Advanced Digital Audio Matrix

• Individual cross-point level controls. • Non-volatile configuration and crosspoint memory. • Real-time, online configuration and monitoring. • RTS UPL (User Programmable Language) for custom system configurations via pull down menus. • Eight (8) GPIOs standard per frame, may be increased u

包装：盒 描述：ADAPTER BOARD 4DLCD-FT843 开发板，套件，编程器 配件

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

Features Program memory (MTP) ● 2,048 bytes (2,048 x 8bit) ● MTP (Multi Time programming) : 1K * 4, 2K * 2 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ Operating frequency ● 2.4MHz ~ 4MHz ■ Instruction cycle ● fOSC/48 ■ Stop mode ■ Released stop

4-BIT SINGLE CHIP MICROCOMPUTERS

1.1. Features ■ Program memory ● 2,048 bytes (2,048 x 8bit) ● MTP(Multi Time Programming) : 1K * 2, 2K * 1 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ 8-bit Table Read Instruction ■ Oscillator Type (Operating frequency) ● Internal RC Oscillator (typicall

4-BIT SINGLE CHIP MICROCOMPUTERS

1.1. Features ■ Program memory ● 2,048 bytes (2,048 x 8bit) ● MTP(Multi Time Programming) : 1K * 2, 2K * 1 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ 8-bit Table Read Instruction ■ Oscillator Type (Operating frequency) ● Internal RC Oscillator (typicall

4-BIT SINGLE CHIP MICROCOMPUTERS

1.1. Features ■ Program memory ● 2,048 bytes (2,048 x 8bit) ● MTP(Multi Time Programming) : 1K * 2, 2K * 1 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ 8-bit Table Read Instruction ■ Oscillator Type (Operating frequency) ● Internal RC Oscillator (typicall

4-BIT SINGLE CHIP MICROCOMPUTERS

1.1. Features ■ Program memory ● 2,048 bytes (2,048 x 8bit) ● MTP(Multi Time Programming) : 1K * 2, 2K * 1 ■ Data memory (RAM) ● 32 nibble (32 x 4bit) ■ 3 levels of subroutine nesting ■ 8-bit Table Read Instruction ■ Oscillator Type (Operating frequency) ● Internal RC Oscillator (typicall

Intelligent Water Treatment Management Solution Suite

Features ƒ Adaptable and scalable industrial IoT solution for water treatment plants ƒ Platform for data acquisition, aggregation, visualization, and analysis ƒ Real-time monitoring and management of edge equipment, processing unit effectiveness, and discharge water quality standards ƒ Data m

WISE-EdgeLink

Features of EdgeLink • Configure a gateway with Windows utility • Support the collection and forwarding of multiple southb ound and northbound communication protocols, such as MQTT, AMQP, LwM2M, OPC UA, Modbus, IEC 104, DNP 3.0, etc. • ‘One click’ downloads for data communication and network c

WISE-EdgeLink

Features of EdgeLink • Configure a gateway with Windows utility • Support the collection and forwarding of multiple southb ound and northbound communication protocols, such as MQTT, AMQP, LwM2M, OPC UA, Modbus, IEC 104, DNP 3.0, etc. • ‘One click’ downloads for data communication and network c

4-ch Power Relay Module

ADAM-3854 Features High power relays can handle up to 5 A @ 250 VAC and 5 A @ 30 VDC 4 single-pole double-throw (SPDT) relays Industrial screw terminals for easy output wiring LED status indicators Onboard varistor protects relay contact points DIN-rail mounting ADAM-3864

4-channel DIN-rail Mounting Power Relay Module

Introduction ADAM-3854 features four industrial SPDT (Form C) electromechanical power relays and a DIN-rail mount. Each of the relays is controlled by a +24 VDC digital signal and is equipped with an adjacent LED to display its status. Each output is equipped with a varistor that shunts the sur

4-ch Power Relay Module

ADAM-3854 Features High power relays can handle up to 5 A @ 250 VAC and 5 A @ 30 VDC 4 single-pole double-throw (SPDT) relays Industrial screw terminals for easy output wiring LED status indicators Onboard varistor protects relay contact points DIN-rail mounting ADAM-3864

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

PoE Compact System, Supports Intel® Core™ i7/i5/i3 CPU, 4-CH GbE PoE

Features ƒƒ Intel® 3rd Core™ i7/i5/i3 CPU (LGA1155) ƒƒ 4-CH GbE PoE (Power over Ethernet), IEEE 802.3af compliant ––Powered device auto detection and classification ––Supports IEEE 1588 & GigE Vision device ––Compatible with GigE Cameras ƒƒ Compact & thoughtful design ––Volume less than 3 L

Fanless Vision System with Intel® Core™ i Processor, 4-Channel GigE PoE Camera Interface, and PCIe Slot

Features ƒ Intel® 6th Generation Core™ i7 BGA1440 processor ƒ Four-channel Gigabit Power over Ethernet (GbE PoE) ƒ Powered device auto detection and classification ƒ Compliant with IEEE 1588 and IEEE 802.3af standards ƒ Compatible with Gigabit Ethernet (GigE) cameras ƒ Wide input power range

