Real-time operating systems for C166 devices

Features For a comprehensive list of features refer to the C166 RTOS Comparison Table. Here are the highlights: • RTX166 Tiny tasks are integrated into the C166 C Compiler language. The following example shows how tasks are declared: void display_task (void) _task_ 1 • Kernel routines are provi

~90째 wide beam

文件：3.00081 Mbytes Page：4 Pages

IESNA Type II (medium) beam with added house side backlight

文件：2.86483 Mbytes Page：9 Pages

包装：托盘 描述：LENS RECTANG 4POS 50MMD 7MMH 光电器件 光学 - 镜头

Double asymmetric beam for aisle and shelf lighting

文件：2.1783 Mbytes Page：4 Pages

60째 wide beam

文件：2.79462 Mbytes Page：4 Pages

包装：散装 描述：LENS14 POSMM (D) 光电器件 光学 - 镜头

光电附件

~90째 wide beam

文件：18.71328 Mbytes Page：4 Pages

光电附件

~60째 wide beam

文件：18.5732 Mbytes Page：4 Pages

~9째 spot beam with flange. Optimized for high-power 3535 size LED packages.

文件：7.49313 Mbytes Page：6 Pages

光电附件

~20째 40째 oval beam

文件：2.64989 Mbytes Page：5 Pages

Adapter for ANGELA, ANGELINA, ANGELETTE, MOLLY and RONDA-A. Compatible with TE Z45 connector.

文件：8.08197 Mbytes Page：3 Pages

~10째 spot beam

文件：11.34344 Mbytes Page：11 Pages

~25째 wide beam

文件：9.44585 Mbytes Page：7 Pages

~35째 wide beam

文件：8.09599 Mbytes Page：9 Pages

16-Bit Microcontroller

文件：5.07441 Mbytes Page：438 Pages

Silicon MOS IC

MOSFET BROADBAND RF POWER FETs

20 W, 500 MHz MOSFET BROADBAND RF POWER FETs Designed primarily for wideband large–signal output and driver from 30– 500MHz. • Low Crss— 4.5 pF @ VDS= 28 V • MRF166C — Typical Performance at 400 MHz, 28 Vdc Output Power = 20 W Gain = 17 dB Efficiency = 55 • Option

MOSFET BROADBAND RF POWER FETs

20 W, 500 MHz MOSFET BROADBAND RF POWER FETs Designed primarily for wideband large–signal output and driver from 30– 500MHz. • Low Crss— 4.5 pF @ VDS= 28 V • MRF166C — Typical Performance at 400 MHz, 28 Vdc Output Power = 20 W Gain = 17 dB Efficiency = 55 • Option

TMOS BROADBAND RF POWER FET

40 W, 500 MHz TMOS BROADBAND RF POWER FET Designed primarily for wideband large–signal output and driver stages to 500 MHz. • Push–Pull Configuration Reduces Even Numbered Harmonics • Typical Performance at 400 MHz, 28 Vdc Output Power = 40 Watts Gain = 13 dB Efficie

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)