NPN Silicon RF Transistor (For low-noise, high-gain broadband amplifier at colector current from 2mA to 28mA)

NPN Silicon RF Transistor • For low-noise, high-gain broadband amplifier at collector currents from 2 mA to 28 mA • fT = 8 GHz F = 1.2 dB at 900 MHz • Two (galvanic) internal isolated Transistors in one package

NPN Silicon RF Transistor

Low Noise Silicon Bipolar RF Transistor • For low noise, high-gain broadband amplifiers at collector currents from 2 mA to 30 mA • fT = 8 GHz, NFmin = 0.9 dB at 900 MHz • Two (galvanic) internal isolated Transistor in one package • For orientation in reel see package information below • Pb-fr

低噪声RF 管基

NPN 硅射频晶体管，用于集电极电流为 2 mA 至 30 mA 的低噪声、高增益宽带放大器 • 适用于低噪声、高增益宽带放大器，集电极电流从 2 mA 到 30 mA\n• 一个封装中有两个（电流）内部隔离晶体管\n• 无铅（符合 RoHS 标准）封装;

Qualification report according to AEC-Q101 available

文件：566.24 Kbytes Page：6 Pages

NPN Silicon RF Transistor

文件：127.27 Kbytes Page：6 Pages

NPN Silicon RF Transistor

文件：127.27 Kbytes Page：6 Pages

Qualification report according to AEC-Q101 available

文件：566.24 Kbytes Page：6 Pages

NPN high-voltage transistors

DESCRIPTION NPN transistors in a TO-92 plastic package. PNP complement: BF488 FEATURES • Low feedback capacitance. APPLICATIONS • Intended for use in video output stages in black-and-white and in colour television receivers.

Infrared Emitting Diode

■ Features 1. Narrow beam angle (∆θ : TYP. ± 13˚) 2. Radiant flux ( Φ e : MIN. 0.7mW at I F = 20mA) 3. Compact, high reliability by chip coating (GL480Q/GL483Q ) 4. Long lead type (GL483Q) ■ Applications 1. Copiers 2. Floppy disk drives 3. Optoelectronic switches

Silicon NPN Transistor RF Power Output for Mobile Use, PO = 18W @ 866MHz

Description: The NTE483 is a 12.5 Volt epitaxial silicon NPN planer transistor designed for primarily for 800MHz mobile communications. This device utilizes matched input technology (Tuned Q) to increase bandwidth and power gain over the complete range of 806–866MHz. Features: • Designe

Enhanced Low EMI Half-Duplex RS-485 Transceiver

DESCRIPTION The SP483E is a half-duplex transceiver that meets the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. ■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable for Multi-Drop configurations ■ Enhanced ESD Specifications: +15KV Human Body M

Enhanced Low EMI Half-Duplex RS-485 Transceiver

DESCRIPTION The SP483E is a half-duplex transceiver that meets the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. ■ +5V Only ■ Low Power BiCMOS ■ Driver/Receiver Enable for Multi-Drop configurations ■ Enhanced ESD Specifications: +15KV Human Body M