4-Axis PC-Based Motion Controller with 32-Channel Digital I/O

Features ƒƒ Intel Celeron J1900 @1.99GHz Processor ƒƒ Encoder input is 10 MHz for 4xAB mode and 2.5 MHz for CW/CCW mode ƒƒ Pulse output of up to 5 Mpps ƒƒ Equipped with a memory buffer (10K points) for trajectory planning ƒƒ Supports E-Gear and helical interpolation ƒƒ Supports E-CAM and pro

Economic DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K) for trajectory planning (circular trajectory and auto blending are not supported) ƒƒ Supports E-Gear ƒƒ Hardware emergency input ƒƒ Watchdog timer ƒƒ Program

4-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting ƒƒ Supports 2 axis linear interpolation ƒƒ Supports 3 axis linear interpolation (PCI-1245LIO only) ƒƒ Su

Value DSP-Based 4/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Supports linear and circular interpolation ƒƒ Hardware emergency input ƒƒ Supports E-Gear ƒƒ Supports programmable acceleration/deceleration rate ƒƒ Memory buffer (up to 10K points) fo

DSP-Based 4/6/8-Axis Stepping and Servo Motor Control Universal PCI Card

Features ƒƒ Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode ƒƒ Pulse output up to 5 Mpps ƒƒ Memory buffer (up to 10K points) for trajectory planning which is designed in DSP ƒƒ Supports E-Gear, and helical interpolation ƒƒ Supports E-CAM providing 256 points to describe the CA

FULL-BRIDGE PWM MICROSTEPPING MOTOR DRIVER

FEATURES ■ ±1.5 A Continuous Output Current ■ 50 V Output Voltage Rating ■ Internal PWM Current Control ■ 3-Bit Non-Linear DAC ■ Fast, Mixed Fast/Slow, and Slow Current-Decay Modes ■ Internal Transient-Suppression Diodes ■ Internal Thermal-Shutdown Circuitry ■ Crossover-Current and UVLO Pr

FULL-BRIDGE PWM MICROSTEPPING MOTOR DRIVER

FEATURES ■ ±1.5 A Continuous Output Current ■ 50 V Output Voltage Rating ■ Internal PWM Current Control ■ 3-Bit Non-Linear DAC ■ Fast, Mixed Fast/Slow, and Slow Current-Decay Modes ■ Internal Transient-Suppression Diodes ■ Internal Thermal-Shutdown Circuitry ■ Crossover-Current and UVLO Pr

Full-Bridge PWM Microstepping Motor Driver

Description The A3955 is designed to drive one winding of a bipolar stepper motor in a microstepping mode. The outputs are rated for continuous output currents to ±1.5 A and operating voltages to 50 V. Internal pulse width modulated (PWM) current control combined with an internal three-bit nonl

FULL-BRIDGE PWM MICROSTEPPING MOTOR DRIVER

FEATURES ■ ±1.5 A Continuous Output Current ■ 50 V Output Voltage Rating ■ Internal PWM Current Control ■ 3-Bit Non-Linear DAC ■ Fast, Mixed Fast/Slow, and Slow Current-Decay Modes ■ Internal Transient-Suppression Diodes ■ Internal Thermal-Shutdown Circuitry ■ Crossover-Current and UVLO Pr

JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm

文件：391.21 Kbytes Page：3 Pages