Single & Dual Output Miniature, 1W SIP DC/DC Converters

文件：200.56 Kbytes Page：2 Pages

Optical Liquid Level Sensors

文件：188.75 Kbytes Page：1 Pages

CATV/MATV/Satellite Splitter (Indoor)

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail Models D1030S, D1030D

Features SIL 2 according to to IEC 61508:2010 (Route 2H) with Tproof = 5 / 10 years (≤10 / >10 of total SIF). SC2: Systematic Capability SIL2. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Two SPDT Relay Outpu

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail Models D1031D, D1031Q

Features SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 7 / 10 years (≤10 / >10 of total SIF). SC2: Systematic Capability SIL2. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four opto isolated volt

METAL GATE RF SILICON FET

GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 10W – 28V – 1GHz SINGLE ENDED FEATURES • SIMPLIFIED AMPLIFIER DESIGN • SUITABLE FOR BROAD BAND APPLICATIONS • VERY LOW Crss • SIMPLE BIAS CIRCUITS • LOW NOISE • HIGH GAIN – 13 dB MINIMUM APPLICATIONS • HF/VHF/UHF COMM

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail Models D1031D, D1031Q

Features SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 7 / 10 years (≤10 / >10 of total SIF). SC2: Systematic Capability SIL2. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four opto isolated volt

SIL 2 Switch/Proximity Detector Repeater Transistor Output DIN-Rail Models D1031D, D1031Q

Features SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 7 / 10 years (≤10 / >10 of total SIF). SC2: Systematic Capability SIL2. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four opto isolated volt

METAL GATE RF SILICON FET

GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 10W – 28V – 1GHz SINGLE ENDED FEATURES • SIMPLIFIED AMPLIFIER DESIGN • SUITABLE FOR BROAD BAND APPLICATIONS • VERY LOW Crss • SIMPLE BIAS CIRCUITS • LOW NOISE • HIGH GAIN – 13 dB MINIMUM APPLICATIONS • HF/VHF/UHF COMM

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail Models D1032D, D1032Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 3 /10 years (≤10 / >10 of total SIF). PFDavg (1 year) 2.55 E-04, SFF 71.24 . SIL 3 Systematic capability. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector In

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail Models D1032D, D1032Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 3 /10 years (≤10 / >10 of total SIF). PFDavg (1 year) 2.55 E-04, SFF 71.24 . SIL 3 Systematic capability. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector In

SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail Models D1032D, D1032Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 3 /10 years (≤10 / >10 of total SIF). PFDavg (1 year) 2.55 E-04, SFF 71.24 . SIL 3 Systematic capability. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector In

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 2 Switch/Proximity Detector SIL 2 Switch/Proximity Detector Models D1033D, D1033Q

Features: SIL 2 according to IEC 61508:2010 Ed.2 for Tproof = 6 / 10 years (≤10 / >10 of total SIF). PFDavg (1 year) 1.54 E-04, SFF 75.41 . SIL 3 Systematic capability Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. NO/NC contact/proximity Detector Input. Four

SIL 3 Switch/Proximity Detector Interface DIN-Rail Models D1034S, D1034D

Features: SIL 3 according to IEC 61508 Tproof = 1 / 2 years (10 / 20 of total SIF). SIL 2 according to IEC 61508 Tproof = 10 years (10 of total SIF). PFDavg (1 year) 8.41 E-05, SFF 93.24 . fully independent channels. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Divisi

SIL 3 Switch/Proximity Detector Interface DIN-Rail Models D1034S, D1034D

Features: SIL 3 according to IEC 61508 Tproof = 1 / 2 years (10 / 20 of total SIF). SIL 2 according to IEC 61508 Tproof = 10 years (10 of total SIF). PFDavg (1 year) 8.41 E-05, SFF 93.24 . fully independent channels. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Divisi

SIL 3 Switch/Proximity Detector Interface DIN-Rail Models D1034S, D1034D

Features: SIL 3 according to IEC 61508 Tproof = 1 / 2 years (10 / 20 of total SIF). SIL 2 according to IEC 61508 Tproof = 10 years (10 of total SIF). PFDavg (1 year) 8.41 E-05, SFF 93.24 . fully independent channels. Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Divisi

Frequency-Pulse Isolating Repeater DIN-Rail Model D1035S

Features: Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Magnetic pick-up or proximity input sensor. Input frequency range from 0 to 50 KHz. Three port isolation, Input/Output/Supply. EMC Compatibility to EN61000-6-2, EN61000-6-4. In-field programmability by DI

Frequency-Pulse Isolating Repeater DIN-Rail Model D1035S

Features: Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2. Magnetic pick-up or proximity input sensor. Input frequency range from 0 to 50 KHz. Three port isolation, Input/Output/Supply. EMC Compatibility to EN61000-6-2, EN61000-6-4. In-field programmability by DI

Low Cost, 1W SIP Single & Dual Output DC/DC Converters

Low Cost, 1W SIP Single & Dual Output DC/DC Converters Key Features: •1W Output Power •Miniature SIP Case •UL Approved (File E245422) •Single & Dual Outputs •1,000 VDC Isolation •>3.5 MHour MTBF •24 Standard Models • LOWEST COST!!

Very Low Cost, 1W SIP Dual Isolated Output DC/DC Converters

Very Low Cost, 1W SIP Dual Isolated Output DC/DC Converters Key Features: •1W Output Power •Miniature SIP Case •UL Approved (File E245422) •Dual Isolated Outputs •1,000 VDC Isolation •>3.5 MHour MTBF •12 Standard Models •Industry Standard Pin-Out • LOWEST COST!!

Low Cost, Miniature SIP 1W, Very High Isolation DC/DC Converters

Low Cost, Miniature SIP 1W, Very High Isolation DC/DC Converters Key Features: •1W Output Power •6,000 VDC Isolation •7 Pin SIP Case •5V and 12V Inputs •Single & Dual Outputs •16 Standard Models •3.5 MH MTBF • LOWEST COST!!

Low Cost, 1W SIP High Isolation DC/DC Converters

Low Cost, 1W High Isolation SIP DC/DC Converters Key Features: ● 1W Output Power ● 3,000 VDC Isolation ● Miniature SIP Case ● Single & Dual Outputs ● >1 MHour MTBF ● 24 Standard Models ● LOWEST COST!!

Low Cost, 1W High Isolation SIP DC/DC Converters

[MPD] Low Cost, 1W High Isolation SIP DC/DC Converters Key Features: ● 1W Output Power ● 3,000 VDC Isolation ● Miniature SIP Case ● Single & Dual Outputs ● >1 MHour MTBF ● 24 Standard Models ● LOWEST COST!!

Low Cost, 1W SIP Tightly Regulated DC/DC Con vert ers

Low Cost, 1W SIP Tightly Regulated DC/DC Converters Key Features: •1W Output Power •Tightly Regulated •Single & Dual Outputs •Miniature SIP Case •1,000 VDC Isolation •>3.5 MHour MTBF •24 Standard Models •Industry Standard Pin-Out •LOWEST COST!!

Low Cost, Miniature 1W SIP, Wide Input DC/DC Converters

Low Cost, Miniature 1W SIP, Wide Input DC/DC Converters Key Features: •1W Output Power •2:1 Input Voltage Range •1,500 VDC Isolation •Short Circuit Protected •Miniature SIP Case •Single & Dual Outputs •1.0 MH MTBF •Industry Standard Pin-Out • Low Low Cost!!

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Mica Capacitors, Standard Dipped

Stability and mica go hand-in-hand when you need to count on stable capacitance over a wide temperature range. CDE’s standard dipped silvered mica capacitors are the frst choice for timing and close tolerance applications. These standard types are widely available through distribution. Highli

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

D Series

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit

Ceramic Disc Capacitors Class 1 and 2, 100 VDC, General Purpose

FEATURES • Low losses • High stability • High capacitance in small size • Kinked (preferred) or straight leads • Compliant to RoHS directive 2002/95/EC APPLICATIONS • Bypassing • Coupling • Resonant circuit