Full Function 64-Axis EtherCAT PCIE Master Card

Features ƒ 667MHz dual-core ARM processor ƒ 2 x EtherCAT ports for high-performance of motion and I/O applications ƒ Supports common motion SDK for rapid application development ƒ Up to 64 axes support for motion control ƒ Supports PTP, linear and circle interpolation, Path table, Compare, La

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

32-ch Isolated Digital I/O Card

Features ƒƒ 32-ch isolated DI/O (16-ch digital input w/ Digital filter, 16-ch digital output) ƒƒ High output driving capacity ƒƒ Interrupt handling capability ƒƒ Connector for isolated input and output channels ƒƒ High-voltage isolation on output channels (2,500 VDC)

8-ch Relay and 8-ch Isolated Digital Input PCI Card

Features ƒƒ PCI-1761: 8 relay output channels and 8 isolated digital input channels ƒƒ PCI-1762: 16 relay output channels and 16 isolated digital input channels ƒƒ LED indicators to show activated relays ƒƒ Output status readback ƒƒ Retained relay output values when hot system reset ƒƒ High-

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

32-ch Isolated Digital I/O with universal output PCI Express Card

Features ƒƒ 16-ch isolated digital input ƒƒ 16-ch isolated digital output for both PNP(source)/ NPN (sink) type ƒƒ High output driving capacity ƒƒ DO type selectable by software ƒƒ High isolation voltage (2,500 VDC)

12-ch Relay PCIe Card

Features ƒƒ 12 relay output channels ƒƒ LED indicators to show activated relays ƒƒ 12 Form C-type relay output channels ƒƒ Output status read-back ƒƒ Keep relay output values after emergency reboot

24-Channel Isolated Digital I/O w/ Counter mPCIe, DB37

Features ƒƒ Meets Advantech iDoor technology standard ƒƒ PCI Express® Mini card specification revision 1.2 compliant ƒƒ Supports wide-input/output voltage (10-30 VDC/5-30 VDC) ƒƒ High over-voltage-protection (70 VDC) and voltage isolation (2,500 VDC) ƒƒ Easy configuration & efficient programm

PoE Compact System, Supports Intel® Core™ i7/i5/i3 CPU, 4-CH GbE PoE

Features ƒƒ Intel® 3rd Core™ i7/i5/i3 CPU (LGA1155) ƒƒ 4-CH GbE PoE (Power over Ethernet), IEEE 802.3af compliant ––Powered device auto detection and classification ––Supports IEEE 1588 & GigE Vision device ––Compatible with GigE Cameras ƒƒ Compact & thoughtful design ––Volume less than 3 L

Fanless Vision System with Intel® Core™ i Processor, 4-Channel GigE PoE Camera Interface, and PCIe Slot

Features ƒ Intel® 6th Generation Core™ i7 BGA1440 processor ƒ Four-channel Gigabit Power over Ethernet (GbE PoE) ƒ Powered device auto detection and classification ƒ Compliant with IEEE 1588 and IEEE 802.3af standards ƒ Compatible with Gigabit Ethernet (GigE) cameras ƒ Wide input power range

3U CompactPCI® Serial Dual Mini PCIe Carrier Board

Features ƒ 3U Height CompactPCI serial interface peripheral board ƒ Dual Mini PCIe module carrier ƒ PICMG CPCI-S.0 CompactPCI® serial spec.

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

DIN-rail Terminal Boards

Features ƒƒ Low cost universal DIN-rail mounting screw terminal module for PC-LabCard™ products with DB9 connector ƒƒ Case dimensions (W x L x H): 77.5 x 45 x 51 mm (3.1 x 1.8 x 2.0)

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

Economic DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K) for trajectory planning (circular trajectory and auto blending are not supported) ƒƒ Supports E-Gear ƒƒ Hardware emergency input ƒƒ Watchdog timer ƒƒ Program

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

Economic DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K) for trajectory planning (circular trajectory and auto blending are not supported) ƒƒ Supports E-Gear ƒƒ Hardware emergency input ƒƒ Watchdog timer ƒƒ Program

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

Basic Motion Control Card with Multi Latch/Compare Trigger Function

Features ƒƒ Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Support velocity motion ƒƒ Supports speed override ƒƒ Supports T/S-curve and programmable acceleration/d

8-ch Relay and 8-ch Isolated Digital Input PCI Card

Features ƒƒ PCI-1761: 8 relay output channels and 8 isolated digital input channels ƒƒ PCI-1762: 16 relay output channels and 16 isolated digital input channels ƒƒ LED indicators to show activated relays ƒƒ Output status readback ƒƒ Retained relay output values when hot system reset ƒƒ High-

16-ch Solid-State Relay Output(for AC) and 16-ch Isolated Digital Input w/ Digital Filter & Interrupt PCIe Card

Features ƒƒ 16-ch solid-state relay (SSR) output with longer lifetime and higher operating speed compared to electro-mechanical relays ƒƒ Zero-crossing (synchronous) trigger for reduced inrush current and electrical noise ƒƒ 16-ch photoMOS relay output with longer lifetime and higher operatin

1MS/s, 16bit, 32-ch Analog Input PCIE Card

Features ƒƒ 32-ch single-ended or 16-ch differential or a combination of analog input ƒƒ 16-bit A/D converter, with up to 1MHz sampling rate ƒƒ Auto calibration ƒƒ Current measurement (0-20mA or 4-20mA) ƒƒ Support digital and analog triggers ƒƒ Multi-card synchronization