CMOS 14 Stage Ripple-Carry Binary Counter/Divider and Oscillator

Description CD4060BMS consists of an oscillator section and 14 ripple carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A RESET input is provided which resets the counter to the all O’s state and disables the oscillator. A high

14-Stage Ripple Carry Binary Counters

General Description The CD4020BM/CD4020BC, CD4060BM/CD4060BC are 14-stage ripple carry binary counters, and the CD4040BM/CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero sta

14-Stage Ripple Carry Binary Counters

General Description The CD4020BM/CD4020BC, CD4060BM/CD4060BC are 14-stage ripple carry binary counters, and the CD4040BM/CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero sta

14-Stage Ripple Carry Binary Counters . 12-Stage Ripple Carry Binary Counters . 14-Stage Ripple Carry Binary Counters

General Description The CD4020BC, CD4060BC are 14-stage ripple carry binary counters, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the re

14-Stage Ripple Carry Binary Counters . 12-Stage Ripple Carry Binary Counters . 14-Stage Ripple Carry Binary Counters

General Description The CD4020BC, CD4060BC are 14-stage ripple carry binary counters, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the re

14-Stage Ripple Carry Binary Counters . 12-Stage Ripple Carry Binary Counters . 14-Stage Ripple Carry Binary Counters

General Description The CD4020BC, CD4060BC are 14-stage ripple carry binary counters, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the re

14-Stage Ripple Carry Binary Counters

General Description The CD4020BM/CD4020BC, CD4060BM/CD4060BC are 14-stage ripple carry binary counters, and the CD4040BM/CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero sta

CMOS 14 Stage Ripple-Carry Binary Counter/Divider and Oscillator

Description CD4060BMS consists of an oscillator section and 14 ripple carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A RESET input is provided which resets the counter to the all O’s state and disables the oscillator. A high

CMOS 14 Stage Ripple-Carry Binary Counter/Divider and Oscillator

Features • High Voltage Type (20V Rating) • Common Reset • 12MHz Clock Rate at 15V • Fully Static Operation • Buffered Inputs and Outputs • Schmitt Trigger Input Pulse Line • Standardized, Symmetrical Output Characteristics • 100 Tested for Quiescent Current at 20V • 5V, 10V and 15V Param

CMOS 4-Bit Magnitude Comparator

Description CD4063BMS is a 4-bit magnitude comparator designed for use in computer and logic applications that require the comparison of two 4-bit words. This logic circuit determines whether one 4-bit word (Binary or BCD) is “less than”, “equal to”, or “greater than” a second 4-bit word.

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features • High Voltage Type (20V Rating) • Expansion to 8, 12, 16 . . . 4N Bits by Cascading Units • Medium Speed Operation - Compares Two 4-Bit Words in 250ns (Typ.) at 10V • 100 Tested for Quiescent Current at 20V • Standardized Symmetrical Output Characteristics • 5V, 10V and 15V Parame

CMOS 4-Bit Magnitude Comparator

Description CD4063BMS is a 4-bit magnitude comparator designed for use in computer and logic applications that require the comparison of two 4-bit words. This logic circuit determines whether one 4-bit word (Binary or BCD) is “less than”, “equal to”, or “greater than” a second 4-bit word.

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

CMOS 4-Bit Magnitude Comparator

Features: Expansion to 8, 12, 16....4N bits by cascading units Medium-speed operation: compares two 4-bit words in 250 ns (typ.) at 10 V 100% tested for quiescent current at 20 V Standardized symmetrical output characteristics 5.V, 10-V, and 15-V parametric ratings = Maximum input

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

CMOS 4-Bit Magnitude Comparator

Description CD4066BMS is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with CD4016B, but exhibits a much lower on state resistance. In addition, the on-state resistance is relatively constant over the full input si

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

CMOS 4-Bit Magnitude Comparator

Description CD4066BMS is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with CD4016B, but exhibits a much lower on state resistance. In addition, the on-state resistance is relatively constant over the full input si

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

CD40x7B CMOS Analog Multiplexers or Demultiplexers

1 Features • High-voltage types (20V rating) – CD4067B – single 16-channel multiplexer or demultiplexer • Low ON resistance: 125Ω (typ) over 15Vp-p signalinput range for VDD–VSS = 15V • High OFF resistance: channel leakage of ±10pA (typ) at VDD – VSS = 10V • Matched switch characteristics:

COUNTER/DIVIDER AND OSCILLATOR 14-STAGE RIPPLE CARRY BINARY

14-Bit Binary Counter and Oscillator

14-Bit Binary Counter and Oscillator

14-Bit Binary Counter and Oscillator

FOURTEEN STAGE COUNTER AND OSCILLATOR