USB 3.0 Host Controller

2 Features  Host Interface - Compliant with the PCI Express Base Specification Revision 2.0 - Supports the PCI Bus Power Management Interface Specification Revision 1.2 - Supports the SPI/I2C type ROM/flash - System clock uses either 25MHz crystal or external clock - 3.3V for I/O power and

PCIe Gen2 to Universal Serial Bus 3.0 host controller

The EJ168A is a PCIe Gen2 to Universal Serial Bus 3.0 host controller, which complies with PCIe Gen2 specification, USB3.0 specification and eXtensible Host Controller Interface (xHCI) 1.0.\nThe EJ168A has a PCIe Gen2 x1 lane for the PC host system and two USB3.0 downstream ports, which provide Supe Host Interface\n• Compliant with the PCI Express Base Specification Revision 2.0\n• Supports the PCI Bus Power Management Interface Specification Revision 1.2\n• Supports the SPI/I2C type ROM/flash\n• System clock uses either 25MHz crystal or external clock\n• 3.3V for I/O power and 1.2V for core po;

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

1 AMPERE SCHOTTKY BARRIER RECTIFIERS(VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere)

VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● 1 ampere operation at TA=75 ¢J with no thermal runaway ● Exceeds environmental standards of MIL-S-1