USB Type-C™ Crosspoint Switch with On-chip Microcontroller

Features
4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging
Native

USB Type-C™ Power Delivery v3.0 Controller with De-Mux (USB/DP)

Features
High-speed de-mux (4x6) switching up to 10Gbps
4-lanes DisplayPort outputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, and 8.1Gbps
USB 3.1 signal output (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
USB 1.1 Billboard support
DisplayPort Alterna

USB-C™ Port Controller

Features  USB-PD Support: UFP and DFP - Chunking and unchunking - TCPCI compliant - Fast role swap (FRS) - Integrated VCONN switch - VBUS sense with 36V over current and over voltage protection  USB Billboard class (low speed) - Embedded RISC-V core and secure FW update - 96KB instructi

USB-C™ Port Controller

Features
TCPC-compliant hardware interface
Supports DFP and DRP modes for Host-only or Dual-Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current
AUX CH/SBU Mux
Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto d

USB-C™ Port Controller

Features
TCPC-compliant hardware interface
Supports DFP and DRP modes for Host-only or Dual- Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current
Integrated Billboard
Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS

USB Type-C™ Crosspoint Switch with On-chip Microcontroller

Features
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
Native TCPC-compliant hardware register interface
Supports DFP and DRP modes for Host-only or Dual- Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current

USB Type-C™ Crosspoint Switch with On-chip Microcontroller

BCD to 7-Segment Decoder/Driver with Open-Collector Outputs

General Description The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the data with seven AND/OR gates having open-collector outputs to drive indicator segments directly. Each segment output is guaranteed to sink 24 mA in the ON (LOW)

BCD to 7-Segment Decoder/Driver

The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder /Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving indicators directly. Seven NAND gates and one driver are connected in pairs to make BCD dat

Scotch-Brite??General Purpose Hand pad ??A/O Very Fine, 7447

文件：704.4 Kbytes Page：2 Pages

BCD TO 7-SEGMENT DECODER-DRIVER(Low=on, 40-mA, 30-Volt Outputs)

文件：46.45 Kbytes Page：1 Pages

BCD to 7-Segment Decoders/Drivers

文件：118.73 Kbytes Page：6 Pages