General-Purpose Logics-HD/RD74HC Series

Octal D-type Flip-Flops (with 3-state outputs)

These devices are positive edge triggered flip-flops. The difference between HD74HC564 and HD74HC574 is only that the former has inverting outputs and the latter has noninvertering outputs. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to the Q or outp

Octal D-type Flip-Flops (with 3-state outputs)

文件：143.05 Kbytes Page：12 Pages

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

Octal D-type flip-flop; positive edge-trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT574 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • 3-state non-inverting outputs for bus oriented applications • 8-bit positive edge-triggere

Octal 3-State Noninverting D Flip-Flop

The MC74HC574A is identical in pinout to the LS574. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. Data meeting the set−up time is clocked to the outputs with the rising edge of the Clock. The Output Enable input does no

Octal 3-State Noninverting D Flip-Flop

The MC74HC574A is identical in pinout to the LS574. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. Data meeting the set−up time is clocked to the outputs with the rising edge of the Clock. The Output Enable input does no

Octal 3-State Noninverting D Flip-Flop

The MC74HC574A is identical in pinout to the LS574. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. Data meeting the set−up time is clocked to the outputs with the rising edge of the Clock. The Output Enable input does no