QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

CMOS 4-Bit Magnitude Comparator

Description CD4066BMS is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with CD4016B, but exhibits a much lower on state resistance. In addition, the on-state resistance is relatively constant over the full input si

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

CMOS Quad Bilateral Switch

Description\nCD4066BMS is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with CD4016B, but exhibits a much lower on state resistance. In addition, the on-state resistance is relatively constant over the full input sign • For Transmission or Multiplexing of Analog or Digital Signals\n• High Voltage Types (20V Rating)\n• 15V Digital or±7.5V Peak-to-Peak Switching\n• 125ΩTypical On-State Resistance for 15V Operation\n• Switch On-State Resistance Matched to Within 5Ω Over 15V Signal Input Range\n• On-State Resistance ;

4路双向开关

The CD4066 provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off.The CD4066 is pin compatible with the CD4016 but exhibits a much lower ON resistanc • Wide supply voltage range from 3V to 9V\n• Fully static operation\n• 5V and 9V parametric ratings\n• Standardized symmetrical output characteristics\n• Inputs and outputs are protected against electrostatic effects\n• Specified from -40℃ to +125℃\n• Packaging information: DIP14/SOP14/TSSOP14;

4路双向开关，Quad Bilateral Switches

CMOS QUAD BILATERAL SWITCH

文件：547.5 Kbytes Page：20 Pages

two-way analog switch

文件：826.38 Kbytes Page：10 Pages

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

丝印代码：CD4066BQ；CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

丝印代码：CD4066BQ；CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

丝印代码：CD4066BE；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BE；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BF；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BF3A；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BM；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BM；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BM；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BM；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066BM；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066B；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

丝印代码：CD4066B；CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. Featur

Quad Bilateral Switch

General Description The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

CMOS 4-Bit Magnitude Comparator

Description CD4066BMS is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin for pin compatible with CD4016B, but exhibits a much lower on state resistance. In addition, the on-state resistance is relatively constant over the full input si

CMOS QUAD BILATERAL SWITCH

1FEATURES • Qualified for Automotive Applications • 15-V Digital or ±7.5-V Peak-to-Peak Switching • 125-Ω Typical On-State Resistance for 15-V Operation • Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range • On-State Resistance Flat Over Full Peak-to-Peak Signal

QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

QUAD BILATERAL SWITCH

DESCRIPTION The UTC CD4066is a quad bilateral switch which can be applied for switching of analog signals and digital signals. When control input CONT is set to “H” level, the impedance between input and output of the switch becomes low and when it is set to “L” level, the impedance becomes high.

CMOS QUAD BILATERAL SWITCH

文件：547.5 Kbytes Page：20 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.1479 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.16796 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.1479 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.17208 Mbytes Page：26 Pages

CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.17208 Mbytes Page：26 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.1463 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.16796 Mbytes Page：25 Pages

CMOS Quad Bilateral Switch

文件：1.38251 Mbytes Page：33 Pages

Quad Bilateral Switch

文件：169.04 Kbytes Page：8 Pages

Quad Bilateral Switch

文件：114.74 Kbytes Page：9 Pages

Quad Bilateral Switch

文件：169.04 Kbytes Page：8 Pages

Quad Bilateral Switch

文件：169.04 Kbytes Page：8 Pages

Quad Bilateral Switch

文件：114.74 Kbytes Page：9 Pages

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：IC BILATERAL SW 1 X 1:1 14SOIC 集成电路（IC） 信号开关，多路复用器，解码器

封装/外壳：14-DIP（0.300"，7.62mm） 包装：管件 描述：IC BILATERAL SW 1 X 1:1 14DIP 集成电路（IC） 信号开关，多路复用器，解码器

Quad Bilateral Switch

文件：114.74 Kbytes Page：9 Pages

Wide supply voltage range 3V to 15V

文件：115.63 Kbytes Page：9 Pages

Quad Bilateral Switch

文件：114.74 Kbytes Page：9 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.1479 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.16796 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：547.5 Kbytes Page：20 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.1479 Mbytes Page：25 Pages

CMOS QUAD BILATERAL SWITCH

文件：1.17208 Mbytes Page：26 Pages

OR MULTIPLEXING OF ANALOG OR DIGITAL SIGNALS QUAD BILATERAL SWITCH FOR TRANSMISSION

Quadruple Analog Switch/Quadruple Multiplexer

Quadruple bilateral switches

Quadruple bilateral switches

INTEGRATED CIRCUIT BLOCK DIAGRAM

Quad Analog Switch/Quad Multiplexer

Quad Analog Switch/Quad Multiplexer

Quad Analog Switch/Quad Multiplexer

Quad Analog Switch/Quad Multiplexer

Quad Analog Switch/Quad Multiplexer

Quad Analog Switches

COMPLEMENTARY METAL OXIDE SILICON

C2MOS DIGITAL INTERGRATED CIRCUIT SILICON MONOLITHIC

Quad Bilateral Switch

QUAD BILATERAL SWITCH