丝印代码：U7884；UCC278X4 High-Speed, 230V Half-Bridge Driver with 3.5A, 4A Drive Strength and up to 100V/ns Noise Immunity

1 Features • Dual independent inputs for high-side and low-side drivers with interlock (UCC27834) or no interlock (UCC27884) • Maximum bootstrap voltage: +230V (HB pin) • VDD bias recommended range: 8.5V to 20V • Peak output current: 3.5A source, 4A sink • Fast propagation delay: 29ns typic

丝印代码：U7884Q；UCC278X4-Q1 High-Speed, Automotive 230V Half-Bridge Driver With 3.5A, 4A Drive Strength and up to 100V/ns Noise Immunity

1 Features • AEC-Q100 qualified for automotive applications – Device temperature grade 1 • Dual independent inputs for high-side and lowside drivers with interlock (UCC27834-Q1) or no interlock (UCC27884-Q1) • Maximum bootstrap voltage: +230V (HB pin) • VDD bias recommended range: 8.5V to 2

Complementary Plastic Silicon Power Transistors

BD787 -> NPN BD788 -> PNP 4 AMPERE POWER TRANSISTORS COMPLEMENTARY SILICON 60 VOLTS 15 WATTS . . . designedfor lower power audio amplifier and lowcurrent, high–speed switching applications. • Low Collector–Emitter Sustaining Voltage VCEO(sus)60 Vdc (Min) — BD787, BD78

POWER TRANSISTORS COMPLEMENTARY SILICON

Complementary Plastic Silicon Power Transistors These devices are designed for lower power audio amplifier and low current, high−speed switching applications. Features • Low Collector−Emitter Sustaining Voltage − VCEO(sus)60 Vdc (Min) • High Current−Gain − Bandwidth Product fT=

CATV amplifier module

General description Hybrid high dynamic range amplifier module in a SOT115J package operating at a supply voltage of 24 V (DC). The module consists of two cascaded stages both in cascode configuration. Features ■ Excellent linearity ■ Extremely low noise ■ High gain ■ Excellent return loss p

PNP SILICON PLANAR MEDIUM POWER HIGH GAIN TRANSISTOR

FEATURES * Low equivalent on-resistance; RCE(sat) 93mΩ at 3A * Gain of 300 at IC=2 Amps and Very low saturation voltage APPLICATIONS * Battery powered circuits

Integrated Circuit IF System for FM Receiver

Description: The NTE788 is a monolithic integrated circuit in a 16–Lead DIP type package that provides all the functions of a comprehensive FM–IF system. This device features a three–stage FM–IF amplifier/limiter configuration with level detectors for each stage, a doubly–balanced quadrature FM