ESD array with low capacitance

Description The ESDALC6-4N4 is monolithic array designed to protect up to 4 lines against ESD transients. It has been designed specifically for the protection of the high speed interface of integrated circuits in portable equipment and miniaturized electronics devices. The µQFN-4L package minimiz

Single line low capacitance TRANSIL??for ESD protection

Description The ESDALC6V1-1BM2 is a bidirectional single line TVS diode designed to protect the datalines or other I/O ports against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ Single line low c

1-Line Bi-directional TVS Diode

Features Ultra small package: 1.0x0.6x0.5mm Ultra low capacitance: 15pF typical Ultra low leakage: nA level Low operating voltage: 5V Low clamping voltage 2-pin leadless package Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge:

I-Line Bi-directional TVS Diode

Features ® Ultra low capacitance: 15pF typical ® Ultra low leakage: nA level ® Low operating voltage: +5V ® Low clamping voltage ® 2-pin leadless package © Complies with following standards: © - IEC 61000-4-2 (ESD) immunity test Air discharge: £30kV Contact discharge: £30kV ~IEC61000-4-5

Single line low capacitance TRANSIL??for ESD protection

Description The ESDALC6V1-1BT2 is a bidirectional single line TVS diode designed to protect the datalines or other I/O ports against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ 1 line low capacitance T

Single-line low capacitance Transil??for bidirectional ESD protection

Description The ESDALC6V1-1BU2 is a bidirectional single line TVS diode designed to protect data lines or other I/O ports against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ Breakdown voltage VBR = 6.1

1- Line Bi-directional TVS Diode

Features Ultra low leakage: nA level Operating voltage: 5V Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: 8kV RoHS Compliant Low Clamping Voltage – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 5A (8/20μs) A

Single line low capacitance Transil for ESD protection

Description The ESDALC6V1-1M2 is a unidirectional single line TVS diode designed to protect the data lines or other I/O ports against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ Single line low capacit

UNIDIRECTIONAL TVS DIODE

Features Ultra low leakage: nA level Operating voltage: 5V Low clamping voltage Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-4 (EFT) 40A (5/50ns) –IEC61000-4-5 (Lightning) 7.5A (8/20 μs) R o H S Complian

Single-line low capacitance Transil for ESD protection

Description The ESDALC6V1-1U2 is a unidirectional single line TVS diode designed to protect the data lines or other I/O ports against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ Breakdown voltage VBR =

4 and 5 line low capacitance TRANSIL array for ESD protection

Description The ESDALC6V1xxM6 are monolithic arrays designed to protect up to 4 or 5 lines against ESD transients. The device is ideal for applications where both reduced print circuit board space and power absorption capability are required. Features ■ High ESD protection level ■ High integr

ESD protection for high speed interface

Description The ESDALC6V1-5P6 is a monolithic array designed to protect up to 5 lines against ESD transients. The device is ideal for high speed interface applications where both reduced printed circuit board space and power absorption capability are required. Features ■ Diode array topology

Low Capacitance TVS Diode Array

Features | « Low operating voltage: 5V Ultra low capacitance: 0.5pF typical (/O to GND) o Ultra low leakage: nA level | Low clamping voltage » “IEC 61000-4-2 (ESD) immunity test | Air discharge: £20kV Contact discharge: +15kV -IEC61000-4-4 (EFT) 40A (5/505) | -IEC61000-4-5(Lightning):3.

Low capacitance Transil arrays for ESD protection

Description The ESDALC6V1-5T6 is monolithic arrays designed to protect up to 5 lines against ESD transients. The device is ideal for applications where both reduced print circuit board space and high ESD protection level are required. Features ■ 5 unidirectional Transil diodes ■ Breakdo

Quad low capacitance TRANSIL array for ESD protection

Description The ESDALC6V1C2 is a monolithic array designed to protect up to 4 lines againast ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ 4 unidirectional TRANSIL functions. ■ Breakdown voltage VBR = 6.

Quad low capacitance Transil array for ESD protection

Description The ESDALC6V1F2 is a monolithic array designed to protect up to 4 lines againast ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ 4 unidirectional Transil functions. ■ Breakdown voltage VBR = 6.

