Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

20-bit bus-interface D-type flip-flop; positive-edge trigger 3-State

DESCRIPTION The 74ABT16821A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. FEATURES • 20-bit positive-edge triggered register • Multiple VCC and GND pins minimize switching noise • Live insertion/extraction permitte

20-bit bus-interface D-type flip-flop; positive-edge trigger 3-State

DESCRIPTION The 74ABT16821A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. FEATURES • 20-bit positive-edge triggered register • Multiple VCC and GND pins minimize switching noise • Live insertion/extraction permitte

18-bit bus interface D-type flip-flop with reset and enable 3-State

DESCRIPTION The 74ABT16823A 18-bit bus interface register is designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider data/address paths of buses carrying parity. FEATURES • Two sets of high speed parallel registers with positive edge

18-bit bus interface D-type flip-flop with reset and enable 3-State

DESCRIPTION The 74ABT16823A 18-bit bus interface register is designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider data/address paths of buses carrying parity. FEATURES • Two sets of high speed parallel registers with positive edge

20-bit buffer/line driver, non-inverting 3-State

DESCRIPTION The 74ABT16827A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. FEATURES • Multiple VCC and GND pins minimize switching noise • Live insertion/extraction permitted • 3-State output buffers • Power-up 3-S

20-bit buffer/line driver, non-inverting 3-State

DESCRIPTION The 74ABT16827A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. FEATURES • Multiple VCC and GND pins minimize switching noise • Live insertion/extraction permitted • 3-State output buffers • Power-up 3-S

20-bit bus interface latch 3-State

DESCRIPTION The 74ABT16841A Bus interface latch is designed to provide extra data width for wider data/address paths of buses carrying parity. FEATURES • High speed parallel latches • Live insertion/extraction permitted • Extra data width for wide address/data paths or buses carrying parity

20-bit bus interface latch 3-State

DESCRIPTION The 74ABT16841A Bus interface latch is designed to provide extra data width for wider data/address paths of buses carrying parity. FEATURES • High speed parallel latches • Live insertion/extraction permitted • Extra data width for wide address/data paths or buses carrying parity

18-bit latched transceiver with 16-bit parity generator/checker 3-State

DESCRIPTION The 74ABT/H16899 is a 16-bit to 16-bit parity transceiver with separate transparent latches for the A bus and B bus. Either bus can generate or check parity. The parity bit can be fed-through with no change or the generated parity can be substituted with the SEL input. FEATURES • Sy

18-bit latched transceiver with 16-bit parity generator/checker 3-State

DESCRIPTION The 74ABT/H16899 is a 16-bit to 16-bit parity transceiver with separate transparent latches for the A bus and B bus. Either bus can generate or check parity. The parity bit can be fed-through with no change or the generated parity can be substituted with the SEL input. FEATURES • Sy

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

SCRs

Planar passivated Silicon Controlled Rectifier with sensitive gate in a SOT54 (TO-92) plastic package. This SCR is designed to be interfaced directly to microcontrollers, logic ICs and other low power gate trigger circuits. • Guaranteed minimum gate trigger current limit\n• Planar passivated for voltage ruggedness and reliability\n• Sensitive gate\n• Direct triggering from low power gate circuits and logic ICs;

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. These devices may be interfaced direc

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors; logic level for RCD/GFI/LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

Thyristors logic level for RCD/ GFI/ LCCB applications

GENERAL DESCRIPTION Glass passivated, sensitive gate thyristors in a plastic envelope suitable for surface mounting, intended for use in Residual Current Devices/ Ground Fault Interrupters/Leakage Current Circuit Breakers (RCD/ GFI/ LCCB) applications where a minimum IGTlimit is needed. Thes

SCR

文件：263.83 Kbytes Page：13 Pages

SCR

文件：263.73 Kbytes Page：13 Pages

封装/外壳：TO-226-3，TO-92-3（TO-226AA）成形引线 包装：管件 描述：SCR 600V 800MA TO92-3 分立半导体产品 晶闸管 - SCR

SCR

文件：228.48 Kbytes Page：15 Pages

封装/外壳：TO-261-4，TO-261AA 包装：管件 描述：SCR 600V 1A SC73 分立半导体产品 晶闸管 - SCR

SCR

文件：223.56 Kbytes Page：14 Pages

Fast commutation performance for higher frequency operation

文件：218.79 Kbytes Page：13 Pages

1 AMPERE SCHOTTKY BARRIER RECTIFIERS(VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere)

VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● 1 ampere operation at TA=75 ¢J with no thermal runaway ● Exceeds environmental standards of MIL-S-1