BCD to 7-Segment Decoder/Driver with Open-Collector Outputs

General Description The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the data with seven AND/OR gates having open-collector outputs to drive indicator segments directly. Each segment output is guaranteed to sink 24 mA in the ON (LOW)

BCD to 7-Segment Decoder/Driver

The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder /Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving indicators directly. Seven NAND gates and one driver are connected in pairs to make BCD dat

BCD to 7-Segment Decoders/Drivers

General Description The DM7446A and DM7447A feature active-LOW outputs designed for driving common-anode LEDs or incandescent indicators directly. All of the circuits have full ripple-blanking input/output controls and a lamp test input. Segment identification and resultant displays are shown on

Scotch-Brite??General Purpose Hand pad ??A/O Very Fine, 7447

文件：704.4 Kbytes Page：2 Pages

BCD to 7-Segment Decoders/Drivers

文件：118.73 Kbytes Page：6 Pages

BCD TO 7-SEGMENT DECODER-DRIVER(Low=on, 40-mA, 30-Volt Outputs)

文件：46.45 Kbytes Page：1 Pages

包装：散装 描述：G PURP HAND PAD 7447 6X9\ 工具 磨料和表面修整产品

WE-FI Leaded Toroidal Line Choke

General Properties: Ambient Temperature (referring to IR) -40 up to +65 °C Operating Temperature -40 up to +105 °C Storage Conditions (in original packaging)

WE-TIF Radial Leaded Wire Wound Inductor with 4 Pins

E General information: It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. •Ambient temperature: -40°C to +85°C (refering to IR) •Operating temperature: -40°C to +125°C •Storage temperature (on tape & reel): -20°C to +40°C; 75 RH max

WE-TIF Radial Leaded Wire Wound Inductor with 4 Pins

E General information: It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. •Ambient temperature: -40°C to +85°C (refering to IR) •Operating temperature: -40°C to +125°C •Storage temperature (on tape & reel): -20°C to +40°C; 75 RH max

WE-TIF Radial Leaded Wire Wound Inductor with 4 Pins

E General information: It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. •Ambient temperature: -40°C to +85°C (refering to IR) •Operating temperature: -40°C to +125°C •Storage temperature (on tape & reel): -20°C to +40°C; 75 RH max

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: It is recommended that the temperature of the component does not exceed +125 °C under worst case conditions Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TI Radial Leaded Wire Wound Inductor

WE-TI Radial Leaded Wire Wound Inductor

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TI Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

WE-TIS Shielded Radial Leaded Wire Wound Inductor

General Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +125 °C Storage Conditions (in original packaging)

BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS

BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS