FEATURES

• CMOS low-voltage, low-power

• Can be used in burst mode with power-down

• 3-wire serial bus interface with the bus available in Power-down mode

• On-chip ramp generator for 256 different power levels with two dynamic ranges

• Two programmable regulator start conditions (VKICK and VHOME)

• Programmable analog output voltage limitation

• Ramping speed depending on the 13 MHz system frequency clock for Global System for Mobile communications (GSM) and Personal Communications Network (PCN)

• Low swing input buffer for the 13 MHz master clock

• Compatible to a large number of different RF power modules

• Programmable temperature matching

• Dual supply concept for analog and digital part

• No external filter for suppression of clock pulse feed through

• Direct power control with ramping function (control loop can be switched off)

• On-chip Power-on reset for all registers

• Serial bus is compatible to bus systems independent of additional clock pulse after rising edge of strobe signal

• Low operating current consumption

• TTL compatible interface

• Programmable gain factor for sensor signal at OP1

• Two different voltages for 1 LSB of the burst power Digital-to-Analog Converter (DAC) are programmable.