4 x 1U and 1 x 1.5U \"Tab\" Silicone Keycap Molds - MX Compatible Switches

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has four \"1U R2\" (e.g. single square escape-key-like) molds and one 1.5U Tab Keycap Molds. \n\nWe recommend UV-curable resin, yes you'll need a UV lamp, but it'

包装：散装 描述：PIN .025\ 原型开发，制造品 配件

包装：散装 描述：4 X 1U AND 1 X 1.25U TAB SILICON 创客/DIY，教育 原型开发，制造品

WIRE WRAP PIN

文件：269.88 Kbytes Page：1 Pages

Mini-ITX SBC with LGA1151 Socket 6th/7th Gen Intel® Core™ Processor, Intel® H110/Q170, HDMI/DisplayPort/VGA/LVDS/eDP, Dual LANs and USB 3.0

Features ● LGA1151 socket 6th/7th gen Intel® Core™ i7/i5/i3, Pentium® & Celeron® processor (Skylake/Kaby Lake) ● Intel® H110/Q170 chipset ● 2 DDR4-2133 Long-DIMM, up to 32GB ● 1 PCIe x16 slot ● 1 PCI Express Mini Card slot and SIM card slot ● 3 SATA-600 and 1 mSATA ● 4 USB 3.0 and 4 USB 2.0

Mini-ITX SBC with LGA1151 9th/8th Gen Intel® Core™ i7/i5/i3 Processor, Dual DisplayPort, HDMI, LVDS, USB 3.0, mSATA, M.2 and Dual GbE LAN

Features ● LGA1151 9th/8th gen Intel® Core™ i7/i5/i3 processor ● Intel® H310 chipset ● 2 DDR4 SO-DIMM for up to 32GB of memory ● 4 USB 3.0 and 4 USB 2.0 ● 4 COM ports ● 3 SATA-600 and 1 mSATA ● PCIe x16 and M.2 Key E

USB Type-C 16P Female Right Angle SMD Type 5077CR-16-SMEH-XX-U34-TR

USB Type-C Female Mid-Mount 1.0mm With Peg, Single Row, Surface Mount 5077CR-16-SMM2-XX-TR

Push-Pull FET Driver with Integrated Oscillator and Programmable Clock Output

General Description The MAX5077 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator used in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative or p

Push-Pull FET Driver with Integrated Oscillator and Programmable Clock Output

General Description The MAX5077 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator used in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative or p

LOW PROFILE T-1 SOLID STATE LAMPS

DESCRIPTION These solid state indicators offer a variety of color selection. The High Efficiency Red, Green and Yellow devices are made with a gallium arsenide phosphide LED on gallium phosphide substrate. All are encapsulated in epoxy packages. Their low profile, small size (approximately T-1 si

Power amplifier controller for GSM and PCN systems

FEATURES • CMOS low-voltage, low-power • Can be used in burst mode with power-down • 3-wire serial bus interface with the bus available in Power-down mode • On-chip ramp generator for 256 different power levels with two dynamic ranges • Two programmable regulator start conditions (VKICK and V

LOW PROFILE T-1 SOLID STATE LAMPS

文件：256 Kbytes Page：3 Pages