Dual low capacitance TRANSIL??array for ESD protection

Description The ESDALC6V1M3 is a monolithic array designed to protect 1 line or 2 lines against ESD transients. The device is ideal for applications where both reduced line capacitance and board space saving are required. Features ■ 2 unidirectional, low capacitance Transil diodes ■ Better th

4 and 5 line low capacitance TRANSIL array for ESD protection

Description The ESDALC6V1xxM6 are monolithic arrays designed to protect up to 4 or 5 lines against ESD transients. The device is ideal for applications where both reduced print circuit board space and power absorption capability are required. Features ■ High ESD protection level ■ High integr

ASD (Application Specific Devices) Low capacitance TRANSIL??arrays for ESD protection

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

QUAD LOW CAPACITANCE TRANSIL ARRAY FOR ESD PROTECTION

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

ASD (Application Specific Devices) Low capacitance TRANSIL??arrays for ESD protection

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

LOW CAPACITANCE TVS DIODE ARRAY

Features Ultra low leakage: nA level Operating voltage: 5V Low clamping voltage Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) RoHS Compliant – IEC61000-4-5 (Lightning) 5A (8/20μs) A

Low Capacitance TVS Diode Array

Features « Low operating voltage: 5V/ « Ultra low capacitance: 0 . 3 pF typical (I/O to 0) Ultra low leakage: nA level « Low clamping voltage » -IEC 61000-4-2 (ESD) immunity test Air discharge: £20kV Contact discharge: +15kV -IEC61000-4-4 (EFT) 40A (5/50ns) -IEC61000-4-5(Lightning):4.0A

QUAD LOW CAPACITANCE TRANSIL TM ARRAY FOR ESD PROTECTION

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

ASD (Application Specific Devices) Low capacitance TRANSIL??arrays for ESD protection

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

ASD (Application Specific Devices) Low capacitance TRANSIL??arrays for ESD protection

Description The ESDALC6V1Px are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients and to a diode drop below ground for negative transients.

QUAD TRANSIL??ARRAY FOR ESD PROTECTION

Description The ESDALCxxxWx are monolithic suppressors designed to protect components connected to data and transmission lines against ESD. These devices clamp the voltage just above the logic level supply for positive transients, and to a diode drop below ground for negative transients. Featur

Low Capacitance Q uad Array for ESD Protection

Features Ultra low leakage: nA level Operating voltage: 5V Low clamping voltage Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±25kV – IEC61000-4-5 (Lightning) 6A (8/20μs) RoHS Compliant Applications Computers Printe

封装/外壳：SOD-882 包装：卷带（TR） 描述：TVS DIODE 3VWM SOD882 电路保护 TVS - 二极管

Single line low capacitance Transil for ESD protection

文件：178.32 Kbytes Page：10 Pages

Single line low capacitance Transil for ESD protection

文件：178.32 Kbytes Page：10 Pages

TPA2025D1 Audio Power Amplifier Evaluation Module

文件：343.31 Kbytes Page：12 Pages

封装/外壳：SOD-882 包装：卷带（TR） 描述：TVS DIODE 3VWM SOD882 电路保护 TVS - 二极管

4- and 5-line low capacitance Transil arrays for ESD protection

文件：213.06 Kbytes Page：11 Pages

Dual low capacitance Transil array for ESD protection

文件：334.68 Kbytes Page：7 Pages

Dual low capacitance Transil array for ESD protection

文件：334.68 Kbytes Page：7 Pages

4- and 5-line low capacitance Transil arrays for ESD protection

文件：213.06 Kbytes Page：11 Pages

4- and 5-line low capacitance Transil arrays for ESD protection

文件：213.06 Kbytes Page：11 Pages

Low capacitance Transil??arrays for ESD protection

文件：233.87 Kbytes Page：9 Pages

Low capacitance Transil??arrays for ESD protection

文件：233.87 Kbytes Page：9 Pages

Quad TRANSIL array for data protection

文件：89.13 Kbytes Page：7 Pages

Quad TRANSIL array for data protection

文件：89.13 Kbytes Page：7 Pages