MINIATURE FUSES - 5x25mm

文件：71.73 Kbytes Page：2 Pages

Premier Supplier of Electronic Hardware

文件：5.0379 Mbytes Page：60 Pages

包装：散装 描述：BATT SILVER OXIDE 1.55V 电池产品 非充电电池（一次电池）

描述：TEST LEAD GATOR TO GATOR 20\ 测试与计量 测试引线 - 跳线，专用型

200 V - 1,000 V Three Phase Bridge 4.0 A - 5.0 A Forward Current 70 ns - 3000 ns Recovery Time

200 V - 1,000 V Three Phase Bridge 4.0 A - 5.0 A Forward Current 70 ns - 3000 ns Recovery Time

MICROPOWER, ULTRA-SENSITIVE HALL-EFFECT SWITCHES

MICROPOWER, ULTRA-SENSITIVE HALL-EFFECT SWITCHES The A3209Ex and A3210Ex integrated circuits are ultra-sensitive, pole independent Hall-effect switches with a latched digital output. They are especially suited for operation in battery-operated, hand-held equipment such as cellular and cordles

JETSTAR INKJET ARTWORK FILM STANDARD AND PREMIUM JETSTAR INKJET ARTWORK FILM STANDARD AND PREMIUM

1. Prepare artwork for output. Prepare artwork for output. Prepare artwork for output. The quality of your digital artwork will determine the quality of your positive. The artwork should have smooth lines and edges and be of adequate resolution. A minimum of 720 dpi is recommended (1440 dpi is

Plug - PP-H 2,5/1-M GNYE

Plug, nom. voltage: 500 V, nominal current: 24 A, connection method: Push-in connection, 1 level, Rated cross section: 2.5 mm², cross section: 0.14 mm² - 4 mm², color: green-yellow Product Description Connector element center, left housing with engagement pin, right opened without cover Yo

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

End cover - D-PTT 2,5-2MT-0,8 OG

End cover, Length: 92.4 mm, Width: 0.8 mm, Height: 39.5 mm, Color: orange

End cover - D-PTT 2,5-2MT-0,8

End cover, Length: 92.4 mm, Width: 0.8 mm, Height: 39.5 mm, Color: gray

Knife disconnect terminal block - PT 1,5/S-MT

Knife disconnect terminal block, nom. voltage: 400 V, nominal current: 10 A, 1 level, connection method: Push-in connection, Rated cross section: 1.5 mm², cross section: 0.14 mm² - 1.5 mm², mounting: NS 35/7,5, NS 35/15, color: gray Your advantages In addition to the testing facility in the

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

End cover - D-PTT 1,5/S-2MT-0,8

End cover, Length: 86 mm, Width: 0.8 mm, Height: 34.9 mm, Color: gray

End cover - D-PTT 1,5/S-2MT-0,8 OG

End cover, Length: 86 mm, Width: 0.8 mm, Height: 34.9 mm, Color: orange

End cover - D-PTTBS 2,5-2MTB

End cover, Length: 127.5 mm, Width: 0.8 mm, Height: 56.6 mm, Color: gray

321-0433 NetScout Compatible Transceiver SFP 1000Base-LX (1310nm, SMF, 10km)

Features ATGBICS 321-0433 1000Base-LX supports a distance of up to 10km over single mode fibre (SMF) using a wavelength of 1310nm via an LC connector.  Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver.  Our pro

321-0434 NetScout Compatible Transceiver SFP 10/100/1000Base-T (RJ45, Copper, 100m)

Features ATGBICS 321-0434 SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100m. NetScout 1000BASE-T SFP modules support 10/100/1000 auto negotiation and auto MDI/MDIX. Our product meets the specification of NetScout 321-0434= and we proudly offer

321-0435 NetScout Compatible Transceiver SFP 1000Base-SX (850nm, MMF, 550m)

Features ATGBICS 321-0435 1000Base-SX supports a distance of up to 550m over multi-mode fibre (MMF) using a wavelength of 850nm via an LC connector. Digital optical monitoring (DOM) support is also present enabling real-time monitoring of the parameters of the fibre optic transceiver. It is a h

PIDG TERMINALS & SPLICES

FEATURES AND BENEFITS • Made of high conductivity copper; tin-plated for optimal corrosion protection • Copper sleeve for vibration resistance and improved wire insulation support • Body has inner serrations for maximum electrical contact and tensile strength • Insulation sleeves are color-cod

End cover - D-PTTBS 2,5-TWIN

End cover, length: 111.8 mm, width: 2.2 mm, height: 45.8 mm, color: gray

End cover - D-PTTBS 2,5-QUATTRO

End cover, Length: 115.2 mm, Width: 2.2 mm, Height: 45.8 mm, Color: gray

Shield connection - HSH-METALL

Shield connection, material: Metal, Suitable for PH 2,5/... cable housings, color: silver/black

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

Interface Connectors with 0.8mm spacing Docking Connectors

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

15-Pin Connectors for I/O Card Interfaces

GENERAL The 3200 Series of connectors wass developed for use at the interface side of I/O cards and can be used with type I and type II cards. A frame kit has also been developed as an associated product. APPLICATIONS These connectors can be used in applications such as a wide variety of I/

QUAD 2-INPUT NAND GATE

Quad 2-Input NAND Gate

QUAD 2-INPUT NAND GATE

Quad 2-Input NAND Gate

Quad 2-Input NAND Gate

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

QUAD 2-INPUT NAND GATE

QUAD 2-INPUT NAND GATE

Quad 2-Input NAND Gate

Quad 2-Input NAND Gates

Ouadruple 2-input Positive NAND Gates

Quadruple 2-Input NAND Gates

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

Quadruple 2-Input NAND Gates

TRANSISTOR TRANSISTOR LOGIC

Quadruple 2input positive-nand gates

Quad 2-Input NAND Gate

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

Quad 2-Input NAND Gate

QUAD 2-INPUT NAND GATE

QUADRUPLE 2-INPUT POSITIVE-NAND GATES

QUADRUPLE 2-INPUT POSITIVE-NAND GATES