1MHz CMOS RAIL-TO-RAIL IO OPAMP WITH RF FILTER

DESCRIPTION The AO321V have a high gain-bandwidth product of 1MHz, a slew rate of 0.6V/μs, and a quiescent current of 40μA/amplifier at 5V. The AO321V is designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The inpu

1MHz CMOS RAIL-TO-RAIL IO OPAMP WITH RF FILTER

DESCRIPTION The AO321V have a high gain-bandwidth product of 1MHz, a slew rate of 0.6V/μs, and a quiescent current of 40μA/amplifier at 5V. The AO321V is designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The inpu

1MHz CMOS RAIL-TO-RAIL IO OPAMP WITH RF FILTER

DESCRIPTION The AO321V have a high gain-bandwidth product of 1MHz, a slew rate of 0.6V/μs, and a quiescent current of 40μA/amplifier at 5V. The AO321V is designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The inpu

1MHz CMOS RAIL-TO-RAIL IO OPAMP WITH RF FILTER

DESCRIPTION The AO321V have a high gain-bandwidth product of 1MHz, a slew rate of 0.6V/μs, and a quiescent current of 40μA/amplifier at 5V. The AO321V is designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The inpu

1MHz CMOS RAIL-TO-RAIL IO OPAMP WITH RF FILTER

DESCRIPTION The AO321V have a high gain-bandwidth product of 1MHz, a slew rate of 0.6V/μs, and a quiescent current of 40μA/amplifier at 5V. The AO321V is designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The inpu

Plug-in terminal strip Screw connection & socket

The plug-in terminal strip 321-B is available in 10 mm pitch with 1 to 12 poles. It has one screw connection per pole and one plug connection for a terminal strip with pins. The special moulding houses a spring-loaded terminal body with six slots and is protected against accidental contact. A

Screw/solder terminal strip Screw/solder tag connection, side of solder tag closed, pottable

The screw/solder terminal strip 321-LFS in 10 mm pitch was designed for larger cross-sections than version 302-LF-DS. It is available with 1 to 12 poles. Mouldings of this type are encapsulated on the solder tag side and therefore particularly well suited for potting. Socket and solder tag are

Premier Supplier of Electronic Hardware

文件：5.0379 Mbytes Page：60 Pages

MINIATURE FUSES - 5x25mm

文件：71.73 Kbytes Page：2 Pages

General Purpose Tweezers

文件：3.67611 Mbytes Page：4 Pages