltage Comparator

The Radiation Hardened HS-139RH, HS-139EH consists of four independent single or dual supply voltage comparators on a single monolithic substrate. The common mode input voltage range includes ground, even when operated from a single supply and the low supply current makes these comparators suitabl

Radiation Hardened Quad Voltage Comparator

The Radiation Hardened HS-139RH, HS-139EH consists of four independent single or dual supply voltage comparators on a single monolithic substrate. The common mode input voltage range includes ground, even when operated from a single supply and the low supply current makes these comparators suitabl

Radiation Hardened Quad Voltage Comparator

Features •QML qualified per MIL-PRF-38535 requirements •Radiation environment -Latch-up free under any conditions -Total dose (Max). . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) -SEU LET threshold . . . . . . . . . . . . . . . . . . . 20MeV/cm2/mg -Low dose rate effects immunity

Radiation Hardened Quad Voltage Comparator

• QML qualified per MIL-PRF-38535 requirements • Radiation environment - Latch-up free under any conditions - Total dose (Max). . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU LET threshold . . . . . . . . . . . . . . . . . . . 20MeV/cm2/mg - Low dose rate effects immunity •

Radiation Hardened Quad Voltage Comparator

• QML qualified per MIL-PRF-38535 requirements • Radiation environment - Latch-up free under any conditions - Total dose (Max). . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU LET threshold . . . . . . . . . . . . . . . . . . . 20MeV/cm2/mg - Low dose rate effects immunity •

Radiation Hardened Quad Voltage Comparator

Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of

Radiation Hardened, High Speed, Low Power, Current Feedback Op Amp with Output Disable

Radiation Hardened, High Speed, Low Power, Current Feedback Op Amp with Output Disable The Radiation Hardened HS-1410RH is a high speed, low power current feedback amplifier built with Intersil’s proprietary complementary bipolar UHF-1 (DI, bonded wafer) process. This technology provides an immun

Radiation Hardened, Quad, High Speed, Low Power, Video Closed Loop Buffer

The HS-1412RH is a radiation hardened quad closed loop buffer featuring user programmable gain and high speed performance. Manufactured on Intersil’s proprietary complementary bipolar UHF-1 (DI bonded wafer) process, this device offers wide -3dB bandwidth of 340MHz, very fast slew rate, excellent

Crystal Clock Oscillator

[NEL] Crystal Clock Oscillator

Crystal Clock Oscillator

[NEL] Crystal Clock Oscillator

TTL

Description The HS-1520 Seriesof quartz crystal oscillators provide enable/disable 3-state TTL compatible signals for bus connected systems. Supplying Pin 1 of the HS-1520 units with a logic “1 enables its output on Pin 8. In the disabled mode, Pin 8 presents a high impedance to the load. All u

TTL

Description The HS-160 Seriesof quartz crystal oscillators are general purpose TTL oscillators. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance bo

Single Frequency Oscillator 53.125MHz

Description The HS-160 Seriesof quartz crystal oscillators are general purpose TTL oscillators. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance bo

Radiation Hardened High-Speed, Dual Output PWM

The Radiation Hardened HS-1825ARH, HS-1825AEH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for single-ended boost converter applications. Features • Electrically Screene

Radiation Hardened High-Speed, Dual Output PWM

Features • Electrically screened to DLA SMD # 5962-99558 • QML qualified per MIL-PRF-38535 Requirements • Radiation environment - Maximum total dose . . . . . . . . . . . . . . . . . . . . 300 krad(SI) - Vertical architecture provides low dose rate immunity - DI RSG process provides latch-up

Radiation Hardened High-Speed, Dual Output PWM

The Radiation Hardened HS-1825ARH, HS-1825AEH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for single-ended boost converter applications. Features • Electrically Screene

Radiation Hardened High-Speed, Dual Output PWM

The Radiation Hardened HS-1825ARH, HS-1825AEH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for single-ended boost converter applications. Features • Electrically Screene

Radiation Hardened High-Speed, Dual Output PWM

Features • Electrically screened to DLA SMD # 5962-99558 • QML qualified per MIL-PRF-38535 Requirements • Radiation environment - Maximum total dose . . . . . . . . . . . . . . . . . . . . 300 krad(SI) - Vertical architecture provides low dose rate immunity - DI RSG process provides latch-up

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

• Electrically screened to SMD # 5962-95630 • QML qualified per MIL-PRF-38535 requirements • Pin-to-pin for Intersil’s HS-1840RH and HS-1840/883S • Improved radiation performance - Gamma dose () 3x105RAD(Si) • Improved rDS(ON) Linearity • Improved access time 1.5μs (Max) over temp and post

Rad-Hard 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

• Electrically screened to SMD # 5962-95630 • QML qualified per MIL-PRF-38535 requirements • Pin-to-pin for Intersil’s HS-1840RH and HS-1840/883S • Improved radiation performance - Gamma dose () 3x105RAD(Si) • Improved rDS(ON) Linearity • Improved access time 1.5μs (Max) over temp and post

Radiation Hardened 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection

Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD Total Dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

• Electrically screened to SMD # 5962-95630 • QML qualified per MIL-PRF-38535 requirements • Pin-to-pin for Intersil’s HS-1840RH and HS-1840/883S • Improved radiation performance - Gamma dose () 3x105RAD(Si) • Improved rDS(ON) Linearity • Improved access time 1.5μs (Max) over temp and post

Rad-Hard 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH, HS-1840AEH, HS-1840BRH and HS-1840BEH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They

Rad-Hard 16 Channel BiCMOS Analog Multiplexer with High-Z Analog Input Protection

• Electrically screened to SMD # 5962-95630 • QML qualified per MIL-PRF-38535 requirements • Pin-to-pin for Intersil’s HS-1840RH and HS-1840/883S • Improved radiation performance - Gamma dose () 3x105RAD(Si) • Improved rDS(ON) Linearity • Improved access time 1.5μs (Max) over temp and post

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This

CRYSTAL CLOCK OSCILLATORS Positive ECL (PECL) - Enable/Disable

Description The HS-1870 Series of quartz crystal oscillators provide MECL 10K and 10KH series compatible signals in industry standard four-pin DIP hermetic packages. Systems designers may now specify space-saving, cost-effective packaged PECL oscillators to meet their timing requirements. This