Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

PRODUCT DESCRIPTION The AD807 provides the receiver functions of data quantization, signal level detect, clock recovery and data retiming for 155 Mbps NRZ data. The device, together with a PIN diode/preamplifier combination, can be used for a highly integrated, low cost, low power SONET OC-3 or S

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

PRODUCT DESCRIPTION The AD807 provides the receiver functions of data quantization, signal level detect, clock recovery and data retiming for 155 Mbps NRZ data. The device, together with a PIN diode/preamplifier combination, can be used for a highly integrated, low cost, low power SONET OC-3 or S

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

FEATURES Meets CCITT G.958 Requirements for STM-1 Regenerator—Type A Meets Bellcore TR-NWT-000253 Requirements for OC-3 Output Jitter: 2.0 Degrees RMS 155 Mbps Clock Recovery and Data Retiming Accepts NRZ Data, No Preamble Required Phase-Locked Loop Type Clock Recovery— No Crystal Required

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

FEATURES Meets CCITT G.958 Requirements for STM-1 Regenerator—Type A Meets Bellcore TR-NWT-000253 Requirements for OC-3 Output Jitter: 2.0 Degrees RMS 155 Mbps Clock Recovery and Data Retiming Accepts NRZ Data, No Preamble Required Phase-Locked Loop Type Clock Recovery— No Crystal Required

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

PRODUCT DESCRIPTION The AD807 provides the receiver functions of data quantization, signal level detect, clock recovery and data retiming for 155 Mbps NRZ data. The device, together with a PIN diode/preamplifier combination, can be used for a highly integrated, low cost, low power SONET OC-3 or S

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

FEATURES Meets CCITT G.958 Requirements for STM-1 Regenerator—Type A Meets Bellcore TR-NWT-000253 Requirements for OC-3 Output Jitter: 2.0 Degrees RMS 155 Mbps Clock Recovery and Data Retiming Accepts NRZ Data, No Preamble Required Phase-Locked Loop Type Clock Recovery— No Crystal Required

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

PRODUCT DESCRIPTION The AD807 provides the receiver functions of data quantization, signal level detect, clock recovery and data retiming for 155 Mbps NRZ data. The device, together with a PIN diode/preamplifier combination, can be used for a highly integrated, low cost, low power SONET OC-3 or S

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

文件：472.08 Kbytes Page：12 Pages

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

文件：472.08 Kbytes Page：12 Pages

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC RECEIVER 0/1 16SOIC 集成电路（IC） 驱动器，接收器，收发器

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC RECEIVER 0/1 16SOIC 集成电路（IC） 驱动器，接收器，收发器

Fiber Optic Receiver with Quantizer and Clock Recovery and Data Retiming

文件：472.08 Kbytes Page：12 Pages

Audio Broadcast Quality 800A Series

Features Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with hardware. Includes wire leads (minimum length of 4). Frequency response +/- 0.5 db max. from 50 Hz. to 15 Khz. Insertion loss of apx. 1 db. Maximum power level +15 dbm. (except 841A, 842A & 84

807 Series High Temp Card Edge Connector | Green | 0.156 (3.96mm) Pitch | 0.200 (5.08mm) Row Spacing | Low Profile Insulator

Features 0.156 (3.96mm) Contact Spacing by 0.200 (5.08mm) Row Spacing Accepts .062 (1.57mm) Nominal Thickness P.C. Board Low Profile Insulator Body, 0.473 (12.01mm) Contact Termination Options include P.C. Tail, Wire Hole, Wire Wrap, 90 and Extender Board Bends Single or Dual Row Configuratio

Surface Mount Back Boxes

文件：104.21 Kbytes Page：2 Pages

Low Cost, 8W DIP Wide Input Range DC/DC Converters

文件：196 Kbytes Page：2 Pages